Editing Ext2 on microSD card

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

'''DISCLAIMER: By changing system's internals like described in that article you can easily brake you device! Do at your own risk! Do not type in terminal commands you do not understand! You are fully responsible for your actions.'''

'''WARNING!''' Formatting your MicroSD card to another file system will erase all data on it! Backup the data first!

If you want to format your MicroSD card with ext2 file system to get permissions, symlink/hardlink and big files (bigger than 2 gigabytes) support you have to do the following:

===Format the cart into ext2===

Everything have to be performed [[root access|as root]]!
First make sure that you have e2fsprogs package installed
 apt-get install e2fsprogs
Check your MicroSD card's device name (I think it have to be the same on all N900's, but it is worth to recheck which device you are going to format anyway)
 mount | grep /media/mmc1
The output have to contain something like that:
 /dev/mmcblk1p1 on /media/mmc1
here <code>/dev/mmcblk1p1</code> is the MicroSD's card device name.
Then unmount your MicroSD card:
 umount /media/mmc1/

Mark the card partition type as Linux 83
 sfdisk -c /dev/mmcblk1 1 83

Format the card:
 mkfs.ext2 /dev/mmcblk1p1

Now you can try to mount the card manually
 mount -t ext2 /dev/mmcblk1p1 /media/mmc1/
To fix permissions problem you can do the following:
 chown -R user:users /media/mmc1/

===Make the card to be automounted by system===

As described here [http://forums.internettablettalk.com/showpost.php?p=510591&postcount=16] and here [http://forums.internettablettalk.com/showpost.php?p=510591&postcount=16] you have to do the following:
*Become root
*Back up the file <code>/usr/sbin/osso-mmc-mount.sh</code>
*Use vi or your favourite editor to edit <code>/usr/sbin/osso-mmc-mount.sh</code>
*Make this change (it is line 46 on [[Maemo 5/PR1.1|PR1.1]] and [[Maemo 5/PR1.2|PR1.2]])
Old:
 b | c | e | 4 | 6 | 14 | 16 | 1b | 1c | 1e)
New:
 b | c | e | 4 | 6 | 14 | 16 | 1b | 1c | 1e | 83)
*Save the file
*Back up the file <code>/usr/sbin/mmc-mount</code>
*Use vi or your favourite editor to edit <code>/usr/sbin/mmc-mount</code>
*Make the file to contain the following:
<source lang="bash">#!/bin/sh
mount -t vfat -o $3,noauto,nodev,noexec,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed,dmask=000,fmask=0133,rodir "$1" "$2" > /dev/null || mount -t ext2 -o $3,noauto,noatime,nodiratime "$1" "$2" > /dev/null
</source>
'''NOTE''' Patola [http://forums.internettablettalk.com/showpost.php?p=574704&postcount=17] originally suggested to modify the file that way:
<source lang="bash">
#!/bin/sh
mount -t vfat -o $3,noauto,nodev,noexec,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed,dmask=000,fmask=0133,rodir "$1" "$2" > /dev/null || mount -o $3,noauto,noatime,nodiratime "$1" "$2" > /dev/null
</source>
This way, if mmc-mount is unable to mount it as a vfat card, with all the options, it tries to mount the card with the filesystem type autodetected. But I've mentioned that it does not work if you don't have loaded kernel module of the file system you are going to use. So if you want to use that approach you have to take care that you have ext2's kernel module loaded before the execution of that script.

Save the file and reboot, now the card have to be mounted automatically in all cases.

[[Category:Power users]]
[[Category:N900]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Ambox (view source) (semi-protected)

Retrieved from "http://wiki.maemo.org/Ext2_on_microSD_card"

@@ Line 1: / Line 1: @@
-{{ambox|text='''DISCLAIMER: By changing system's internals like described in that article you can easily break you device!'''
+'''DISCLAIMER: By changing system's internals like described in that article you can easily brake you device! Do at your own risk! Do not type in terminal commands you do not understand! You are fully responsible for your actions.'''
-Do so at your own risk! Do not type in terminal commands you do not understand! You are fully responsible for your actions.}}
 '''WARNING!''' Formatting your MicroSD card to another file system will erase all data on it! Backup the data first!

Personal tools

Navigation

Views

Editing Ext2 on microSD card