Mer/Documentation/Making x86 Mer Bootable

(→Making a x86 Mer bootable)
({{Mer}})
 
Line 1: Line 1:
 +
{{Mer}}
 +
== Making a x86 Mer bootable ==
== Making a x86 Mer bootable ==
Line 11: Line 13:
* Verify your <code>/mnt/mer/boot/grub/menu.lst</code> looks correct
* Verify your <code>/mnt/mer/boot/grub/menu.lst</code> looks correct
* <code>umount /mnt/mer</code> (if you can)
* <code>umount /mnt/mer</code> (if you can)
-
 
-
 
-
[[Category:Mer]]
 

Latest revision as of 12:12, 22 September 2010

Image:Mer infobox icon.png
 Mer is back : Please visit http://www.merproject.org to learn more about this news.


[edit] Making a x86 Mer bootable

Partition your boot device, make a ext3 partition. In the following, sda1 is your ext3 partition and sda is your boot device. Only install this on a USB stick or whatever that you want to have possibly destroyed. 

mkdir -p /mnt/mer
mkfs.ext3 /dev/sda1
mount -t ext3 /dev/sda1 /mnt/mer
  • Grab a release x86-generic tar.gz and put in /mnt/mer, tar pzvxf it from within /mnt/mer or use the imager from above and sh imager targets/mer-x86-generic-only-fs /mnt/mer. 
grub-install --no-floppy --recheck --root-directory=/mnt/mer /dev/sda
chroot /mnt/mer update-grub
  • Verify your /mnt/mer/boot/grub/menu.lst looks correct
  • umount /mnt/mer (if you can)
Retrieved from "http://wiki.maemo.org/Mer/Documentation/Making_x86_Mer_Bootable"