Editing Mer/Releases/0.13testing3

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

By using these testing images, you're '''morally obligated to test them''' and to edit this page and report -every single bug you find-, no matter if they're theme flaws, quirks, bugs or crashes. You can optionally also use [https://bugs.maemo.org/enter_bug.cgi?product=Mer bugzilla] , use version 0.13.

'''Please send the bug report urls to mer-chatter (see [[Mer/Awareness]] ) as well and share your bugs, testing experiences.'''

Test master is Meizirkki, and can be found in #mer on irc.freenode.net usually and you can ask him if there's some specialized areas that need testing. Take [http://wiki.maemo.org/Mer/Sprints/0.13#Component:_Testing these testing things first]. If you are testing, go to #mer anyway. Good place to be.

These images will not be the only ones this week. In N8x0 installer, when it asks for URL=, write URL=http://the.image.intended. Instructions on [[Mer/Releases/0.12]] still apply.

[http://stskeeps.subnetmask.net/mer/0.13testing3/mer-x86-generic-image-v0.13testing3.vmdk.zip Mer X86 VMDK]

[http://stskeeps.subnetmask.net/mer/0.13testing3/mer-x86-generic-image-v0.13testing3.tar.gz Mer X86 rootfs version]

[http://stskeeps.subnetmask.net/mer/0.13testing3/mer-armel-n8x0-image-v0.13testing3.tar.gz Mer N8x0, rootfs version]

[http://stskeeps.subnetmask.net/mer/0.13testing3/mer-armel-smartq5.SmartQ5 Mer for SmartQ5, firmware version]

== Release notes ==

'''N8x0:'''

* JFFS2 and it's associated kernel needs testing
* Standard kernel needs testing
* Verify touchscreen works

'''SmartQ5:'''

* THIS IS A EXPERIMENTAL IMAGE AND NOT FINISHED AT ALL AND THERE IS NO WARRANTY.
* IT IS A TESTING IMAGE AND FOR DEVELOPMENT PURPOSES, BUT IS PUBLIC TO ENCOURAGE EXPERIMENTATION
* THIS IMAGE IS MADE BY THE MER PROJECT AND IS NOT SMARTDEVICES OFFICIAL FIRMWARE
* To install, put the firmware image on a SD card, on the first partition, a FAT32 one, and name the firmware image SmartQ5. Then, hold down + button and insert charger
* It will be accessible over USB networking [http://wiki.maemo.org/USB_networking#Host_USB_Network_Configuration (see instructions here)] with a SSH server, login root, password rootme
* It will not show a splash screen, but it will after darkness then make the screen white, and eventually, make it the Mer background and first boot wizard. 
* There is currently a problem with closing dialogs (will be fixed in testing4).

To get wireless networking to work (from https://wiki.ubuntu.com/Marvell8686Firmware):

1. Grab the firmware package from Marvell here: http://www.marvell.com/drivers/driverDisplay.do?driverId=203 and copy it to your computer.

2. Extract the downloaded zip file, then extract SD-8686-FEDORA26FC6-SYSKT-GPL-9.70.3.p24-26409.P45.tar within it. Extract the FwImage folder.

3. Inside there are two files, helper_sd.bin and sd8686.bin. Rename helper_sd.bin to sd8686_helper.bin and copy to your SD card

4. In Mer on SmartQ, open X-Terminal and:

<pre>
$ sudo mount -t vfat /dev/mmcblk1p1 /media
(password is the one you used when installing)
$ sudo cp /media/sd8686.bin /lib/firmware/sd8686.bin
$ sudo cp /media/sd8686_helper.bin /lib/firmware/sd8686_helper.bin
$ sudo umount /media
</pre>

5. Reboot. There is a problem with WPA2 networks (they're greyed out, feel free to find out why).

6. Report all bugs you find :)

== Bugs in testing2 ==

'''SmartQ5''' version:

+ wifi driver install fix -> okay

+ no wpa2 -> confirmed -> manual settings via /etc/network/interfaes with wpa supplicant DO work

+ ctrl key in x-term not affecting input (no modifier picked up?)

+ usbhostmode disabled, cannot use external keyboard (can be activated manually)

+ shutdown/reset/suspend. smartq5 seems unable to turn off, only reset, if plugged in, but some form of shutdown is necessary anyway.

+ no external button functions -> should be just work in progress, function is far from defined anyhow.

+ after long period of inactivity, screen is garbled when comes back up from 'sleep'/low power mode.

+ "launching application" notification does not round nicely on the right hand side (seems too long, so it gets cut off)

+ lack of navigation keys on keyboard means NO dpad function. other keyboards such as matchbox/cellwriter can do this, but the return keys do not function as expected.

== Bugs in testing1 ==

* Hardware keyboard/slider events on N810 when device is in standby only turns on backlight, and doesn't unblank the screen.  Touchscreen events work fine in this respect.
** /etc/powerlaunch/scripts/kb_light should be in sudoers NOPASSWD
* Touchscreen using xf86-input-tslib does not work (N8x0, SmartQ). Fix will be in testing2 image (redownload image and it should be fixed)
* Brightness applet makes hildon crash (not always) http://pastebin.ca/1418638
* Freezing at shutdown if the command is given from the new gui
* Enhancement: jffs2 images, kernels, etc. 
** Potential fix: Edit kernel-diablo in Maemo:Mer:Devel:HW:N8x0:Devel to include a variant (like -oprofile or such) that is built to sed CONFIG_CMDLINE from 'CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 ro console=tty0 console=ttyMTD5" to:'CONFIG_CMDLINE="root=1f04 rootfstype=jffs2 init=/sbin/tablet-init ro console=tty0 console=ttyMTD5"'
*** Added in kernel-diablo
* Minor issues:
** [0.12, not verified to be in 0.13testing1] /etc/init.d/powered produces a message similar to ‘[: 105: false: invalid operator’.  The fix is to change ‘==’ to ‘=’ in all lines of the form ‘[ "$FOO" == "true" ]’.  (Just search for ‘==’ in all init.d scripts.)
*** Fixed in powerlaunch 0.9.2mer8
** [0.12, not verified to be in 0.13testing1] Near the top of /usr/sbin/set_dim_and_blank.py is ‘if dim > blank: print "Dim must be >= blank"’; the message should say ‘<=’ rather than ‘>=’. 
*** Fixed in dsme-tools 0.8

====x86 VMDK====
* Text in text fields can not be drag-selected (cursor jumps to start of field instead)
* Applications installed prompt for folder location but are always stored in Extras
** Artifact of Fremantle Application Manager i think
*** (Irrelevant.  It's a bug)
* Organize dialog nonresponsive to any input
* Locale hardcoded to en_GB.utf8 (?) 
** There is a .current-locale feature, needs control panel (+ reboot), look in /usr/bin/start-hildon
*** the file is ~/.osso/current-locale and it doesn't work.
* Terminal menu text is not replaced with localized text - e.g. "webameedit - webamecopy" etc.
* Terminal toolbar Ctrl button non-functional (try Ctrl + d, Ctrl + h, Ctrl + g, Ctrl + c)
** Work on including patches in libvte on garage.maemo.org/projects/osso-xterm into vte - there's some not included yet.
* Terminal toolbar (likely other) has significanly misaligned background image when selected.
** Icon sizes are changed in Fremantle, so a theme issue probably
*** no.  There are no icons on the toolbar.  Screenshot: [http://www.quicksnapper.com/JMarkevich/image/toolbar-bug Toolbar Bug] (this has been a persistent bug in Maemo, though mostly for all python programs, evidently)

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Ambox (view source) (semi-protected)
Template:Mer (view source) (semi-protected)

Retrieved from "http://wiki.maemo.org/Mer/Releases/0.13testing3"

Personal tools

Navigation

Views

Editing Mer/Releases/0.13testing3

@@ Line 30: / Line 30: @@
 * IT IS A TESTING IMAGE AND FOR DEVELOPMENT PURPOSES, BUT IS PUBLIC TO ENCOURAGE EXPERIMENTATION
 * THIS IMAGE IS MADE BY THE MER PROJECT AND IS NOT SMARTDEVICES OFFICIAL FIRMWARE
-* SmartDevices has kindly provided source code for their bootloader and kernel and firmware maker - thanks to them! Their open attitude is excellent and it should be awarded.
 * To install, put the firmware image on a SD card, on the first partition, a FAT32 one, and name the firmware image SmartQ5. Then, hold down + button and insert charger
 * It will be accessible over USB networking [http://wiki.maemo.org/USB_networking#Host_USB_Network_Configuration (see instructions here)] with a SSH server, login root, password rootme