Mer/Status/SmartQ5

(New page: Notes on SmartQ 5 MID: rootfs is on mmcblk0 (1G) p1 (rootfs, homefs, swap) booted by uboot)
Line 3: Line 3:
rootfs is on mmcblk0 (1G) p1 (rootfs, homefs, swap)
rootfs is on mmcblk0 (1G) p1 (rootfs, homefs, swap)
booted by uboot
booted by uboot
 +
 +
<code>
 +
Processor : ARMv6-compatible processor rev 6 (v6l)
 +
BogoMIPS : 99.78
 +
Features : swp half thumb fastmult vfp edsp java
 +
CPU implementer : 0x41
 +
CPU architecture: 7
 +
CPU variant : 0x0
 +
CPU part : 0xb76
 +
CPU revision : 6
 +
Cache type : write-back
 +
Cache clean : cp15 c7 ops
 +
Cache lockdown : format C
 +
Cache format : Harvard
 +
I size : 16384
 +
I assoc : 4
 +
I line length : 32
 +
I sets : 128
 +
D size : 16384
 +
D assoc : 4
 +
D line length : 32
 +
D sets : 128
 +
 +
Hardware : SMDK6410
 +
Revision : 0000
 +
Serial : 0000000000000000
 +
</code>
 +
 +
<code>
 +
Linux version 2.6.24.7 (root@gqwang2007-desktop) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #2725 PREEMPT Fri Apr 10 11:46:59 CST 2009
 +
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
 +
Machine: SMDK6410
 +
Ignoring unrecognised tag 0x00000000
 +
Memory policy: ECC disabled, Data cache writeback
 +
On node 0 totalpages: 29184
 +
  DMA zone: 228 pages used for memmap
 +
  DMA zone: 0 pages reserved
 +
  DMA zone: 28956 pages, LIFO batch:7
 +
  Normal zone: 0 pages used for memmap
 +
  Movable zone: 0 pages used for memmap
 +
CPU S3C6410 (id 0x36410101)
 +
S3C6410: core 532.000 MHz, memory 133.000 MHz, peripheral 66.500 MHz
 +
S3C6410: EPLL 192.000 MHz
 +
S3C64XX Clocks, (c) 2007 Samssung Electronics
 +
CPU0: D VIPT write-back cache
 +
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
 +
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
 +
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 28956
 +
Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rootwait splash
 +
Trying to install chained interrupt handler for IRQ0
 +
Trying to install chained interrupt handler for IRQ1
 +
Trying to install chained interrupt handler for IRQ32
 +
Trying to install chained interrupt handler for IRQ33
 +
PID hash table entries: 512 (order: 9, 2048 bytes)
 +
timer tcon=00600000, tcnt 103c3, tcfg 00000400,00000000, usec 00001340
 +
Console: colour dummy device 80x30
 +
console [ttySAC0] enabled
 +
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
 +
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
 +
Memory: 114MB = 114MB total
 +
Memory: 112768KB available (2136K code, 189K data, 492K init)
 +
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
 +
Calibrating delay loop... 530.84 BogoMIPS (lpj=1327104)
 +
Mount-cache hash table entries: 512
 +
CPU: Testing write buffer coherency: ok
 +
net_namespace: 64 bytes
 +
NET: Registered protocol family 16
 +
S3C6410 Power Management, (c) 2008 Samsung Electronics
 +
s3c6410: Initialising architecture
 +
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
 +
Total 32 DMA channels will be initialized.
 +
usbcore: registered new interface driver usbfs
 +
usbcore: registered new interface driver hub
 +
usbcore: registered new device driver usb
 +
NET: Registered protocol family 2
 +
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
 +
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
 +
TCP: Hash tables configured (established 4096 bind 4096)
 +
TCP reno registered
 +
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
 +
io scheduler noop registered
 +
io scheduler cfq registered (default)
 +
S3C_LCD clock got enabled :: 133.000 Mhz
 +
LCD TYPE :: TD043MTEX will be initialized
 +
Window[0] - FB1: map_video_memory: clear ff200000:000bb800
 +
            FB1: map_video_memory: dma=56900000 cpu=ff200000 size=000bb800
 +
fb0: s3cfb frame buffer device
 +
LCD TYPE :: TD043MTEX will be initialized
 +
s3c-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 37) is a S3C
 +
s3c-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 38) is a S3C
 +
s3c-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 39) is a S3C
 +
s3c-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 40) is a S3C
 +
RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize
 +
usbmon: debugfs is not available
 +
Loaded s3c-udc version Apr  9 2009 (DMA Mode)
 +
S3C Touchscreen driver, (c) 2008 Samsung Electronics
 +
S3C TouchScreen got loaded successfully : 12 bits
 +
input: S3C TouchScreen as /devices/virtual/input/input0
 +
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
 +
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
 +
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
 +
s3c64xx-i2c s3c64xx-i2c.0: slave address 0x10
 +
s3c64xx-i2c s3c64xx-i2c.0: bus frequency set to 377 KHz
 +
s3c64xx-i2c s3c64xx-i2c.0: i2c-0: S3C64XX I2C adapter
 +
s3c64xx-i2c s3c64xx-i2c.1: slave address 0x10
 +
s3c64xx-i2c s3c64xx-i2c.1: bus frequency set to 377 KHz
 +
s3c64xx-i2c s3c64xx-i2c.1: i2c-1: S3C64XX I2C adapter
 +
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
 +
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
 +
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
 +
ASoC version 0.13.1
 +
WM8987: Audio Codec Driver v0.12
 +
asoc: WM8987 <-> s3c-i2s mapping ok
 +
Proc-FS interface for audio codec
 +
ALSA device list:
 +
  #0: smdk6400 (WM8987)
 +
TCP cubic registered
 +
NET: Registered protocol family 1
 +
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
 +
input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
 +
input: gpio-keys as /devices/platform/gpio-keys.1/input/input2
 +
s3c2410-rtc s3c2410-rtc: setting system clock to 2009-05-04 17:40:17 UTC (1241458817)
 +
[s3c_hsmmc_probe]: s3c-hsmmc.1: at 0xc7c00000 with irq 57. clk src: sclk_DOUTmpll_mmc1
 +
s3c-hsmmc: card inserted.
 +
[s3c_hsmmc_probe]: s3c-hsmmc.0: at 0xc7e00000 with irq 56. clk src: sclk_DOUTmpll_mmc0
 +
[s3c_hsmmc_probe]: s3c-hsmmc.2: at 0xc8000000 with irq 49. clk src: sclk_DOUTmpll_mmc2
 +
Waiting for root device /dev/mmcblk0p1...
 +
mmc0: host does not support reading read-only switch. assuming write-enable.
 +
mmc0: new high speed SD card at address d555
 +
mmcblk0: mmc0:d555 ST01G 1003264KiB
 +
mmcblk0: p1 p2 p3
 +
mmc2: new SDIO card at address 0001
 +
kjournald starting.  Commit interval 5 seconds
 +
EXT3 FS on mmcblk0p1, internal journal
 +
EXT3-fs: mounted filesystem with ordered data mode.
 +
VFS: Mounted root (ext3 filesystem).
 +
Freeing init memory: 492K
 +
UART err int.
 +
mmc1: host does not support reading read-only switch. assuming write-enable.
 +
mmc1: new high speed SDHC card at address 0002
 +
mmcblk1: mmc1:0002 SD4GB 3948544KiB
 +
mmcblk1: p1 p2 p3
 +
g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
 +
g_file_storage gadget: Number of LUNs=1
 +
g_file_storage gadget-lun0: ro=0, file: /dev/mmcblk1p1
 +
Registered gadget driver 'g_file_storage'
 +
8686 sdio: sd 8686 driver
 +
8686 sdio: Copyright HHCN 2009
 +
Adding 125992k swap on /dev/mmcblk0p3.  Priority:-1 extents:1 across:125992k
 +
EXT3 FS on mmcblk0p1, internal journal
 +
kjournald starting.  Commit interval 5 seconds
 +
EXT3 FS on mmcblk0p2, internal journal
 +
EXT3-fs: mounted filesystem with ordered data mode.
 +
Bluetooth: Core ver 2.11
 +
NET: Registered protocol family 31
 +
Bluetooth: HCI device and connection manager initialized
 +
Bluetooth: HCI socket layer initialized
 +
Bluetooth: L2CAP ver 2.9
 +
Bluetooth: L2CAP socket layer initialized
 +
Bluetooth: RFCOMM socket layer initialized
 +
Bluetooth: RFCOMM TTY layer initialized
 +
Bluetooth: RFCOMM ver 1.8
 +
Bluetooth: SCO (Voice Link) ver 0.5
 +
Bluetooth: SCO socket layer initialized
 +
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
 +
Bluetooth: BNEP filters: protocol multicast
 +
S3C6400 MFC Driver, (c) 2007 Samsung Electronics
 +
S3C6400 MFC driver module init OK.
 +
S3C PostProcessor Driver v3.10, (c) 2008 Samsung Electronics
 +
LCD TYPE :: TD043MTEX will be initialized
 +
LCD TYPE :: TD043MTEX will be initialized
 +
kjournald starting.  Commit interval 5 seconds
 +
EXT3 FS on mmcblk1p3, internal journal
 +
EXT3-fs: mounted filesystem with ordered data mode.
 +
Unregistered gadget driver 'g_file_storage'
 +
ether gadget: using random self ethernet address
 +
ether gadget: using random host ethernet address
 +
usb0: Ethernet Gadget, version: May Day 2005
 +
usb0: using s3c-udc, OUT ep1-bulk IN ep2-bulk STATUS ep3-int
 +
usb0: MAC 3e:aa:ad:4c:0d:43
 +
usb0: HOST MAC ca:98:c6:aa:b1:66
 +
usb0: RNDIS ready
 +
Registered gadget driver 'ether'
 +
usb0: high speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet
 +
LCD TYPE :: TD043MTEX will be initialized
 +
</code>

Revision as of 18:07, 4 May 2009

Notes on SmartQ 5 MID:

rootfs is on mmcblk0 (1G) p1 (rootfs, homefs, swap) booted by uboot

Processor : ARMv6-compatible processor rev 6 (v6l) BogoMIPS : 99.78 Features : swp half thumb fastmult vfp edsp java CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xb76 CPU revision : 6 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 16384 I assoc : 4 I line length : 32 I sets : 128 D size : 16384 D assoc : 4 D line length : 32 D sets : 128

Hardware : SMDK6410 Revision : 0000 Serial : 0000000000000000

Linux version 2.6.24.7 (root@gqwang2007-desktop) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #2725 PREEMPT Fri Apr 10 11:46:59 CST 2009 CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f Machine: SMDK6410 Ignoring unrecognised tag 0x00000000 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 29184

 DMA zone: 228 pages used for memmap
 DMA zone: 0 pages reserved
 DMA zone: 28956 pages, LIFO batch:7
 Normal zone: 0 pages used for memmap
 Movable zone: 0 pages used for memmap

CPU S3C6410 (id 0x36410101) S3C6410: core 532.000 MHz, memory 133.000 MHz, peripheral 66.500 MHz S3C6410: EPLL 192.000 MHz S3C64XX Clocks, (c) 2007 Samssung Electronics CPU0: D VIPT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28956 Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rootwait splash Trying to install chained interrupt handler for IRQ0 Trying to install chained interrupt handler for IRQ1 Trying to install chained interrupt handler for IRQ32 Trying to install chained interrupt handler for IRQ33 PID hash table entries: 512 (order: 9, 2048 bytes) timer tcon=00600000, tcnt 103c3, tcfg 00000400,00000000, usec 00001340 Console: colour dummy device 80x30 console [ttySAC0] enabled Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 114MB = 114MB total Memory: 112768KB available (2136K code, 189K data, 492K init) SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay loop... 530.84 BogoMIPS (lpj=1327104) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 S3C6410 Power Management, (c) 2008 Samsung Electronics s3c6410: Initialising architecture S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics Total 32 DMA channels will be initialized. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered S3C PWM Driver, (c) 2006-2007 Samsung Electronics io scheduler noop registered io scheduler cfq registered (default) S3C_LCD clock got enabled :: 133.000 Mhz LCD TYPE :: TD043MTEX will be initialized Window[0] - FB1: map_video_memory: clear ff200000:000bb800

           FB1: map_video_memory: dma=56900000 cpu=ff200000 size=000bb800

fb0: s3cfb frame buffer device LCD TYPE :: TD043MTEX will be initialized s3c-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 37) is a S3C s3c-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 38) is a S3C s3c-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 39) is a S3C s3c-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 40) is a S3C RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize usbmon: debugfs is not available Loaded s3c-udc version Apr 9 2009 (DMA Mode) S3C Touchscreen driver, (c) 2008 Samsung Electronics S3C TouchScreen got loaded successfully : 12 bits input: S3C TouchScreen as /devices/virtual/input/input0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 s3c64xx-i2c s3c64xx-i2c.0: slave address 0x10 s3c64xx-i2c s3c64xx-i2c.0: bus frequency set to 377 KHz s3c64xx-i2c s3c64xx-i2c.0: i2c-0: S3C64XX I2C adapter s3c64xx-i2c s3c64xx-i2c.1: slave address 0x10 s3c64xx-i2c s3c64xx-i2c.1: bus frequency set to 377 KHz s3c64xx-i2c s3c64xx-i2c.1: i2c-1: S3C64XX I2C adapter S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). ASoC version 0.13.1 WM8987: Audio Codec Driver v0.12 asoc: WM8987 <-> s3c-i2s mapping ok Proc-FS interface for audio codec ALSA device list:

 #0: smdk6400 (WM8987)

TCP cubic registered NET: Registered protocol family 1 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1 input: gpio-keys as /devices/platform/gpio-keys.1/input/input2 s3c2410-rtc s3c2410-rtc: setting system clock to 2009-05-04 17:40:17 UTC (1241458817) [s3c_hsmmc_probe]: s3c-hsmmc.1: at 0xc7c00000 with irq 57. clk src: sclk_DOUTmpll_mmc1 s3c-hsmmc: card inserted. [s3c_hsmmc_probe]: s3c-hsmmc.0: at 0xc7e00000 with irq 56. clk src: sclk_DOUTmpll_mmc0 [s3c_hsmmc_probe]: s3c-hsmmc.2: at 0xc8000000 with irq 49. clk src: sclk_DOUTmpll_mmc2 Waiting for root device /dev/mmcblk0p1... mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new high speed SD card at address d555 mmcblk0: mmc0:d555 ST01G 1003264KiB

mmcblk0: p1 p2 p3

mmc2: new SDIO card at address 0001 kjournald starting. Commit interval 5 seconds EXT3 FS on mmcblk0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Freeing init memory: 492K UART err int. mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address 0002 mmcblk1: mmc1:0002 SD4GB 3948544KiB

mmcblk1: p1 p2 p3

g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007 g_file_storage gadget: Number of LUNs=1 g_file_storage gadget-lun0: ro=0, file: /dev/mmcblk1p1 Registered gadget driver 'g_file_storage' 8686 sdio: sd 8686 driver 8686 sdio: Copyright HHCN 2009 Adding 125992k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:125992k EXT3 FS on mmcblk0p1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on mmcblk0p2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast S3C6400 MFC Driver, (c) 2007 Samsung Electronics S3C6400 MFC driver module init OK. S3C PostProcessor Driver v3.10, (c) 2008 Samsung Electronics LCD TYPE :: TD043MTEX will be initialized LCD TYPE :: TD043MTEX will be initialized kjournald starting. Commit interval 5 seconds EXT3 FS on mmcblk1p3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Unregistered gadget driver 'g_file_storage' ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using s3c-udc, OUT ep1-bulk IN ep2-bulk STATUS ep3-int usb0: MAC 3e:aa:ad:4c:0d:43 usb0: HOST MAC ca:98:c6:aa:b1:66 usb0: RNDIS ready Registered gadget driver 'ether' usb0: high speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet LCD TYPE :: TD043MTEX will be initialized