N900 Hardware Power Consumption

(Some preliminary numbers using bq27200.)
Line 22: Line 22:
with software patches - achieve these.
with software patches - achieve these.
+x indicates the measurement is for that element only. A raw measurement has no +, and is a total.
+x indicates the measurement is for that element only. A raw measurement has no +, and is a total.
 +
Unless otherwise mentioned, numbers are for the idle locked case, with screen off.
* Idle, no SIM, wlan off 4.5mA@4.1V
* Idle, no SIM, wlan off 4.5mA@4.1V
Line 30: Line 31:
* Backlight on max +80mA
* Backlight on max +80mA
* Media player playing mp3, one step above mute. 75mA
* Media player playing mp3, one step above mute. 75mA
-
 
+
* md5sum /dev/zero 175mA
 +
* md5sum /dev/mmcblk1p1 - 1G SD card. 160mA
 +
* md5sum /dev/mmcblk0 - internal MMC 160mA (these indicate the CPU is somewhat idle, waiting on IO, and this counteracts any increased power use by the memory)
[[Category:n900]] [[Category:n900_Hardware]]
[[Category:n900]] [[Category:n900_Hardware]]

Revision as of 09:17, 4 April 2010

This page contains information on the amount of energy used by each subsystem of the n900, and where applicable ways it can be reduced.

Much of any reduction will require additional software, some may be possible by altering user behaviour in ways that don't impact the users overall experience..

Measuring power usage is hard. For example - power consumption of the speakers/speaker-amp has to be disentangled from power consumption of reading a file from SD/emmc, decoding it, pulseaudios power use, and the DAC power use.


Below currents are from l3/l4 manual - assumed to be from a supply at 5V.

  • FMTX 19mA - l3/4
  • WLAN on - no powersave - 200mA
  • WLAN transmit 802.11b - 150mA

Battery parameters can be monitored thru fuel gauge asic TI BQ27200 [1]

Some preliminary numbers using bq27200.

These numbers are biased, and represent best cases. Some have had outliers which may be normal and unavoidable current spikes removed. This is under the assumption that the minimal power represents the minimum power achievable, and it should long-term be possible to - possibly with software patches - achieve these. +x indicates the measurement is for that element only. A raw measurement has no +, and is a total. Unless otherwise mentioned, numbers are for the idle locked case, with screen off.

  • Idle, no SIM, wlan off 4.5mA@4.1V
  • Wifi on with maximum powersaving. +~1.5mA
  • MMC card in. Under 1mA
  • Xchat running, sporadic traffic. +5mA
  • Screen on, no backlight. +50mA
  • Backlight on max +80mA
  • Media player playing mp3, one step above mute. 75mA
  • md5sum /dev/zero 175mA
  • md5sum /dev/mmcblk1p1 - 1G SD card. 160mA
  • md5sum /dev/mmcblk0 - internal MMC 160mA (these indicate the CPU is somewhat idle, waiting on IO, and this counteracts any increased power use by the memory)