Rotation

m (De-linkifying some links)
Line 19: Line 19:
  wget <nowiki>http://outpo.st/rotate/osso-software-version-rx34-unlocked_1:4.2008.30-2_all.deb</nowiki>
  wget <nowiki>http://outpo.st/rotate/osso-software-version-rx34-unlocked_1:4.2008.30-2_all.deb</nowiki>
  dpkg -i osso-software-version-rx34-unlocked_1:4.2008.30-2_all.deb
  dpkg -i osso-software-version-rx34-unlocked_1:4.2008.30-2_all.deb
 +
 +
== Finishing up ==
After following the appropriate steps for your device, continue and run:
After following the appropriate steps for your device, continue and run:

Revision as of 15:00, 11 September 2008

Rotation allows you to change the screen orientation between landscape and portrait to all 4 cardinal directions. You may wish to do this to better view a long page of text, allow for easier left-handed operation, for easier reading of certain websites, or a variety of other purposes.

Unfortunately, rotation support isn't bundled with Maemo even though the tablets support hardware screen rotation. Fortunately, installing the necessary packages for rotation support is a relatively easy process.

Contents

Installing

First, make sure you know what you're doing! Although the steps outlined here are easy to follow and mostly safe, you are working with important system files, and a careless misstep could leaving you in need of a reflash.

These instructions only work for Diablo, so make sure your system is completely up-to-date, and make sure Extras is enabled. Then you will need to get root access, open XTerm and become root.

There are two slightly different sets of packages for the N800 and the N810, so follow the appropriate steps for your device.

N810

Run these commands in XTerm as root:

wget http://outpo.st/rotate/osso-software-version-rx44-unlocked_4.2008.30-2_armel.deb
dpkg -i osso-software-version-rx44-unlocked_4.2008.30-2_armel.deb

N800

Run these commands in XTerm as root:

wget http://outpo.st/rotate/osso-software-version-rx34-unlocked_1:4.2008.30-2_all.deb
dpkg -i osso-software-version-rx34-unlocked_1:4.2008.30-2_all.deb

Finishing up

After following the appropriate steps for your device, continue and run:

wget http://outpo.st/rotate/kernel-diablo-flasher_2.6.21-200829maemo1_all.modfied.deb http://outpo.st/rotate/xserver-xomap_1.3.99.0~git20070321-0osso20074202_armel.modfied.deb
apt-get install advanced-backlight
dpkg -i kernel-diablo-flasher_2.6.21-200829maemo1_all.modfied.deb xserver-xomap_1.3.99.0~git20070321-0osso20074202_armel.modfied.deb

Now connect your device to the power supply (running out of battery during the short flashing process could be problematic), then run:

fiasco-flasher -f -k /usr/share/osso/images/zImage-diablo-200823

Reboot, make sure Advanced Backlight is enabled (Control panel -> Panels -> Status bar) and rotate using the selection in Advanced Backlight from your status bar.