Editing SMSCON
Warning: You are not logged in.
Your IP address will be recorded in this page's edit history.
Warning: This page is 74 kilobytes long; some browsers may have problems editing pages approaching or longer than 32kb. Please consider breaking the page into smaller sections.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 75: | Line 75: | ||
* Autoloads at boot. This ensures that SMSCON is active (that means is listening for commands) even after device (re)boot. Autoload is enabled by default during installation of a SMSCON package. | * Autoloads at boot. This ensures that SMSCON is active (that means is listening for commands) even after device (re)boot. Autoload is enabled by default during installation of a SMSCON package. | ||
- | * Create and keep a log file on the device. The log file can be queried remotely by SMS command as well as locally via command line | + | * Create and keep a log file on the device. The log file can be queried remotely by SMS command as well as locally via command line. |
* Reboot the phone. Albeit this is possible it is not generally recommended if your SIM card has a PIN: If nobody enters the PIN correctly, the phone would boot but could not connect to GPRS network. | * Reboot the phone. Albeit this is possible it is not generally recommended if your SIM card has a PIN: If nobody enters the PIN correctly, the phone would boot but could not connect to GPRS network. | ||
* Shutdown the phone. Also just possible but not generally recommended. | * Shutdown the phone. Also just possible but not generally recommended. |
Learn more about Contributing to the wiki.