Talk:Updating the firmware

(Flashing order)
(Flashing order)
Line 23: Line 23:
-
I undid the changes done to the page. [http://tablets-dev.nokia.com/nokia_N900.php] clearly states that "NOTE: Always flash the FIASCO image first, then the eMMC image immediately after that. Never boot up the device between flashing the FIASCO image and the eMMC image!".
+
I undid the changes done to the page. [http://tablets-dev.nokia.com/nokia_N900.php tablets-dev.nokia.com restricted downloads] clearly states that "NOTE: Always flash the FIASCO image first, then the eMMC image immediately after that. Never boot up the device between flashing the FIASCO image and the eMMC image!".
-
I hope that no one would edit this page and reverse the order, as it's causing enough confusion already. --[[User:mohammad7410|mohammad7410]] 12:15, 30 June 2010 (UTC)
+
I hope that no one would edit this page and reverse the order, as it's causing enough confusion already. --[[User:mohammad7410|mohammad7410]] 12:16, 30 June 2010 (UTC)
== Notes by henkka ==
== Notes by henkka ==

Revision as of 12:16, 30 June 2010

a great point from Bijiont @ t.m.o: speaking of wiki, I am surprised the flashing instructions for each OS aren't a little more clear.

For example I don't see the "u" key mentioned on any of the OS instructions.

I know what some are saying "Then update it. . . it's a wiki anyone can do it". I would but I don't have a N900 nor first hand experience flashing only what I have read here at Maemo.org

Something which may be helpful would be to break down per device how to flash. I know this may sound "low tech" but maybe even include images for people who don't have a tech background.

I know I know, "Are you some kind of moron"? No I actually do a ton of programming so this isn't a request or suggestion from a low tech person but someone who almost spends more time commenting code than the actual code itself.

Code is only as good as the comments that tell you what a nest does.

--ossipena 08:37, 4 December 2009 (UTC)

Flashing order

Marcell edited page by adding: "(Warning for eMMC flashing order added. Will be very important for PR1.2 onwards)"

I´m just bit confused because if you read emmc section you notice that in the end is says: "Having flashed the eMMC, you should now flash the firmware of your device. " And it doesn't make sense after first saying that you should first flash rootfs.


I undid the changes done to the page. tablets-dev.nokia.com restricted downloads clearly states that "NOTE: Always flash the FIASCO image first, then the eMMC image immediately after that. Never boot up the device between flashing the FIASCO image and the eMMC image!". I hope that no one would edit this page and reverse the order, as it's causing enough confusion already. --mohammad7410 12:16, 30 June 2010 (UTC)

Notes by henkka

Couple of notes after flashing vanilla + emmc. Maybe these should be mentioned in wiki.

- After flashing vanilla system reboots and asks pin code (not mentioned in wiki) --> Is emmc flashing mandatory or just recommended after flashing vanilla?

- I couldn't flash emmc with given guide. Have to go with u-key and connect usb cable as in vanilla guide.