Editing User talk:Tomj

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

This is very much a work in progress, not finished. I don't think following the instructions exactly will break anything, but going off-piste can quite easily.

= Repartioning n900 for directory Easy Debian on entirely on device=

Software I needed installed on the device: Kernel Power 52, CSSU-thumb, rootsh, a text editor (I like TxPad), Easy Debian (I use Estel's image assumed initially to be installed on MyDocs).

Unless otherwise specified, all commands is entered in maemo's terminal as root. When modifying <code>filename</code>, I tend to make 2 copies, <code>filename.old</code> and <code>filename.new</code>, edit <code>filename.new</code> and, when I'm happy with it, copy it over <code>filename</code>. This may be overkill, but it makes me happy...

== Prepare backup ==

<ol>
<li>Put 32GB card without any data you care about into your device and unmount it, as root entering <code>umount /media/mmc1/</code></li>

<li>Start by using cfdisk to format the SD; it's easier than calculaing needed for sfdisk.  I velieve there a version in Extras-devel, but why bother with that when there's one in Easy Debian. In the Easy Debian chroot shell, type <code>cfdisk mmcblk1</code></li>

<li>If you can't see the filetable, quit cfdisk, shrink the terminal font size using the volume keys and fire it up again</li>

<li>Use cfdisk to set up 2 partitions. I created a small one at the start of the available space to reserve the name mmcblk1p1, then a 5120MB one at the end, then deleted the one at the beginning and recreated it using all the remaining available space. Make sure you remember to write the new patritions, then quit cfdisk and unmount Easy Debian using the icon.</li>

<li>In maemo's xterm as root, format your partitions, then mount them
<pre>mkfs.vfat /dev/mmcblk1/p1
mkfs.ext4 /dev/mmcblk1p2
mount /dev/mmcblk1p1 /media/mmc1
mount -t ext4 /dev/mmcblk1p2 /mnt</pre>
</li>

<li>Mount the Easy Debian image file: <code>mount -o loop /home/user/MyDocs/debian-m5-estel.img.ext3 /.debian</code></li>

<li>Copy the Easy Debian image to a directory in the second partition on the SD: <pre>mkdir /mnt/debian
cp -a /.debian/* /mnt/debian</pre></li>

<li>Unmount the Easy Debian image: <code>umount /.debian</code></li>

<li>Modify /home/user/.chroot, to make it point to new location, in the relevant position: 
<pre>IMGFILE=none
CHROOT=/mnt/debian</pre></li>

<li>Edit /sbin/closechroot changing the line 
<pre>#Abort if chroot not mounted
if [ ! -f "$CHROOT/var/lock/qmount-complete" ] ; then</pre>
to
<pre>#Abort if chroot not mounted
if [ "$IMGFILE" != "none" ] && [ ! -f "$CHROOT/var/lock/qmount-complete" ] ; then</pre>
</li>

<li>Check whether Easy Debian works, then unmount it with the icon.</li>

<li>If you want, delete the Easy Debian image file: <code>rm /home/user/MyDocs/debian-m5-estel.img.ext3</code></li>

<li>Backup MyDocs to mmc1: <code>cp -a /home/user/MyDocs /media/mmc1</code></li>

<li>Unmount MyDocs: <code>umount /home/user/MyDocs/</code></li>

<li>Backup /home to the second partition on the SD: <code>cp -a /home/* /mnt</code></li>
</ol>

== Repartition time ==
I took the gist of this from [[Repartitioning_the_flash]], but at some point CSSU in the thumb and/or testing branches changed it's startup and no longer uses /usr/lib/genfstab.awk. This is based on the latest thumb CSSU, so if you are using a setup from before this change, things may be different.

<ol>
<li>Create a file /etc/default/mount-opts-overwrite containing the line <code>genfstab="0"</code></li>

<li>Edit /etc/fstab, changing the line <pre>/dev/mmcblk0p2 /home ext3 defaults 0 2</pre> to <pre>/dev/mmcblk1p2 /home ext4 defaults 0 0</pre></li>

<li><code>reboot</code> If you've done something wrong, this is where it all comes tumbling down with an infinite reboot loop.</li>

<li>Assuming you've booted successfully, you may as well unmount MyDocs; I'm not sure if it's necessary, but why not? <code>umount /home/user/MyDocs</code></li>

<li>Get Easy Debian pointing in the right direction by editing /home/user/.chroot to change the line <code>CHROOT=/mnt/debian</code> to <code>CHROOT=/home/debian</code></li>

<li>In Easy Debian chroot shell, type <code>cfdisk /dev/mmcblk0</code></li>

<li>There is some unformatted memory at the start of the eMMC; I don't know if it's important, but to preserve it, I started by making a new partiton of it, to be deleted before writing the new setup. I then set up a 25923.23MB <code>mmcblk0p1</code> setting type to 0C (FAT32 (LBA)) for MyDocs and a 5219.49MB <code>mmcblk0p2</code> for home. I then deleted the <code>mmcblk0p4</code> I'd set up to protect the unformatted space at the start and select Write to repartition the eMMC. You may, of course, chose partition sizes to suit yourself. When done, unmount with the Close Debian icon.</li>

<li>Part of my aim was to have home as ext4, so back in the maemo root shell: <code>mkfs.ext4 /dev/mmcblk0p2</code></li>
</ol>

== Restoring the system to eMMC ==
<ol>
<li>Mount the future /home. <code>mount /dev/mmcblk0p2 /mnt</code></li>

<li>Restore your home backup: <code>cp -a /home/* /mnt</code></li>

<li>Unmount /home to be <code>umount /mnt</code></li>

<li>Mount MyDocs to be: <code>mount /dev/mmcblk0p1 /mnt</code></li>

<li>Restore MyDocs: <code>cp -a /media/mmc1/* /mnt</code></li>

<li>If, like me, you've gone for an ext4 home, edit line 98 of /etc/event.d/rcS-late, changing <code>ext3</code> to <code>ext4</code></li>

<li>Delete the file stopping maemo for looking for eMMC partitions: <code>rm /etc/default/mount-opts-overwrite</code></li>
<li>Cross your fingers and <code>reboot</code></li>
</ol>

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/User_talk:Tomj"

Personal tools

Navigation

Views

Editing User talk:Tomj

@@ Line 15: / Line 15: @@
 <li>Start by using cfdisk to format the SD; it's easier than calculaing needed for sfdisk.  I velieve there a version in Extras-devel, but why bother with that when there's one in Easy Debian. In the Easy Debian chroot shell, type <code>cfdisk mmcblk1</code></li>
-<li>If you can't see the filetable, quit cfdisk, tap the fullscreen icon in the bottom of the xterm window and/or shrink the terminal font size using the volume keys and fire cfdisk up again.</li>
+<li>If you can't see the filetable, quit cfdisk, shrink the terminal font size using the volume keys and fire it up again</li>
 <li>Use cfdisk to set up 2 partitions. I created a small one at the start of the available space to reserve the name mmcblk1p1, then a 5120MB one at the end, then deleted the one at the beginning and recreated it using all the remaining available space. Make sure you remember to write the new patritions, then quit cfdisk and unmount Easy Debian using the icon.</li>