R&D mode
m (flasher link) |
mohammad7410 (Talk | contribs) (→R&D mode flags) |
||
| Line 20: | Line 20: | ||
*<code>no-retu-wd</code> - Disables the watchdog on retu. | *<code>no-retu-wd</code> - Disables the watchdog on retu. | ||
*<code>no-usb-timeout</code> - Unknown | *<code>no-usb-timeout</code> - Unknown | ||
| + | *<code>no-charging</code> - Disables charging via USB. BME will still running in background. | ||
[[Category:Power users]] | [[Category:Power users]] | ||
Revision as of 11:46, 6 May 2010
You can enable R&D mode by passing the --enable-rd-mode flag to the flasher.
You must use a Linux or a Mac OS X computer to enable R&D Mode, as the Windows update wizard will not allow you to enable/disable R&D Mode. Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already enabled.
What R&D mode does
sudo gainrootin the console can be used, without installing anything extra, to gain a root shell.
- The power button turns on the tablet with a shortpress press as opposed to the longpress normally required.
- N900: The keyboard backlight behind the left and right side of the keyboard flickers in response to system activity.
R&D mode flags
You can enable some R&D mode flags (flasher-3.0 --set-rd-flags=<flag>) for various features:
no-lifeguard-reset- Disables the lifeguard process (lifeguard reboots the device when an important system process crashes).serial-console- Enables the serial console (the serial port pins are next to the battery) and causes a shorter battery life.no-omap-wd- Disables the watchdog on the OMAP processor.no-retu-wd- Disables the watchdog on retu.no-usb-timeout- Unknownno-charging- Disables charging via USB. BME will still running in background.