Updating the firmware
(→Flashing the Nokia N810) |
(→Troubleshooting) |
||
| Line 63: | Line 63: | ||
* If you get a "Permission denied" error then chmod +x flasher-2.0 or chmod +x flasher-3.0 to make the flasher tool executable. You may also need root permissions, run command with sudo or su to root. | * If you get a "Permission denied" error then chmod +x flasher-2.0 or chmod +x flasher-3.0 to make the flasher tool executable. You may also need root permissions, run command with sudo or su to root. | ||
* It may help, if you connect the 770 or the N800 directly to your computer by USB, instead of a USB hub. Also, avoid the USB ports on laptop docking stations. | * It may help, if you connect the 770 or the N800 directly to your computer by USB, instead of a USB hub. Also, avoid the USB ports on laptop docking stations. | ||
| - | * If you need to flash your Nokia 770 with an image from 2005 then use the older flasher called "flasher" with no number in the name | + | * If you need to flash your Nokia 770 with an image from 2005 then use the [http://tablets-dev.nokia.com/d3.php older flasher] called "flasher" with no number in the name |
* On some distributions the usb filesystem is not loaded mount -t usbfs usbfs /proc/bus/usb | * On some distributions the usb filesystem is not loaded mount -t usbfs usbfs /proc/bus/usb | ||
* (From mailing list): If you are running a newer kernel and you get "Suitable USB device not found, waiting" but nothing happens when you switch on the 770 as instructed above, try to patch the flasher: perl -pi -e 's-/proc/bus/usb-/dev/bus/usb\000-;' -i.backup, where `` is the location of your flasher 2.0 linux binary. This applies also for flasher-3.0 (tested with Debian 4.0 and an N800). | * (From mailing list): If you are running a newer kernel and you get "Suitable USB device not found, waiting" but nothing happens when you switch on the 770 as instructed above, try to patch the flasher: perl -pi -e 's-/proc/bus/usb-/dev/bus/usb\000-;' -i.backup, where `` is the location of your flasher 2.0 linux binary. This applies also for flasher-3.0 (tested with Debian 4.0 and an N800). | ||
[[Category:HowTos]] | [[Category:HowTos]] | ||
Revision as of 04:20, 27 May 2008
Contents |
Before flashing
Beware that flashing a new image on the Nokia 770, on the Nokia N800 or N810 will remove all user changes to the system, including preferences, bookmarks, news feeds, user installed applications... Everything not on the memory card will be gone and the device will behave as if just purchased with the single exception that any previously-set lock code will be kept and not reset to the factory-default of "12345" (even the code is not preserved on some images).
Note that Nokia's Backup tool only backs up stuff like bookmarks and documents inside /home/user/MyDocs -- It will probably be worthwhile experimenting a bit with the backup/restore utility before flashing :-)
Flashing the Nokia 770
If you want to update to the latest Nokia image, follow the steps below:
- PC: Download the Linux flasher (2.0 or 3.0 which also works) at and make it executable if necessary (see below : Troubleshooting)
- PC: In the same directory download the image you want:
- 5.2006.13-7 OS 2005 Edition version 5.2006.13-7 from tablets-dev.nokia.com
- 3.2006.49-2 OS 2006 Edition version 3.2006.49-2 from tablets-dev.nokia.com
Make sure the battery of your 770 is fully charged.
- 770: Unplug charger and switch off the Nokia 770. Connect it to your computer via USB without turning it on
- PC: Execute as root (or as a normal user with rights to use the USB port):
./flasher-2.0 -F SU-18_2006SE_3.2006.49-2_PR_F5_MR0_ARM.bin -f -R
- PC: "Suitable USB device not found, waiting" is displayed on the console
- 770: Now plug in the charger to switch on the 770 or switch it on using the power button WHILE holding the Home-button
- PC: Watch the messages as the image loads to the 770 after which it reboots automatically -- you're done now!
If you need additional detailed information on flashing the 770, then please see
Flashing the Nokia N800
If you want to reflash your Nokia N800, follow the steps below:
- PC: Download the Linux flasher-3.0
- PC: In the same directory download the firmware image:
- IT OS Software Edition 2008 (version 2.2007.51-3) from tablets-dev.nokia.com
- IT OS -- List of firmware images, in case the above is not the latest Image.
- Make sure the battery of your N800 is fully charged.
- N800: Unplug charger and switch off the Nokia N800. Connect the tablet to your computer via USB
- PC: Execute as root (or as a normal user with rights to use the USB port):
./flasher-3.0 -F RX-34_2008SE_2.2007.51-3_PR_COMBINED_MR0_ARM.bin -f -R
- PC: "Suitable USB device not found, waiting" is displayed on the console
- N800: Now plug in the charger to switch on the N800 or switch it on using the power button WHILE holding the Home-button
- PC: Watch the messages as the image loads to the N800 after which it reboots automatically -- you're done now!
Flashing the Nokia N810
If you want to reflash your brand new Nokia N810, follow the steps below:
- PC: Download the Linux flasher-3.0
- PC: In the same directory download the latest firmware image:
- OS 2008 Software Edition from tablets-dev.nokia.com
- Make sure the battery of your N810 is fully charged.
- N810: Unplug charger and switch off the Nokia N810. Connect the tablet to your computer via USB without turning it on
- PC: Execute as root (or as a normal user with rights to use the USB port):
./flasher-3.0 -F RX-44_2008SE_1.2007.42-18_PR_COMBINED_MR0_ARM.bin -f -R
- PC: "Suitable USB device not found, waiting" is displayed on the console
- N810: Now plug in the charger to switch on the N810 or switch it on using the power button WHILE holding the Home-button
- PC: Watch the messages as the image loads to the N810 after which it reboots automatically -- you're done now!
Troubleshooting
- If you get a "Permission denied" error then chmod +x flasher-2.0 or chmod +x flasher-3.0 to make the flasher tool executable. You may also need root permissions, run command with sudo or su to root.
- It may help, if you connect the 770 or the N800 directly to your computer by USB, instead of a USB hub. Also, avoid the USB ports on laptop docking stations.
- If you need to flash your Nokia 770 with an image from 2005 then use the older flasher called "flasher" with no number in the name
- On some distributions the usb filesystem is not loaded mount -t usbfs usbfs /proc/bus/usb
- (From mailing list): If you are running a newer kernel and you get "Suitable USB device not found, waiting" but nothing happens when you switch on the 770 as instructed above, try to patch the flasher: perl -pi -e 's-/proc/bus/usb-/dev/bus/usb\000-;' -i.backup, where `` is the location of your flasher 2.0 linux binary. This applies also for flasher-3.0 (tested with Debian 4.0 and an N800).