N900 Hardware Bus I2c
(→Hardware) |
|||
| Line 16: | Line 16: | ||
* 0x6B [[N900 Hardware Battery Charger]] | * 0x6B [[N900 Hardware Battery Charger]] | ||
| - | + | * 0x10 [[N900 Hardware VGA Camera|VGA Camera (control)]] | |
==Bus 3== | ==Bus 3== | ||
| - | * 0x0c [[N900 Hardware Autofocus|Lens focus | + | * 0x0c [[N900 Hardware Autofocus|Lens focus ]] |
* 0x1d [[N900 Hardware Accelerometer|Accelerometer]] | * 0x1d [[N900 Hardware Accelerometer|Accelerometer]] | ||
* 0x3e [[N900 Hardware Camera Sensor|Front Camera (control)]] | * 0x3e [[N900 Hardware Camera Sensor|Front Camera (control)]] | ||
Revision as of 17:23, 7 June 2010
I2C is a simple serial bus, used in many devices.
Contents |
Hardware
Bus 1
- 0x48 0x49 0x4a 0x4b Gaia/chipset
Bus 2
- 0x18 0x19 Audio codec
- 0x29 N900 Hardware Light Meter
- 0x30 N900 Hardware Flash Torch
- 0x32 N900 Hardware LED
- 0x60 N900 Headphone Amplifier
- 0x63 FM receiver
- 0x55 N900 Hardware Charge Meter
- 0x6B N900 Hardware Battery Charger
- 0x10 VGA Camera (control)
Bus 3
- 0x0c Lens focus
- 0x1d Accelerometer
- 0x3e Front Camera (control)
Software
The n900 software driving I2C comes in three flavours.
Firstly, there are a large number of kernel drivers.
Then, there are a small number of devices 'bit banged' through I2C ioctls - BME for example does this.
Finally, there are probably some I2C components in the Rapuyama and assorted cellphone/GPS hardware. These are not visible to the casual developer. (you have to open the n900 and probe stuff, or hack the phone firmware).