Bluetooth PAN
chainsawbike (Talk | contribs) (added internet connection sharing for n900) |
chainsawbike (Talk | contribs) |
||
Line 25: | Line 25: | ||
Using udev to automatically setup internet connection sharing over bluetooth | Using udev to automatically setup internet connection sharing over bluetooth | ||
- | A kernel with iptables support is needed, CSSU has a suitable kernel by default stock fremantle does not | + | |
+ | A kernel with iptables support is needed, CSSU has a suitable kernel by default but stock fremantle does not | ||
Install the ''iptables'' package: | Install the ''iptables'' package: |
Revision as of 03:44, 26 March 2014
This allows you to use your Maemo device to use Bluetooth PAN to connect via another device to another network such as the Internet.
The Connection manager is used for this purpose, exactly the same way as you connect to a WLAN network or to a cell phone dial-up connection (Bluetooth DUN). Most Windows Smartphones use this method of connection when used as a modem via Bluetooth.
If you have Nokia N900 you may instead use it as PAN server to allow an other device such as a Nokia N8x0 to utilize Bluetooth PAN.
Installing
For the Nokia N900 pan is disabled by default. To enable it, edit /etc/bluetooth/main.conf and remove network from the disabled plugins
[General] # List of plugins that should not be loaded on bluetoothd startup DisablePlugins =network,input,hal
libicd-network-null is also recommended for using internet over bluetooth
apt-get install libicd-network-null
For other devices you need to install maemo-pan through the Application manager. You may need to restart your tablet after installation in order to force a dependency on maemo-pan (libicd-network-dummy package) being loaded.
Tap on the Connectivity icon in your status bar and either "Select a connection" or "Change connection" to see a list of available network access points. You should see one called "Dummy Network" (this name will likely change in future versions of maemo-pan, see bug #3306 for details).
To connect to the Internet through this connection you must make sure the "Internet Connection Sharing" application is running on your phone and has a connection. Select the "Dummy Network" from the tablet network list and enjoy anywhere Internet!
Sharing your connection over bluetooth [n900][WIP]
Using udev to automatically setup internet connection sharing over bluetooth
A kernel with iptables support is needed, CSSU has a suitable kernel by default but stock fremantle does not
Install the iptables package:
apt-get install iptables
create the following 2 files:
/etc/udev/rules.d/98-bnep0.rules:
ACTION=="add", SUBSYSTEM=="net", KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh" ACTION=="remove", SUBSYSTEM=="net", KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"
/etc/udev/bluenet.sh:
#! /bin/sh if [ $ACTION = "add" ]; then echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING ! -o lo -j MASQUERADE ifconfig bnep0 192.168.3.1 ifconfig bnep0 up /usr/sbin/dnsmasq -I lo -z -a 192.168.3.1 -F 192.168.3.64,192.168.3.127 -x /var/run/dnsmasq.pid.bnep0 else iptables -t nat -D POSTROUTING ! -o lo -j MASQUERADE if [ -f /var/run/dnsmasq.pid.bnep0 ]; then DNSMASQ_PID=`cat /var/run/dnsmasq.pid.bnep0` rm -f /var/run/dnsmasq.pid.bnep0 kill $DNSMASQ_PID fi fi
then set /etc/udev/bluenet.sh as executible:
chmod +x /etc/udev/bluenet.sh
now whenever an authorised remote device makes a bluetooth pan (nap) connection iptables and dnsmasq are setup to allow that device access to the phones network TODO: when no internet connection is active ask to set it up
Using PAN on older releases
It is possible to use PAN to share Internet connections via PAN between two Nokia devices. However, on older devices it is recommended to use Bluetooth DUN (dial-up networking), since this is the normal method which smartphones use to share Internet access over Bluetooth.