R&D mode
m |
m |
||
| Line 6: | Line 6: | ||
Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already on. | Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already on. | ||
| - | + | == What R&D Mode does == | |
*"sudo gainroot" in the console can be used, without installing anything extra, to gain a root shell. | *"sudo gainroot" in the console can be used, without installing anything extra, to gain a root shell. | ||
| Line 12: | Line 12: | ||
*The power button turns on the tablet with one press, as opposed to the usual behavior where you have to hold the power button for the tablet to power up. | *The power button turns on the tablet with one press, as opposed to the usual behavior where you have to hold the power button for the tablet to power up. | ||
| - | + | == R&D Mode flags == | |
You can enable some R&D mode flags (flasher-3.0 --set-rd-flags=<flag>) for various features: | You can enable some R&D mode flags (flasher-3.0 --set-rd-flags=<flag>) for various features: | ||
Revision as of 16:13, 14 January 2009
 |
This is an article from the old midgard wiki that hasn't yet been fully updated for this wiki, please update it. Please see the talk page for discussion. |
 |
You can enable the R&D mode by passing the "--enable-rd-mode" flag to flasher-3.0.
You must use a Linux or a Mac OS X computer to enable R&D Mode - the Windows update wizard will not allow you to enable/disable R&D Mode. Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already on.
What R&D Mode does
- "sudo gainroot" in the console can be used, without installing anything extra, to gain a root shell.
- The power button turns on the tablet with one press, as opposed to the usual behavior where you have to hold the power button for the tablet to power up.
R&D Mode flags
You can enable some R&D mode flags (flasher-3.0 --set-rd-flags=<flag>) for various features:
- "no-lifeguard-reset" - disables the lifeguard process (lifeguard reboots the device when an important system process crashes)
- "serial-console" - enables the serial console (the serial port pins are next to the battery) and causes a shorter battery life.
- "no-omap-wd" - disables the watchdog on the OMAP processor.
- "no-retu-wd" - disables the watchdog on retu.
- "no-usb-timeout" ???