PEAP+MSCHAPv2 WiFi authentication setup
(→Known working networks) |
|||
| Line 29: | Line 29: | ||
== Known working networks == | == Known working networks == | ||
| + | * eduroam at TU Delft, Netherlands | ||
* eduroam in Tampere, Finland | * eduroam in Tampere, Finland | ||
* LANGATON-WPA in Tampere, Finland | * LANGATON-WPA in Tampere, Finland | ||
Revision as of 12:51, 30 November 2009
PEAP + MSCHAPv2 WiFi Authentication Setup
Some educational sites using eduroam support this method, some use EAP-TTLS+PAP which does not work. PEAP + MSCHAPv2 is quite popular authentication method which is supported by the tablets, but some setup is needed. Therefore, bad out of the box experience is guaranteed. If you're uncertain, try if step-by-step guide below works. If it doesn't - bummer.
(This example is for Eduroam for N900. Same works for 770, N800 and N810 too)
Go Applications -> Settings -> Internet connections [Connections] [New] [Next] Connection name: eduroam [Next] Scan .. Wi-Fi .. [Yes] EAP type: PEAP [Next] EAP method: EAP MSCHAPv2 [Next] User name: (username@domain) password: (your password) [Next] [Advanced] [EAP] Use manual user name: [x] Manual user name: (username@domain) [Save] [Finnish]
Known working networks
- eduroam at TU Delft, Netherlands
- eduroam in Tampere, Finland
- LANGATON-WPA in Tampere, Finland