OpenSuse Build Service/Installation

Revision as of 17:27, 2 May 2010

1 Maemo OBS Cluster Installation Notes

Maemo OBS Cluster Installation Notes

Introduction

Maemo OBS Clusters are divided into 3 instances:

Frontend – Containing Webclient, OBS API, Mysql server
Backend/Repository Server – Where OBS-Server, dispatcher, scheduler and repository server are installed
Workers – Installation of obs-worker package

This Installation Notes covers OBS installation and setup for version 1.7. You can always refer to latest documentation also available on-line: http://gitorious.org/opensuse/build-service/blobs/raw/master/dist/README.SETUP

Creating Xen VMs

Based on http://en.opensuse.org/Build_Service/KIWI/Cookbook

zypper ar http://download.opensuse.org/repositories/Virtualization:/Appliances/openSUSE_11.2/ Virtualization:Appliances
zypper refresh
zypper in kiwi kiwi-templates kiwi-desc-xenboot squashfs

Create some xen volumes

lvcreate -L 10G VG_data -n fe_root
lvcreate -L 2G  VG_data -n fe_swap
mkswap /dev/VG_data/fe_swap
 
lvcreate -L 10G VG_data -n be_root
lvcreate -L 2G  VG_data -n be_swap
mkswap /dev/VG_data/be_swap
 
lvcreate -L 10G VG_data -n w1_root
lvcreate -L 2G  VG_data -n w1_swap
mkswap /dev/VG_data/w1_swap

Prpeare an opensuse minimal image:

mkdir /data/11.2min
kiwi --prepare suse-11.2-JeOS --root /data/11.2min/image-root --add-profile xenFlavour --add-package less --add-package iputils

Update the config & modules:

cp -a /lib/modules/2.6.31.12-0.2-xen /data/11.2min/image-root/lib/modules/
 
echo default 10.1.1.1 > /data/11.2min/image-root/etc/sysconfig/network/routes
echo NETCONFIG_DNS_POLICY=\"\" >> /data/11.2min/image-root/etc/sysconfig/network/config
echo nameserver 8.8.8.8 > /data/11.2min/image-root/etc/resolv.conf
echo default 10.1.1.1 > /data/11.2min/image-root/etc/sysconfig/network/routes
cat << EOF >/data/11.2min/image-root/etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='static'
BROADCAST=''
STARTMODE='onboot'
EOF

Copy to each of the VM root disks

mkfs -text3 /dev/VG_data/fe_root
mount /dev/VG_data/fe_root /mnt/lvm
rsync -HAXa /data/11.2min/image-root/ /mnt/lvm/
echo fe.obs.maemo.org > /mnt/lvm/etc/HOSTNAME
echo "IPADDR='10.1.1.10/24'" >> /mnt/lvm/etc/sysconfig/network/ifcfg-eth0
umount /mnt/lvm
 
mkfs -text3 /dev/VG_data/be_root
mount /dev/VG_data/be_root /mnt/lvm
rsync -HAXa /data/11.2min/image-root/ /mnt/lvm/
echo be.obs.maemo.org > /mnt/lvm/etc/HOSTNAME
echo "IPADDR='10.1.1.11/24'" >> /mnt/lvm/etc/sysconfig/network/ifcfg-eth0
umount /mnt/lvm
 
mkfs -text3 /dev/VG_data/w1_root
mount /dev/VG_data/w1_root /mnt/lvm
rsync -HAXa /data/11.2min/image-root/ /mnt/lvm/
echo w1.obs.maemo.org > /mnt/lvm/etc/HOSTNAME
echo "IPADDR='10.1.1.51/24'" >> /mnt/lvm/etc/sysconfig/network/ifcfg-eth0
umount /mnt/lvm

Configure some Xen VM configs

name='fe'
disk=['phy:/dev/VG_data/fe_root,xvda2,w', 'phy:/dev/VG_data/fe_swap,xvda1,w']
vif=['mac=0D:16:3E:40:B5:FE']
memory='1024'
 
root='/dev/xvda2 ro'
kernel='/boot/vmlinuz-2.6.31.12-0.2-xen'
ramdisk='/boot/initrd-2.6.31.12-0.2-xen'
extra='clocksource=jiffies console=hvc0 xencons=tty'
 
on_poweroff='destroy'
on_reboot='restart'
on_crash='restart'

And start them:

xm create /etc/xen/fe.cfg
xm create /etc/xen/be.cfg
xm create /etc/xen/w1.cfg

Networking Overview

10.1.1.1        host.obs.maemo.org
10.1.1.10       fe.obs.maemo.org build.obs.maemo.org api.obs.maemo.org
10.1.1.11       be.obs.maemo.org src.obs.maemo.org repo.obs.maemo.org
10.1.1.51       w1.obs.maemo.org
10.1.1.52       w2.obs.maemo.org
10.1.1.53       w3.obs.maemo.org
10.1.1.54       w4.obs.maemo.org
10.1.1.55       w5.obs.maemo.org
10.1.1.56       w6.obs.maemo.org
10.1.1.57       w7.obs.maemo.org
10.1.1.58       w8.obs.maemo.org
10.1.1.59       w9.obs.maemo.org
10.1.1.60       w10.obs.maemo.org
10.1.1.61       w11.obs.maemo.org
10.1.1.62       w12.obs.maemo.org
10.1.1.63       w13.obs.maemo.org
10.1.1.64       w14.obs.maemo.org
10.1.1.65       w15.obs.maemo.org
10.1.1.66       w16.obs.maemo.org
10.1.1.67       w17.obs.maemo.org
10.1.1.68       w18.obs.maemo.org
10.1.1.69       w19.obs.maemo.org

Interim config

zypper in wget less iputils

Installing the Frontend (WebUI and API)

Start with a minimal Suse install and then add Tools repository where OBS 1.7 is available.

cd /etc/zypp/repos.d/;
wget http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_11.2/openSUSE:Tools.repo
zypper ref
# Accept the trust key

Install obs-api (It's going to install lighttpd webserver by dependency for you).

zypper in obs-api memcached

Setup Mysql

Mysql server needs to be installed and configured to start as deamon

chkconfig --add mysql
rcmysql start

Setup a secure installation, if it's the first time starting mysql

/usr/bin/mysql_secure_installation

The frontend instance holds 2 applications, the api and the webui. Each one need a database created

mysql -u root -p
mysql> create database api_production;
mysql> create database webui_production;

Add obs user to handle these databases

GRANT all privileges
      ON api_production.* 
      TO 'obs'@'%', 'obs'@'localhost' IDENTIFIED BY '************';
GRANT all privileges
      ON webui_production.* 
      TO 'obs'@'%', 'obs'@'localhost' IDENTIFIED BY '************';
FLUSH PRIVILEGES;

Configure your MySQL user and password in the "production:" section of the api config:

vi /srv/www/obs/api/config/database.yml
#change the production section
production:
  adapter: mysql
  database: api_production
  username: obs
  password: ************

Do the same for the webui. It's configured, by default to use sqlite, but since we're configuring the cluster for production environment, let's bind it to mysql:

vi /srv/www/obs/webui/config/database.yml
#change the production section
production:
  adapter: mysql
  database: webui_production
  username: obs
  password: ************

Populate the database

cd /srv/www/obs/api/
RAILS_ENV="production" rake db:migrate
 
cd /srv/www/obs/webui/
RAILS_ENV="production" rake db:migrate

You can check the migration was successful verifying the “migrated” message at the end of each statement.

Setup and configure lighttpd for the api and webui

You need to setup the correct hostnames to where webui, api and repo server are going to point to

vi /etc/lighttpd/vhosts.d/obs.conf
$HTTP["host"] =~ "build" {
  rails_app   = "webui"
  rails_root  = "/srv/www/obs/webui"
  rails_procs = 5
  # production/development are typical values here
  rails_mode  = "production"
 
  log_root = "/srv/www/obs/webui/log"
 
  include "vhosts.d/rails.inc"
}
$HTTP["host"] =~ "api" {
  rails_app   = "api"
  rails_root  = "/srv/www/obs/api"
  rails_procs = 5
  # production/development are typical values here
  rails_mode  = "production"
 
  log_root = "/srv/www/obs/api/log"
 
  include "vhosts.d/rails.inc"
}
<$HTTP["host"] =~ "download" {
  server.name = "download.obs.maemo.org"
 
  server.document-root = "/srv/obs/repos/"
}
/source>
 
To enable these vhosts, make sure to '''uncomment''' the following in the 'custom includes' section at the bottom of /etc/lighttpd/lighttpd.conf:
<source lang='bash'>
vi /etc/lighttpd/lighttpd.conf
##
  ## custom includes like vhosts.
  ##
  #include "conf.d/config.conf"
  # following line uncommented as per
  # /usr/share/doc/packages/obs-api/README.SETUP
  include_shell "cat vhosts.d/*.conf"

Also, the modules "mod_magnet", "mod_rewrite" and fastcgi need to be enabled by uncommenting the corresponding lines in /etc/lighttpd/modules.conf:

vi /etc/lighttpd/modules.conf
    server.modules = (
      "mod_access",
    #  "mod_alias",
    #  "mod_auth",
    #  "mod_evasive",
    #  "mod_redirect",
      "mod_rewrite",
    #  "mod_setenv",
    #  "mod_usertrack",
    )
 
    ##
    ## mod_magnet
    ##
    include "conf.d/magnet.conf"
 
    ##
    ## FastCGI (mod_fastcgi)
    ##
    include "conf.d/fastcgi.conf"

You need also to configure /srv/www/obs/webui/config/environments/production.rb to point to correct server names:

vi /srv/www/obs/webui/config/environments/production.rb
FRONTEND_HOST = "api.obs.maemo.org"
FRONTEND_PORT = 80
EXTERNAL_FRONTEND_HOST = "api.obs.maemo.org"
BUGZILLA_HOST = "http://bugs.maemo.org/"
DOWNLOAD_URL = "http://downloads.obs.maemo.org"

Do the same for /srv/www/obs/api/config/environments/production.rb. As soon your backend is not on the same machine as the api (frontend), change the following:

vi /srv/www/obs/api/config/environments/production.rb
SOURCE_HOST = "src.obs.maemo.org"
SOURCE_PORT = 5352

Make sure TCP port 5352 is open on the firewall. Ensure lighttpd and obs ui helpers start:

chkconfig --add memcached
chkconfig --add lighttpd
chkconfig --add obsapidelayed
chkconfig --add obswebuidelayed
 
rcmemcached start
rclighttpd start
rcobsapidelayed start
rcobswebuidelayed start

ligthttpd user and group need to be the onwer of api and webui dirs (as well as log and tmp):

chown -R lighttpd.lighttpd /srv/www/obs/{api,webui}

Installing the Backend

On this host we need also to setup openSuse Tools repository:

cd /etc/zypp/repos.d/;
wget http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_11.2/openSUSE:Tools.repo
zypper ref
# Accept the trust key

Install:

zypper in obs-server obs-signer obs-utils
# obs-server brings these other packages as dependency. This is just for you to notice which packages are needed for Backend installation

Configure Scheduler architectures

vi /etc/sysconfig/obs-server
OBS_SCHEDULER_ARCHITECTURES="i586 armv5el armv7el“

/usr/lib/obs/server/BSConfig.pm needs to point to correct server names corresponding to source server, where workers are going to download the source, and the repository server, where RPM repos are going to be shered to users.

vi /usr/lib/obs/server/BSConfig.pm
#add
$hostname="be.obs.maemo.org";
 
our $srcserver = "http://src.obs.maemo.org:5352";
our $reposerver = "http://repo.obs.maemo.org:5252";

Configure services as deamons

chkconfig --add obsrepserver obssrcserver obsscheduler obsdispatcher obspublisher obswarden obssigner
 
#Check them
chkconfig -l obsrepserver obssrcserver obsscheduler obsdispatcher obspublisher

Start Services

   rcobsrepserver start
   rcobssrcserver start
   rcobsscheduler start
   rcobsdispatcher start
   rcobspublisher  start

For version 1.7 there are a new services. You can start them as well:

obswarden

  It checks if build hosts are dieing and cleans up hanging builds

obssigner

  It is used to sign packages via the obs-sign daemon. You need to configure
  it in BSConfig.pm before you can use it.

obsservice

  The is the source service daemon. OBS 1.7 just comes with a download
  service so far. This feature is considered to be experimental so far,
  but can be already extended with own services.

Install Lighttpd

lighttpd also needs to be available on backend server. This is required to provide directory listing on the repositories available on this server when an http/s request to maemo-repo is made through web ui.

 
zypper in lighttpd

Create a new file under /etc/lighttpd/vhosts.d/. It can be obs.conf as well, and add:

vi /etc/lighttpd/vhosts.d/obs.conf
 
$HTTP["host"] =~ "repo.obs.maemo.org" {
  server.name = "repo.obs.maemo.org"
 
  server.document-root = "/srv/obs/repos/"
  dir-listing.activate = "enable"
}

To enable vhosts, remember to uncomment the following in the 'custom includes':

vi /etc/lighttpd/lighttpd.conf
##
  ## custom includes like vhosts.
  ##
  #include "conf.d/config.conf"
  # following line uncommented as per
  # /usr/share/doc/packages/obs-api/README.SETUP
  include_shell "cat vhosts.d/*.conf"

Start lighttpd

#first add it as deamon
chkconfig --add lighttpd
rclighttpd start

Installing the Workers

The other 14 hosts on the cluster are reserved to be used as workers, where package builds are going to place.

The same openSuse Tools repository addition must be done for each worker.

cd /etc/zypp/repos.d/;
wget http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_11.2/openSUSE:Tools.repo
zypper ref
# Accept the trust key

Install worker:

zypper in obs-worker

Edit the file /etc/sysconfig/obs-worker in order to point to correct repository server.

vi /etc/sysconfig/obs-worker
OBS_SRC_SERVER="src.obs.maemo.org:5352"
OBS_REPO_SERVERS="repo.obs.maemo.org:5252"

Each worker has 16 CPUs, so 16 workers need to be started.

Start the worker service:

chkconfig --add obsworker
 
rcobsworker start

Retrieved from "https://wiki.maemo.org/OpenSuse_Build_Service/Installation"

Personal tools

Navigation

Views