N900 Hardware USB PHY

(New page: The USB PHY is the physical layer controller for the USB port. =Hardware= =Software= Category:N900 Hardware)
(Hardware)
Line 1: Line 1:
The USB PHY is the physical layer controller for the USB port.
The USB PHY is the physical layer controller for the USB port.
=Hardware=
=Hardware=
 +
 +
The [http://www.nxp.com/ NXP] isp1707a is used as the USB PHY chip. [http://www.spinics.net/lists/linux-usb/msg25167.html]. This rights to this part have been bought by ST-Ericson and some information is [http://www.stericsson.com/sales_marketing_resources/USB_transceiverBR_1.pdf available in a brief marketing sheet].
 +
 +
There is no published datasheet for this chip. It may be available under another name.
 +
 +
A reasonably similar chip (compare chips: [http://www.ebv.com/fileadmin/products/Products/ST-Ericsson/Flyer_USB_Transceivers_1.pdf]) is the 1704 which has a datasheet [http://www.stericsson.com/sales_marketing_resources/CD00222700.pdf]
 +
 +
It is connected to the [[N900 Hardware Battery Charger|battery charger chip]] and the [[N900 Hardware CPU]].
 +
=Software=
=Software=
[[Category:N900 Hardware]]
[[Category:N900 Hardware]]

Revision as of 10:58, 4 June 2010

The USB PHY is the physical layer controller for the USB port.

Hardware

The NXP isp1707a is used as the USB PHY chip. [1]. This rights to this part have been bought by ST-Ericson and some information is available in a brief marketing sheet.

There is no published datasheet for this chip. It may be available under another name.

A reasonably similar chip (compare chips: [2]) is the 1704 which has a datasheet [3]

It is connected to the battery charger chip and the N900 Hardware CPU.

Software