N900 Hardware Bus I2c

(Hardware)
(Hardware)
Line 1: Line 1:
-
=Hardware=
+
=Hardware=  
Bus 1.
Bus 1.
Line 11: Line 11:
tsl2563/2-0029
tsl2563/2-0029
smia-sensor/2-0010
smia-sensor/2-0010
-
aic3x I2C Codec/2-0018
+
* 0x18 0x19 [[N900 Hardware Audio Codec|Audio codec]]
-
aic34b_dummy/2-0019   
+
* 0x30 [[N900 Hardware Flash Torch]]
-
* 0x30 [[N900 Hardware LED Flash Torch]]
+
* 0x63 [[N900 Hardware FM Receiver|FM receiver]]
-
* 0x63 [[N900 Hardware FM Retriever|FM receiver]]
+
tpa6130a2/2-0060
tpa6130a2/2-0060
* 0x32 [[N900 Hardware LED]]
* 0x32 [[N900 Hardware LED]]
Line 20: Line 19:
Bus 3.
Bus 3.
-
* 0x0c [[N900 Hardware Autofocus|Lens focus control]]
+
* 0x0c [[N900 Hardware Auto-focus|Lens focus control]]
* 0x3e [[N900 Hardware Camera Sensor|Front Camera (control)]]
* 0x3e [[N900 Hardware Camera Sensor|Front Camera (control)]]
* 0x1d [[N900 Hardware Accelerometer|Accelerometer]]
* 0x1d [[N900 Hardware Accelerometer|Accelerometer]]

Revision as of 16:02, 7 June 2010

Hardware

Bus 1.

dummy/1-004a dummy/1-0049 dummy/1-004b

Bus 2.

tsl2563/2-0029 smia-sensor/2-0010

tpa6130a2/2-0060

Bus 3.

/sys/bus/i2c/drivers# ls -d */*-*

Software

The n900 software driving I2C comes in three flavours.

Firstly, there are a large number of kernel drivers.

Then, there are a small number of devices 'bit banged' through I2C ioctls - BME for example does this.

Finally, there are probably some I2C components in the Rapuyama and assorted cellphone/GPS hardware. These are not visible to the casual developer. (you have to open the n900 and probe stuff, or hack the phone firmware).