N900 Hardware Bus I2c
(→Bus 3) |
|||
| Line 1: | Line 1: | ||
| + | [http://en.wikipedia.org/wiki/I2C I2C] is a simple serial bus, used in many devices. | ||
| + | |||
=Hardware= | =Hardware= | ||
Revision as of 16:47, 7 June 2010
I2C is a simple serial bus, used in many devices.
Contents |
Hardware
Bus 1
- 0x48 0x49 0x4a 0x4b Gaia/chipset
Bus 2
- 0x18 0x19 Audio codec
- 0x29 N900 Hardware Light Meter
- 0x30 N900 Hardware Flash Torch
- 0x32 N900 Hardware LED
- 0x60 N900 Headphone Amplifier
- 0x63 FM receiver
- 0x55 N900 Hardware Charge Meter
- 0x6B N900 Hardware Battery Charger
smia-sensor/2-0010
Bus 3
- 0x0c Lens focus control
- 0x1d Accelerometer
- 0x3e Front Camera (control)
Software
The n900 software driving I2C comes in three flavours.
Firstly, there are a large number of kernel drivers.
Then, there are a small number of devices 'bit banged' through I2C ioctls - BME for example does this.
Finally, there are probably some I2C components in the Rapuyama and assorted cellphone/GPS hardware. These are not visible to the casual developer. (you have to open the n900 and probe stuff, or hack the phone firmware).