Desktop Command Execution Widget scripts
Line 139: Line 139:
  rootsh reboot | echo ""
  rootsh reboot | echo ""
 +
 +
====Switch radio mode to 2G/3G====
 +
 +
sh /path/to/script/2g3g.sh | echo ""
 +
 +
2g3g.sh:
 +
 +
#!/bin/sh
 +
get=`dbus-send --system --print-reply --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_selected_radio_access_technology | awk '/b/ {print $2}'`
 +
if [ `echo $get` -eq 1 ]; then
 +
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:2
 +
else
 +
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:1
 +
fi
 +
 +
When 3G or Dual mode is active, the script will switch to 2G. And when 2G is active, it will switch to 3G.
 +
====Switch radio mode to 2G====
====Switch radio mode to 2G====

Revision as of 17:41, 21 March 2010

Desktop Command Execution widget is one of the most useful widgets on your Maemo desktop. It can be used to show certain information (for example battery level in percentage) or as a button which can be used for example to disconnect active internet connection (you need to tap 3 times and also wait for menus to appear without this widget). Therefore it can replace many other applications/widgets/applets and you can also make something new. Here you'll find a collection of scripts that can be added to the widget. The discussion about the widget is on the forum.


Contents

Making your own scripts

When there's no output (for example if you're using widget as a button and you use dbus call), the widget displays "Invalid Command". This can be most easily avoided if you pipe echo "" at the end of the command. Example: 

dbus-send -options -moreoptions | echo ""

This also works: 

dbus-send -options -moreoptions; echo ""

...but the piping is preferred for buttons as it doesn't display ANY output (some dbus calls work only with reply). All of the dbus commands should be working in the same way. Collection of these can be found on Phone control wiki page. The basic principle is the same as above (dbus command and piping an echo).

Scripts

To display information

Uptime

uptime|cut -d" " -f4-|sed 's/\\, *load.*//'

Battery (several scripts)

All battery scripts are collected here. Pick the one which suits your needs. Examples of the output values are under each one. 


hal-device bme | awk '/l.p/ {perc = $3}; /g.c/ {curr = $3}; /g.la/ {last = $3}; /s_c/ {isch = $3} END if (isch == "false") {print perc" % ("curr"/"last" mAh)"} else {print "Charging"}'

Output example: 83 % (1000/1200 mAh), when charging Charging. 1000 is current mAh, 1200 is last full mAh. 


hal-device bme | awk '/l.p/ {perc = $3}; /g.c/ {curr = $3}; /s_c/ {isch = $3} END if (isch == "false") {print perc" % ("curr" mAh)"} else {print "Charging"}'

Output example: 83 % (1000 mAh), when charging Charging. 1000 is current mAh. 


hal-device bme | awk -F"[. ]" '$5 == "is_charging" {chrg = $7}; $5 == "percentage" {perc = $7} END if (chrg == "false") {print perc " %"} else {print "Chrg"}'

Output example: 83 %, when charging Chrg 


hal-device bme | grep battery.reporting | awk -F. '{print $3}' | sort | awk '$1 == "current" { current = $3}; $1== "last_full" {print current "/" $3 " mAh"}'

Output example: 1000/1200 mAh. 1000 is current mAh, 1200 is last full mAh. 


hal-device bme | grep l.p | awk '{print $3" %"}'

Output example: 83 % 


hal-device bme | grep g.c | awk '{print $3" mAh"}'

Output example: 1000 mAh (it displays current mAh). 


hal-device bme | grep g.la | awk '{print $3" mAh"}'

Output example: 1200 mAh (it displays last full mAh).


Boot reason

cat /proc/bootreason

Boot count

cat /var/lib/dsme/boot_count

External (WAN) IP

WAN IP only: 

wget -q -O - api.myiptest.com | awk -F"\"" '{print $4}'

WAN IP, ISP and country code: 

wget -q -O - api.myiptest.com | awk -F"\"" '{print $4 " ("$12" "toupper($28)")"}'

Internal (LAN) IP

/sbin/ifconfig | grep "inet addr" | awk -F: '{print $2}' | awk '{print $1}'

This one displays only wlan0 (LAN) IP (this is the one used for SSH, WinSCP, VNC...) 

/sbin/ifconfig | grep wl -A 2 | grep ine | awk -F: '{print $2}' | awk '{print $1}'

Rootfs (percentage)

df | awk '$1 == "rootfs" {print $5}'

Rootfs (free)

df -h | awk ' $1 == "rootfs" {print $4"B"}'

Buttons

Make sure that update policy for button widgets is set only to "update when clicked". "Update when switched to desktop", "update interval" and "network presence" should be disabled to avoid automatic actions. Also keep in mind that widgets are executed at every boot so they can for example automatically disable Wi-Fi when phone boots.

Connect internet (show connections)

dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_ui.show_conn_dlg boolean:false | echo ""

Disconnect internet

dbus-send --system --dest=com.nokia.icd /com/nokia/icd_ui com.nokia.icd_ui.disconnect boolean:true | echo ""

Enable/disable Wi-Fi

rootsh /path/to/script/enable-disable_wi-fi.sh | echo ""

enable-disable_wi-fi.sh: 

#!/bin/sh
out=`ifconfig wlan0`
if [ $? -eq "0" ] ; then
if [ `echo "$out" | grep -c RUNNING` -gt "0" ] ; then
run-standalone.sh dbus-send --system --dest=com.nokia.icd /com/nokia/icd_ui com.nokia.icd_ui.disconnect boolean:true
fi
ifconfig wlan0 down
rmmod wl12xx
run-standalone.sh dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:'Wi-Fi disabled'
exit 2
else
modprobe wl12xx
wl1251-cal
stop wlancond
start wlancond
ifconfig wlan0 up
run-standalone.sh dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_ui.show_conn_dlg boolean:false
exit 0
fi

Don't forget to make it executable.

Increase FM transmitter power

rootsh echo 118 > /sys/class/i2c-adapter/i2c-2/2-0063/power_level | echo ""

Lock screen and keys

dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:locked | echo ""

Reboot

rootsh reboot | echo ""

Switch radio mode to 2G/3G

sh /path/to/script/2g3g.sh | echo ""

2g3g.sh: 

#!/bin/sh
get=`dbus-send --system --print-reply --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_selected_radio_access_technology | awk '/b/ {print $2}'`
if [ `echo $get` -eq 1 ]; then
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:2
else
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:1
fi

When 3G or Dual mode is active, the script will switch to 2G. And when 2G is active, it will switch to 3G.


Switch radio mode to 2G

dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:1 | echo ""

Switch radio mode to 3G

dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:2 | echo ""

Switch radio mode to Dual

dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:0 | echo ""
Retrieved from "https://wiki.maemo.org/Desktop_Command_Execution_Widget_scripts"