R&D mode
generalantilles (Talk | contribs)
(New page: {{midgard_article}} You can enable the R&D mode by passing the "--enable-rd-mode" to flasher. When R&D mode is enabled you can use sudo gainroot to get a root shell on the device the p...)
Newer edit →
(New page: {{midgard_article}} You can enable the R&D mode by passing the "--enable-rd-mode" to flasher. When R&D mode is enabled you can use sudo gainroot to get a root shell on the device the p...)
Newer edit →
Revision as of 09:40, 1 October 2008
 |
This is an article from the old midgard wiki that hasn't yet been fully updated for this wiki, please update it. Please see the talk page for discussion. |
 |
You can enable the R&D mode by passing the "--enable-rd-mode" to flasher.
When R&D mode is enabled
you can use sudo gainroot to get a root shell on the device
the power button turns the device on instantly (usually you have to keep it pressed for a while)
you can enable some R&D mode flags (flasher --set-rd-flags) for various features:
"no-lifeguard-reset" disables the lifeguard process (lifeguard reboots the device when an important system process crashes)
"serial-console" enables the serial console (the serial port pins are next to the battery) and causes a shorter battery life
"no-omap-wd" ???
"no-retu-wd" ???
"no-usb-timeout" ???