Main Page
Contents |
About me
Sometime
My repos
non-optified repo: deb https://repo.codemages.net/ nonopt/ optified repo: deb https://repo.codemages.net/ opt/
What do the repos contain?
- zsh - just don't set it as your default shell
- xmms2 with wavpack, mpg123, mpcdec, ogg, flac, etc... support - also updated to not start at max loud
- fcron - requires some manual work after the install(I'll try to give it an event.d script and do that stuff after the fact but not just yet)
- gcoreutils and gtar
- rsyslog
- curl
- djmount
- tinc
- xset and xrdb
create a fcron user chown fcron:fcron /etc/fcron.* chown -R fcron:fcron /var/spool/fcron Then edit /etc/event.d/rcS-late And after initctl emit MOUNTS_OK put: /etc/init.d/fcron start
Repartitioning
Here is what I did to repartition: http://talk.maemo.org/showpost.php?p=411490&postcount=51
Copied from the post by request:
#!/bin/bash echo "Not for running only REFERENCE!!!" exit ### THIS ALL APPLIES TO ALL PR 1.0 PR 1.0.1 PR 1.1 ### # backup your user mount /dev/mmcblk1p1 /media/mmc1 cp -a /home/user /media/mmc1/ # partitioning sfdisk -uM --no-reread /dev/mmcblk0 << FDSK 0 2048 c 2049 20544 83 22593 768 82 23361 7170 5 23362 2048 83 25410 5120 83 FDSK # REBOOT # do this sometime mkfs.ext2 /dev/mmcblk0p5 mkfs.ext2 /dev/mmcblk0p2 mkfs.ext2 /dev/mmcblk0p6 mkfs.vfat /dev/mmcblk0p1 mkswap /dev/mmcblk0p3 # change /etc/event.d/rcS-late # comment out generation of fstab # the following sed command will add a comment character "#" # at the start of lines 10-20 sed "10,20s:\(.*\):#\1:" /etc/event.d/rcS-late > /etc/event.d/rcS-late.new cp /etc/event.d/rcS-late.new /etc/event.d/rcS-late # add mount /home/user/MyDocs # this sed command inserts /bin/mount /home/user/MyDocs || echo 'Failed to mount' on line 23 sed "23i/bin/mount /home/user/MyDocs || echo 'Failed to mount /home/user/MyDocs partition.'" /etc/event.d/rcS-late > /etc/event.d/rcS-late.new cp /etc/event.d/rcS-late.new /etc/event.d/rcS-late rm /etc/event.d/rcS-late.new # change /etc/init.d/rcS # this sed command starts on line 197 and if it finds: load_extra_module # it will replace it with: load_extra_module newline and a mount for usr and opt sed "197s:load_extra_modules:load_extra_modules\nmount /usr || echo 'Failed to mount /usr'\nmount /opt || echo 'Failed to mount /opt':" /etc/init.d/rcS > /etc/init.d/rcS.new cp /etc/init.d/rcS.new /etc/init.d/rcS rm /etc/init.d/rcS.new # fstab cat << FSTAB > /etc/fstab rootfs / rootfs defaults,errors=remount-ro,noatime 0 0 /dev/mmcblk0p6 /usr ext2 rw,noatime,nodiratime,errors=continue 0 0 /dev/mmcblk0p5 /opt ext2 rw,noatime,nodiratime,errors=continue 0 0 /dev/mmcblk0p3 none swap sw 0 0 /dev/mmcblk0p2 /home ext2 rw,noatime,nodiratime,errors=continue 0 0 /dev/mmcblk0p1 /home/user/MyDocs vfat noauto,nodev,noexec,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed,dmask=000,fmask=0133,rodir 0 0 FSTAB mkdir /usra mount /dev/mmcblk0p6 /usra cp -a /usr/* /usra/ mount /home mount /home/user/MyDocs mount /dev/mmcblk1p1 /media/mmc1 cp -a /media/mmc1/user /home/ mkdir /tmproot mount -o bind / /tmproot
Output of df -h
Filesystem Size Used Available Use% Mounted on rootfs 227.8M 142.0M 81.6M 64% / /dev/mmcblk0p6 4.9G 293.1M 4.4G 6% /usr /dev/mmcblk0p5 2.0G 198.1M 1.7G 10% /opt /dev/mmcblk0p2 19.7G 1.2G 17.5G 6% /home /dev/mmcblk0p1 2.0G 287.4M 1.7G 14% /home/user/MyDocs
Setting profile from the terminal
The reason for fcron in my case was that I wanted the ability to have it set a specific profile at a specific time. This is the script that does this: cat /home/user/setprofile.sh
#!/bin/sh
profile=$1
dbus-send \
--print-reply \
--type=method_call \
--dest=com.nokia.profiled \
/com/nokia/profiled com.nokia.profiled.set_profile \
string:$profile > /dev/null
echo "$(date +%Y-%m-%dT%H:%M) Set profile to $profile" > /tmp/setprofile.sh.log
My remove list
Stuff I removed by default
adobe-flashplayer amazon-installer ap-installer as-config-applet-0 as-daemon-0 camel-as-provider-0 camelisync ezitext-czech ezitext-danish ezitext-dutch ezitext-english-gb ezitext-english-us ezitext-essential-plugins ezitext-finnish ezitext-french-ca ezitext-french-fr ezitext-german ezitext-greek ezitext-italian ezitext-norwegian ezitext-polish ezitext-portuguese-pt ezitext-russian ezitext-spanish-es ezitext-spanish-us ezitext-swedish facebook-installer foreca-installer google-search-widget hildon-welcome hildon-welcome-default-logo libas-common-utils-0 libas-protocol-0 libas-storage-0 libezitext libtinymail-1.0-0 libtinymail-camel-1.0-0 libtinymail-gnomevfs-1.0-0 libtinymail-maemo-1.0-0 libtinymailui-1.0-0 libtinymailui-gtk-1.0-0 modest modest-as-plugin-0 modest-l10n-cscz modest-l10n-dadk modest-l10n-dede modest-l10n-engb modest-l10n-enus modest-l10n-eses modest-l10n-esmx modest-l10n-fifi modest-l10n-frca modest-l10n-frfr modest-l10n-itit modest-l10n-mr0 modest-l10n-nlnl modest-l10n-nono modest-l10n-plpl modest-l10n-ptpt modest-l10n-ruru modest-l10n-svse modest-nokiamessaging-plugin-l10n-cscz modest-nokiamessaging-plugin-l10n-dadk modest-nokiamessaging-plugin-l10n-dede modest-nokiamessaging-plugin-l10n-engb modest-nokiamessaging-plugin-l10n-enus modest-nokiamessaging-plugin-l10n-eses modest-nokiamessaging-plugin-l10n-esmx modest-nokiamessaging-plugin-l10n-fifi modest-nokiamessaging-plugin-l10n-frca modest-nokiamessaging-plugin-l10n-frfr modest-nokiamessaging-plugin-l10n-itit modest-nokiamessaging-plugin-l10n-mr0 modest-nokiamessaging-plugin-l10n-nlnl modest-nokiamessaging-plugin-l10n-nono modest-nokiamessaging-plugin-l10n-plpl modest-nokiamessaging-plugin-l10n-ptpt modest-nokiamessaging-plugin-l10n-ruru modest-nokiamessaging-plugin-l10n-svse modest-providers-data nokiamessaging osso-startup-wizard osso-tutorial-l10n-cscz osso-tutorial-l10n-dadk osso-tutorial-l10n-dede osso-tutorial-l10n-engb osso-tutorial-l10n-enus osso-tutorial-l10n-eses osso-tutorial-l10n-esmx osso-tutorial-l10n-fifi osso-tutorial-l10n-frca osso-tutorial-l10n-frfr osso-tutorial-l10n-itit osso-tutorial-l10n-mr0 osso-tutorial-l10n-nlnl osso-tutorial-l10n-nono osso-tutorial-l10n-plpl osso-tutorial-l10n-ptpt osso-tutorial-l10n-ruru osso-tutorial-l10n-svse ovi-promotion-widget rtcom-accounts-plugin-gtalk rtcom-accounts-plugin-nokiachat sharing-rtcom sharing-service-flickr sharing-service-ovi skyhost-bin skyhost-vengine status-area-applet-activesync-0 telepathy-spirit tutorial-home-applet dtg-installer osso-accounts-plugin-skype rtcom-abook-skype-plugin hildon-desktop-application-shortcuts-mr0
You can check what any of these are with: apt-cache show name
Bootmenu
The following is my setup for /bootmenu.sh
It is still a work in progress and requires FBCON to be actually usable.
umask 022
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MODULES="twl4030-vibra
dspbridge
iommu2
omap3-iommu
omap34xxcam-mod
omap_previewer_hack
board-rx51-camera
et8ek8
ad5820
adp1653
vs6555
uinput"
if [ -L /var/run ]
then
rm -f /var/run
mkdir /var/run
fi
mount -n -t proc proc /proc
mount -n -t sysfs sysfs /sys
mount -n -t tmpfs -o size=1M,noatime tmpfs /tmp
mount -n -t tmpfs -o size=256k,mode=0755,nosuid,noatime tmpfs /var/run
mount_devpts() {
TTYGRP=5
TTYMODE=620
if [ ! -d /dev/pts ]
then
mkdir /dev/pts
fi
if [ ! -c /dev/ptmx ]
then
mknod /dev/ptmx c 5 2
chmod 666 /dev/ptmx
fi
mount -n -t devpts -ogid=$TTYGRP,mode=$TTYMODE devpts /dev/pts
rm -rf /var/tmp/*
}
# I hate this hack. -- Md
make_extra_nodes () {
if [ "$(echo /lib/udev/devices/*)" != "/lib/udev/devices/*" ]; then
cp -a /lib/udev/devices/* /dev/
fi
grep '^[^#]' /etc/udev/links.conf | \
while read type name arg1; do
[ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] ||continue
case "$type" in
L)
ln -s $arg1 /dev/$name
;;
D)
mkdir -p /dev/$name
;;
M)
mknod /dev/$name $arg1 && chmod 600 /dev/$name
;;
*)
echo "unparseable line ($type $name $arg1)"
;;
esac
done
}
load_extra_modules () {
echo -n "Loading extra modules..."
for i in $MODULES; do
echo "Loading $i"
modprobe -q $i ||:
done
echo "done."
}
# Mount home and paging partitions if they are available
mount_mmc(){
device=$1
swap=$device"p1"
home=$device"p2"
test=$device"p3"
if [ -e $test ]
then
echo "Mounting partition $swap for paging"
# swap disabled as a workaround for Xorg bug, per NB#111807.
swapon $swap
modprobe ext3
echo "Mounting partition $home as home directory"
mount -t ext3 -o noatime,commit=1,data=writeback $home /home
else
echo "No paging partition available as $swap"
echo "No home partition available as $home"
fi
}
prepare_start_udev()
{
. /etc/udev/udev.conf
if [ -z "$tmpfs_size" ]; then
tmpfs_size="1M"
fi
ACTION=add
echo -n "Mounting a tmpfs over /dev..."
mount -n -o size=$tmpfs_size,mode=0755,noatime -t tmpfs none /dev
echo "done."
mkdir -p /dev/.udev/db /dev/.udev/queue
echo "" > /sys/kernel/uevent_helper
echo -n "Creating extra device nodes... "
make_extra_nodes
echo "done."
}
start_udev()
{
prepare_start_udev
/sbin/udevd --daemon
}
make_nodes()
{
echo -n "Creating device nodes... "
if [ -x /sbin/udevtrigger ]; then
/sbin/udevtrigger
else
/sbin/udevadm trigger
#wait for all events
/sbin/udevadm settle
fi
echo "done."
}
start_udev
make_nodes
load_extra_modules
export BOOTSTATE=LOCAL
touch /tmp/$BOOTSTATE
echo $BOOTSTATE > /tmp/STATE
source /etc/resource_limits.conf
echo "About to exec dsme in state '$BOOTSTATE'."
/sbin/dsme -p /usr/lib/dsme/libstartup.so &
e2fsck -vvv -f /dev/mmcblk0p1
e2fsck -vvv -f /dev/mmcblk0p2
e2fsck -vvv -f /dev/mmcblk0p5
e2fsck -vvv -f /dev/mmcblk0p6
mount /usr/local || echo 'Failed to mount /usr/local'
mount /opt || echo 'Failed to mount /opt'
mount_devpts
mount -n -o size=64M,nosuid,nodev,noatime -t tmpfs tmpfs /dev/shm
/sbin/hwclock -s || true
hostname -F /etc/hostname
ifup lo &
ifup usb0 &
echo 0 > /proc/sys/net/ipv4/conf/default/accept_redirects
echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter
echo 1 > /proc/sys/net/ipv4/conf/default/rp_filter
echo 1 > /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses
echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
echo "49152 65535" > /proc/sys/net/ipv4/ip_local_port_range
echo 6000 > /sys/class/bluetooth/hci0/idle_timeout
# adjust other kernel parameters to minimize memory consumption
# and optimize IO pressure
echo 8 > /proc/sys/kernel/pty/max
echo 1024 > /proc/sys/kernel/threads-max
echo 8192 > /proc/sys/fs/file-max
echo 100 > /proc/sys/vm/swappiness
echo 5 > /proc/sys/vm/page-cluster
echo 500 > /proc/sys/vm/dirty_expire_centisecs
echo 65536 > /proc/sys/net/core/rmem_default
echo 16384 > /proc/sys/net/core/wmem_default
# Disable sysrq to avoid accidental console-carbage resets.
echo 0 > /proc/sys/kernel/sysrq
echo "/what/me/worry" > /proc/sys/kernel/core_pattern
echo 1 > /proc/sys/kernel/panic
echo 1 > /proc/sys/kernel/panic_on_oops
export BOOTSTATE=LOCAL
touch /tmp/$BOOTSTATE
echo $BOOTSTATE > /tmp/STATE
source /etc/resource_limits.conf
echo "About to exec dsme in state '$BOOTSTATE'."
/sbin/dsme -p /usr/lib/dsme/libstartup.so &
if [ ! -d /var/run/sshd ] ; then
mkdir /var/run/sshd
chmod 755 /var/run/sshd
/usr/sbin/sshd -D &
fi
exec /bin/sh