Editing Documentation/Maemo PC Connectivity Tutorial/Remote Access

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

Maemo PC Connectivity provides tools to access the desktop of a remote machine from a local machine over the network. That is, you can have the desktop GUI of your Maemo device displayed on your host PC and vice-versa. For that, you need to install Maemo PC Connectivity on the Maemo device and Host PC Connectivity on the host PC (Linux, Windows and Mac OS X). This chapter describes how to use these remote desktop tools. For simplicity, it is assumed that you already have a USB network working between the Maemo device and the host PC.

== Using X11VNC ==

With the X11VNC server, it is possible to share the GUI (Graphical User Interface) of your Maemo device with your host PC. That is, you can access the desktop of your Maemo device remotely from the host PC as you are physically using it. Below is described how to configure your Maemo device and host PC for X11VNC access.

=== Configuring X11VNC for Maemo ===

If you installed Maemo PC Connectivity, your Maemo device already has a X11VNC server installed.

You can configure the X11VNC server through the PC Connectivity Manager applet, as described below.

* Run '''Settings - Control Panel - Connectivity - PC Connectivity Manager'''.
* Click on the '''Advanced''' button.
* Select the '''Tool Manager''' tab.
* Now you can enable and disable the X11VNC server, change the UDP port and set the loop mode, figure [[#figure-pc_connectivity_mpc_maemo_nm_x11vnc|5.3]].
* Click on the '''Apply''' button.

<div id="figure-pc_connectivity_mpc_maemo_nm_x11vnc">
[[Image:mpc_maemo_nm_x11vnc.png|frame|center|alt=Screenshot of X11VNC|'''Figure 5.3:''' PC Connectivity Manager - X11VNC tool]]
</div>

As the X11VNC server is not launched automatically when you turn the Maemo device on, you need to start it manually. You can use the PC Connectivity Manager wizard or start X11VNC as any third-party application from the installed application list.

=== Configuring X11VNC for Linux ===

If you installed Host PC Connectivity, your Linux host PC already has a VNC client called TightVNC Viewer. Otherwise, you should install the VNC client manually from [http://www.tightvnc.com/download.php TightVNC download] page.

$ sudo apt-get install xtightvncviewer

You can access your Maemo device through the TightVNC Viewer application by giving the Maemo device IP address.

$ xtightvncviewer 192.168.2.15

=== Configuring X11VNC for Windows ===

If you installed Host PC Connectivity, your Windows host PC already has a VNC client called TightVNC Viewer. Otherwise, you can download and install TightVNC manually from [http://www.tightvnc.com/download.php TightVNC download] page.

You can access your Maemo device through the TightVNC Viewer application by giving the Maemo device IP address.

* Run '''Start - Programs - TightVNC - TigthtVNC Viewer''', figure [[#figure-pc_connectivity_mpc_win_vnc_ip|5.4]].
* Type the IP address of your Maemo device and press the '''Connect''' button.

<div id="figure-pc_connectivity_mpc_win_vnc_ip">
[[Image:mpc_win_vnc_ip.png|frame|center|alt=Screenshot of TightVNC connection dialog|Figure 5.4: TightVNC connection dialog]]
</div>

Now you should see the desktop of your Maemo device on the host PC screen, figure [[#figure-pc_connectivity_mpc_win_vnc_desktop|5.5]].

<div id="figure-pc_connectivity_mpc_win_vnc_desktop">
[[Image:mpc_win_vnc_desktop.png|frame|center|alt-Screenshot of TightVNC remote desktop|Figure 5.5: TightVNC remote desktop on Windows]]
</div>

=== Configuring X11VNC for Mac OS X ===

If you installed Host PC Connectivity, your Windows host PC already has a VNC client called TightVNC Viewer. Otherwise, you can download and install TightVNC Java version manually from [http://www.tightvnc.com/download.php TightVNC download] page.

* Download the TightVNC Java version.
* Create a new folder and uncompress the zip file.

$ mkdir ~/tightvnc
 $ mv tightvnc-1.3.10_javabin.tar.gz ~/tightvnc
 $ cd ~/tightvnc
 $ tar -zxvf tightvnc-1.3.10_javabin.tar.gz

You can access your Maemo device through the TightVNC Viewer application by giving the Maemo device IP address.

$ java VncViewer HOST 192.168.2.15 PORT 5900

Now, you should see the desktop of your Maemo device on the host PC screen, figure [[#fig:pc_connectivity_mpc_mac_vnc_desktop|5.6]].

{| summary="TightVNC remote desktop on Mac OS X"
|+ align="BOTTOM" |'''Figure 5.6:''' TightVNC remote desktop on Mac OS X
|-
|
[[Image:mpc_mac_vnc_desktop.png|Image mpc_mac_vnc_desktop]]
|}

=== Troubleshooting X11VNC ===

The current X11VNC server (0.9.3-maemo4) available for Maemo Diablo devices may crash if a key is pressed on the host PC keyboard and there is no mapping for that key on the Maemo device. A workaround is to manually add missing key mappings as described below.

You should install the <code>xev</code> application to the host PC to trace the key codes, which crash the Maemo device.

Here is how to install <code>xev</code> to the Linux host PC.

$ sudo apt-get install x11-utils

Execute the <code>xev</code> application on the host PC.

$ xev

Type the key on the host PC that crashes the Maemo device. You get something like this on <code>xev</code> output.

<pre>
KeyPress event, serial 31, synthetic NO, window 0x2000001,
root 0x3f, subw 0x0, time 2488134890, (-257,171), root:(294,445),
state 0x10, keycode 48 (keysym 0xfe51, dead_acute), same_screen YES,
XLookupString gives 2 bytes: (c2 b4) "'"
XmbLookupString gives 0 bytes:
XFilterEvent returns: True
</pre>

Get the key code name. In this example, it is <code>>dead_acute</code>. On the Maemo Diablo device, map this key to '''None''' in the <code>/usr/share/applications/hildon/x11vnc.desktop</code> file. Add the key mapping for '''dead_acute-None''' as described below.

Exec=/usr/bin/x11vnc -display :0 -nowf -noxdamage -noscr -remap dead_acute-None,<key_name_1>-None,<key_name_N>-None

On your Maemo Diablo device, restart X11VNC server and check if the problem got fixed.

== Using Rdesktop ==

Rdesktop is a client to access remotely your Windows host PC from your Maemo device. Below are instructions on how to enable Rdesktop access for your Windows host PC and how to use the Rdesktop client on your Maemo device to access the desktop of your Windows host PC.

=== Configuring Rdesktop for Windows ===

You must enable the '''Remote Desktop''' feature on your Windows host PC so that you can control it remotely from your Maemo device. For that, you must be logged on as an administrator or as a member of the Administrators group for your Windows PC to enable the Remote Desktop feature.

To set up your Windows host PC for Rdesktop access:

* Click '''Start''', point to '''Settings''', click '''Control Panel''', and then double-click the '''System''' icon.
* On the '''Remote''' tab, select the '''Allow users to connect remotely to this computer''' check-box, figure [[#fig:pc_connectivity_mpc_win_rdesktop|5.7]].
* Ensure that you have the proper permissions to connect to your host PC remotely. For that, click the '''Select Remote Users...''' button to give access to your user account.
* Click the '''OK''' button.
* Leave your host PC running and connected to the network with Internet access.

{| summary="Windows Remote Access configuration"
|+ align="BOTTOM" |'''Figure 5.7:''' Windows Remote Access configuration
|-
|
[[Image:mpc_win_rdesktop.png|Image mpc_win_rdesktop]]
|}

If you are running Windows XP Service Pack 2 and you enable Remote Desktop, Windows Firewall is automatically configured to allow Remote Desktop connections to your host PC. However, Remote Desktop does not work if you have Windows Firewall configured to allow no exceptions. To allow exceptions in Windows Firewall, open '''Security Center''' from the '''Control Panel''', click '''Windows Firewall''' and clear the check-box next to '''Don't allow exceptions'''.

=== Configuring Rdesktop for Maemo device ===

If you installed Maemo PC Connectivity, your Maemo device already has a Rdesktop client installed.

Open '''Utilities - X Terminal''' and execute Rdesktop application.

<pre>
$ rdesktop-cli -u <windows_user> -p <windows_password> <windows_ip_address>
</pre>

You must pass your user name and password to access the given Windows host PC.

Now, you should see the desktop of your Windows host PC on your Maemo device screen.

== Using X Tunneling ==

With X Tunneling, it is possible to execute an application on your Maemo device and display its GUI on your host PC screen and vice versa using an SSH connection. Below are instructions on how to configure X11 tunneling between the Maemo device and Linux and Max OS X host PC.

You should follow these steps to display the GUI of your Maemo device on your host PC. These instructions work with Linux and Mac OS X host PCs.

On Linux and Mac OS X host PCs:

<pre>
$ Xephyr :3 -ac -dpi 96 -screen 800x480x16 -host-cursor &
$ ssh -l <maemo_device_user> -R 6002:<host_pc_ip>:6003 <maemo_device_ip>
$ export DISPLAY=:2
$ /usr/lib/sapwood/sapwood-server &
$ <run_application>
</pre>

You should follow these steps to display the GUI of your Linux host PC on your Maemo device. These instructions work only with Linux host PCs.

On a Maemo device:

[[Category:Documentation]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "https://wiki.maemo.org/Documentation/Maemo_PC_Connectivity_Tutorial/Remote_Access"

Personal tools

Navigation

Views

Editing Documentation/Maemo PC Connectivity Tutorial/Remote Access

@@ Line 18: / Line 18: @@
 <div id="figure-pc_connectivity_mpc_maemo_nm_x11vnc">
-[[Image:mpc_maemo_nm_x11vnc.png|frame|center|alt=Screenshot of X11VNC|Figure 5.3: PC Connectivity Manager - X11VNC tool]]
+[[Image:mpc_maemo_nm_x11vnc.png|frame|center|alt=Screenshot of X11VNC|'''Figure 5.3:''' PC Connectivity Manager - X11VNC tool]]
 </div>
@@ Line 68: / Line 68: @@
   $ java VncViewer HOST 192.168.2.15 PORT 5900
-Now, you should see the desktop of your Maemo device on the host PC screen, figure [[#figure-pc_connectivity_mpc_mac_vnc_desktop|5.6]].
+Now, you should see the desktop of your Maemo device on the host PC screen, figure [[#fig:pc_connectivity_mpc_mac_vnc_desktop|5.6]].
-<div id="figure-pc_connectivity_mpc_mac_vnc_desktop">
+{| summary="TightVNC remote desktop on Mac OS X"
-[[Image:mpc_mac_vnc_desktop.png|frame|center|alt=Screenshot of TightVNC on Mac OS X|Figure 5.6: TightVNC remote desktop on Mac OS X]]
+|+ align="BOTTOM" |'''Figure 5.6:''' TightVNC remote desktop on Mac OS X
-</div>
+|-
+|
+[[Image:mpc_mac_vnc_desktop.png|Image mpc_mac_vnc_desktop]]
+|}
 === Troubleshooting X11VNC ===
@@ Line 116: / Line 119: @@
 * Click '''Start''', point to '''Settings''', click '''Control Panel''', and then double-click the '''System''' icon.
-* On the '''Remote''' tab, select the '''Allow users to connect remotely to this computer''' check-box, figure [[#figure-pc_connectivity_mpc_win_rdesktop|5.7]].
+* On the '''Remote''' tab, select the '''Allow users to connect remotely to this computer''' check-box, figure [[#fig:pc_connectivity_mpc_win_rdesktop|5.7]].
 * Ensure that you have the proper permissions to connect to your host PC remotely. For that, click the '''Select Remote Users...''' button to give access to your user account.
 * Click the '''OK''' button.
 * Leave your host PC running and connected to the network with Internet access.
-<div id="figure-pc_connectivity_mpc_win_rdesktop">
+{| summary="Windows Remote Access configuration"
-[[Image:mpc_win_rdesktop.png|frame|center|alt=Screenshot of Windows Remote Access configration|Figure 5.7: Windows Remote Access configuration]]
+|+ align="BOTTOM" |'''Figure 5.7:''' Windows Remote Access configuration
-</div>
+|-
+|
+[[Image:mpc_win_rdesktop.png|Image mpc_win_rdesktop]]
+|}
 If you are running Windows XP Service Pack 2 and you enable Remote Desktop, Windows Firewall is automatically configured to allow Remote Desktop connections to your host PC. However, Remote Desktop does not work if you have Windows Firewall configured to allow no exceptions. To allow exceptions in Windows Firewall, open '''Security Center''' from the '''Control Panel''', click '''Windows Firewall''' and clear the check-box next to '''Don't allow exceptions'''.