Gentoo/N900

(Install and configure the Portage tree, with N900 overlay: Need musl overlay)
(Configure timezone: Update to work)
Line 136: Line 136:
===Configure timezone===
===Configure timezone===
 +
USE=-nls emerge -1 timezone-data<!-- timezone-data[nls] broken in current musl stage3 as of 2015-07-21 -->
  ls /usr/share/zoneinfo
  ls /usr/share/zoneinfo
-
cp /usr/share/zoneinfo/UTC /etc/localtime
 
  echo "UTC" > /etc/timezone
  echo "UTC" > /etc/timezone
-
 
+
emerge --config timezone-data
==Booting==
==Booting==

Revision as of 08:04, 21 July 2015

This is the official page for the unofficial port of Gentoo to N900 internet tablets.

If you have any questions/troubles, you can find me on freenode #maemo and #gentoo-embedded (webchat).

Bootable with X, WiFi, SMS, and GPRS

Contents

Overview / Todo list

  • Main display
  • Battery charger daemon (or kernel integration)
  • Keyboard (X11)
  • GPRS/UMTS data connections
    • Integrated with Gentoo network subsystems
  • SMS
  • Audio output (NOT SAFE: see highpass filter)
  • Voice calls
    • Cellular
    • Ring/vibrate
    • SIP
    • XMPP
  • Front camera
    • Camera button
    • Autofocus
  • Usable GUI
    • Razor-qt?
    • KDE Plasma Active?
  • Video calls (webcam)
    • Skype support?
  • Flashlight (SAFETY RESTRICTIONS NEEDED)
  • GPS (gpsd driver)
    • Road navigation
    • Dead reckoning w/ accelerometers?
    • Cellular
  • TV out
  • FM transmitter
  • Keyboard (console)
  • Bluetooth
    • Headset
    • GPS
    •  ??
  • Infrared transmitter
  • 3D acceleration
  • FM receiver

Installation

Partitioning

If you use the internal memory card, be sure to leave your Maemo partitions in the same partition order as before (unless you don't want to run Maemo anymore, of course)

Unless you're super-careful doing this, you will probably lose all the data on the partitions you change. Backup!

First, dump your current partition layout:

sfdisk -d /dev/mmcblk0 > ptable

Now, edit the ptable file with your favourite editor and load the modified one:

sfdisk --no-reread /dev/mmcblk0 < ptable

Here is how I partitioned my internal SSD:

unit: sectors
/dev/mmcblk0p1 : start=       64, size=  4194304, Id= c
/dev/mmcblk0p2 : start= 56631360, size=  4194304, Id=83
/dev/mmcblk0p3 : start= 60825664, size=  1572864, Id=82
/dev/mmcblk0p4 : start=  4194368, size= 52436992, Id= 5
/dev/mmcblk0p5 : start=  4194384, size= 20971568, Id=83
/dev/mmcblk0p6 : start= 25165968, size= 31465392, Id=83</blockquote>

If you're more conforable with standard Linux fdisk, supposedly the deb from Debian Lenny works. See the official Gentoo handbook if you need help using fdisk to edit your partition table.

Creating Filesystems

Since you are installing on a SSD that may very well queue its writes out of order, ext3 and other journaling filesystems designed for magnetic/write-in-order drives are generally a bad idea and may be very dangerous to use. If you're using an old kernel, such as the original Fremantle kernel, you'll have to stick to ext2. If you are using a recent "power" kernel (or modern kernel), you can use ext4 without journal support (but possibly these do not have ext4 ACLs/xattrs enabled).

I recommend making swap on an external MicroSD so when you destroy it, it can be replaced (unlike the internal one).

Mounting

Due to Maemo using the FHS /media for other partitions, I chose to use it for the Gentoo mount too. You can use Gentoo's standard /mnt here if you want, I think.

mount -t ext2 /dev/mmcblk0p5 /mnt/gentoo

Installing Gentoo

Be sure your system clock is correct before proceeding. Weird things happen when it's not.

Download the latest *vanilla* armv7a_hardfp musl stage3 from Gentoo. Note that standard glibc stage3 will no longer work as it includes glibc 2.20, which is incompatible with the older kernels needed for N900. You could try uclibc instead, but nobody has tried that thus far, so you're on your own.

Just in case, download the .DIGESTS file too, and verify your download with:

grep -A1 SHA512 stage3-*DIGESTS | sha512sum -c

Now, proceed to unpack the stage3:

cd /media/gentoo
tar xvjpf stage3-*.tar.bz2

Configure your compile options (/media/gentoo/etc/portage/make.conf) next.

Recommended (only safe to use unmodified for musl hardfp ABI!):

CHOST="armv7a-hardfloat-linux-musleabi"
# WARNING: -mthumb -mthumb-interwork require a Thumb-safe kernel! Remove them otherwise.
CFLAGS="-O2 -pipe -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=hard -mthumb -mthumb-interwork"
CXXFLAGS="${CFLAGS}"
ASFLAGS="-mcpu=cortex-a8 -mfpu=neon -mfloat-abi=hard -mthumb -mthumb-interwork"

# Distcc is a good idea, if you setup a cross-compiler on another Gentoo system
FEATURES="${FEATURES} distcc"
# MAKEOPTS -jN should probably be the number of systems in your distcc array; but never more than 2 when building KDE software (meinproc uses a lot of memory and won't be distributed)!
MAKEOPTS="-j2"

# Since the N900 doesn't have a lot of RAM, you'll probably need to sacrifice some CPU time to minimize memory usage
LDFLAGS="${LDFLAGS} -Wl,--no-keep-memory -Wl,--reduce-memory-overheads"
# The following thing increased building times of some packages (paludis and cryptography, for instance) insanely and the man page suggests it is of questionable utility
CFLAGS="${CFLAGS} --param ggc-min-expand=0 --param ggc-min-heapsize=32768"

PORTAGE_NICENESS="10"
PORTAGE_IONICE_COMMAND="ionice -c 3 -p \${PID}"

Chroot

cp -L /etc/resolv.conf etc/
mount -t proc proc proc
mount -o bind /dev dev
mount -t devpts devpts dev/pts
env -i chroot . /bin/bash
env-update
source /etc/profile
export PS1="(chroot) $PS1"

Install and configure the Portage tree, with N900 overlay

emerge --sync --quiet
USE='-* git curl ssl curl_ssl_openssl python_targets_python2_7' emerge layman
# be sure to follow layman post-install instructions to edit make.conf
layman -fa n900
eselect profile set n900:n900/armv7a-hardfloat-linux-musleabi
layman -a musl

Configure timezone

USE=-nls emerge -1 timezone-data
ls /usr/share/zoneinfo
echo "UTC" > /etc/timezone
emerge --config timezone-data

Booting

Configuring your kernel

If you just want to use your Maemo kernel, simply copy /lib/modules/* from your Maemo partition into Gentoo (you'll need to exit the chroot first).

However, if you want to build one yourself (required for any custom kernel modules, or non-X11 console), follow these steps:

emerge fremantle-power-sources  # regular fremantle-sources is also available
cd /usr/src/linux
make menuconfig
# (configure the kernel as you like here)
make && make modules_install
# (copy arch/arm/boot/zImage to your host system to flash as the N900's kernel)

Note that this kernel will not boot Maemo without setting up the modules on the Maemo partition. I believe this is as simple as copying the directory and running depmod on that side, but I'll have to review it before I'm sure.

You can skip the compiling (but you still need to install the sources!) if you want, by using one of my prebuilt kernels.

Configuring your system etc

The following steps from Gentoo's official handbook are just fine here:

Installing N900-required stuff

The n900-env metapackage should pull in all the essentials for your N900. If you don't want some N900 functionality, you can change your USE flags in make.conf prior to installing it.

USE flag Description
bluetooth BlueZ and Bluetooth firmware
cellular or gps Ofono
nokia-osso-linux Maemo "bootmenu" compatibility
v4l Camera firmware
wifi Wifi firmware and tools
X X11 drivers
emerge n900-env

X11 setup

Create /etc/X11/xorg.conf with the following:

Section "Device"
    Identifier "Configured Video Device"
    Driver "omapfb"
    Option "fb" "/dev/fb0"
EndSection

Section "InputClass"
    Identifier "calibration"
    MatchProduct "TSC2005 touchscreen"
    Option "Calibration" "194 3901 3739 241"
EndSection

Section "InputClass"
    Identifier  "keyboard"
    MatchProduct    "omap_twl4030keypad"

    Option "XkbOptions" "grp:ctrl_shift_toggle"
    Option "XkbLayout" "nokia_vndr/rx-51(common)+nokia_vndr/rx-51(us)"
    Option "XkbModel" "nokia"
EndSection

Section "InputClass"
    Identifier "touchscreen"
    MatchProduct "TSC2005 touchscreen"

    Driver "tslib"
    Option "EmulateRightButton"    "1"
EndSection

Sound setup

This basically "just works", but be careful when unmuting - it's possible to play audio that destroys the internal speakers! If you're experienced in writing highpass filters, please contact me to help resolve this.

Cellular setup

Install Ofono

emerge net-misc/ofono

Configure GPRS networking

ln -s net.lo /etc/init.d/net.gprs0

Edit /etc/conf.d/net:

rc_need_gprs0='ofono'
modem_gprs0='n9000'  # The extra zero is the n900 instance number 0 :)
context_apn_gprs0='epc-scpcf000.t-mobile.com'  # Other providers need other APNs!
context_protocol_gprs0='ipv6'

Start the GPRS interface:

/etc/init.d/net.gprs0 start

Send SMS

ofono-send-sms n9000 15555551212 'Hey there!'

Voice call

ofono-dial-number n9000 15555551212

Note the other end will probably get silence, and you won't hear them either. I'm working on an ALSA plugin to fix this.

WiFi setup

ln -s net.lo /etc/init.d/net.wlan0

Edit /etc/conf.d/net:

mac_wlan0='00:1f:df:xx:xx:xx'  # You MUST set this, or N900's wlan MAC won't be initialized!
preferred_aps='my_wep_network my_public_network linksys etc'
key_my_wep_network='abcd-ef00-1234-5678-9abc-def0-12'
modules="!wpa_supplicant"

Start the wlan interface:

/etc/init.d/net.wlan0 start

Bluetooth setup

It's on my todo list, but not very high priority since I don't really use anything Bluetooth...

GPS setup

I've reverse engineered the cellmo GPS protocols, and written a NMEA proxy that mostly works with gpsd. When I get to properly integrating GPS support, I plan to write an actual gpsd driver so a proxy isn't needed.

Known problems

Webkit linking memory usage

WebKit requires an absurd amount of memory to link. I build binary packages inside qemu when it needs to be bumped. I suggest you use them.

Modern kernel

Current status: http://elinux.org/N900