Editing Mer/Releases/0.8
Warning: You are not logged in.
Your IP address will be recorded in this page's edit history.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 217: | Line 217: | ||
=== BeagleBoard port === | === BeagleBoard port === | ||
- | * [http://stskeeps.subnetmask.net/mer/0.8/mer-armel-beagleboard-bootfs-v0.8.tar.gz Boot filesystem], contains uImage (kernel packaged for uboot) | + | * [http://stskeeps.subnetmask.net/mer/0.8/mer-armel-beagleboard-bootfs-v0.8.tar.gz Boot filesystem], contains uImage (kernel packaged for uboot) for latest uboot (you must flash it) |
* [http://stskeeps.subnetmask.net/mer/0.8/mer-armel-beagleboard-rootfs-v0.8.tar.gz Root filesystem] | * [http://stskeeps.subnetmask.net/mer/0.8/mer-armel-beagleboard-rootfs-v0.8.tar.gz Root filesystem] | ||
==== Guide ==== | ==== Guide ==== | ||
- | * Make sure you are running a RECENT uBoot, and you have USB | + | * Make sure you are running a RECENT uBoot, and you have USB gadgets like keyboard or mouse, if you don't own a touchscreen.. |
* Make a SD card, partitioned with 50mb FAT as first partition, extract boot fs on this, and the rest Linux partition, format this as ext3, and extract rootfs on this. | * Make a SD card, partitioned with 50mb FAT as first partition, extract boot fs on this, and the rest Linux partition, format this as ext3, and extract rootfs on this. | ||
* In uBoot, use the following commands (you may have to adjust video= parameter to match your display screen: | * In uBoot, use the following commands (you may have to adjust video= parameter to match your display screen: |
Learn more about Contributing to the wiki.