N900 LCD panel

(Hardware)
(Hardware: PWM)
 
(2 intermediate revisions not shown)
Line 26: Line 26:
  18 MISO
  18 MISO
  19 CS2
  19 CS2
-
  20 V18
+
  20 V18( 1.8V Supply )
-
  21 V28
+
  21 V28( 2.8V Supply )
  22 CABC
  22 CABC
  23 LED1-
  23 LED1-
  24 LED2-
  24 LED2-
  Shield GND
  Shield GND
 +
 +
CABC is a PWM output line which gets or'ed with the LCD_LEDS signal from GAIA and fed to the EN pin of the backlight driver to control backlight brightness.
 +
 +
Pin 15, 17, 18 and 19 are a SPI interface.
 +
 +
Pins 11 thru 14 are connected to the touch panel connector on the LCD flatcable.
==Software==
==Software==
[[Category:N900 Hardware]]
[[Category:N900 Hardware]]

Latest revision as of 16:23, 20 October 2014

The LCD is the display of the N900. It has a resistive touchscreen on top.

[edit] Hardware

The main display is a ACX565AKM LCD panel, manufactured by Sony.

The pinout for the LCD Panel's connector is:

1  LED2+
2  LED1+
3  GND
4  Data0-
5  Data0+
6  Clock-
7  Clock+
8  Data1-
9  Data1+
10 GND
11 Touch Y-
12 Touch X+
13 Touch Y+
14 Touch X-
15 SCLK
16 RESET
17 MOSI
18 MISO
19 CS2
20 V18( 1.8V Supply ) 
21 V28( 2.8V Supply )
22 CABC
23 LED1-
24 LED2-
Shield GND

CABC is a PWM output line which gets or'ed with the LCD_LEDS signal from GAIA and fed to the EN pin of the backlight driver to control backlight brightness.

Pin 15, 17, 18 and 19 are a SPI interface.

Pins 11 thru 14 are connected to the touch panel connector on the LCD flatcable.

[edit] Software