PEAP+MSCHAPv2 WiFi authentication setup

(New page: == PEAP + MSCHAPv2 WiFi Authentication, eduroam == Some educational sites using eduroam support this method, some use EAP-TTLS+PAP which does not work. PEAP + MSCHAPv2 is quite popular au...)
Line 31: Line 31:
* eduroam in Tampere, Finland
* eduroam in Tampere, Finland
* LANGATON-WPA in Tampere, Finland
* LANGATON-WPA in Tampere, Finland
 +
 +
[[Category:Connectivity]]
 +
[[Category:WiFi]]

Revision as of 12:39, 30 November 2009

PEAP + MSCHAPv2 WiFi Authentication, eduroam

Some educational sites using eduroam support this method, some use EAP-TTLS+PAP which does not work. PEAP + MSCHAPv2 is quite popular authentication method which is supported by the tablets, but some setup is needed. Therefore, bad out of the box experience is guaranteed. If you're uncertain, try if step-by-step guide below works. If it doesn't - bummer.

(This example is for Eduroam for N900. Same works for 770, N800 and N810 too)

Go Applications -> Settings -> Internet connections
[Connections]
[New]
[Next]
Connection name: eduroam
[Next]
Scan .. Wi-Fi ..
[Yes]
EAP type: PEAP
[Next]
EAP method: EAP MSCHAPv2
[Next]
User name: (username@domain)
password: (your password)
[Next]
[Advanced]
[EAP]
Use manual user name: [x]
Manual user name: (username@domain)
[Save]
[Finnish]

Known working networks:

  • eduroam in Tampere, Finland
  • LANGATON-WPA in Tampere, Finland