Editing Packaging a Qt application

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

= Packaging a Qt application for Maemo=

Packaging a Qt application for Maemo is very similar to packaging any other application, so this document only contains information on Qt-specific packaging issues.

== Creating a Maemo package from a qmake project ==

In order to create a new package for Maemo, from a qmake project, you will need to:
* Rename the source directory to <code>Package-Version</code> (for example myapp-0.1 for an application ‘myapp’ with a version of ‘0.1’)
* Create a ‘src’ directory in <code>Package-Version/</code>
* Copy all the files to the <code>src/</code> directory
* Rename <code>src/appname.pro</code> to <code>src/src.pro</code>
Please make sure that the directory name is <package-version> format and in small case letters.

<pre>
$mv myapp myapp-0.1
$cd myapp-0.1
$mkdir src
$cp * src
$mv src/appname.pro src/src.pro
</pre>

Append the following chunk to end of your <code>src/src.pro</code>. The chunk adds an install section to your qmakefile

<pre>
unix {
  #VARIABLES
  isEmpty(PREFIX) {
    PREFIX = /usr
  }
  BINDIR = $$PREFIX/bin
  DATADIR =$$PREFIX/share

DEFINES += DATADIR=\\\"$$DATADIR\\\" PKGDATADIR=\\\"$$PKGDATADIR\\\"

#MAKE INSTALL

INSTALLS += target desktop service iconxpm icon26 icon48 icon64

target.path =$$BINDIR

desktop.path = $$DATADIR/applications/hildon
  desktop.files += $${TARGET}.desktop

service.path = $$DATADIR/dbus-1/services
  service.files += $${TARGET}.service

icon64.path = $$DATADIR/icons/hicolor/64x64/apps
  icon64.files += ../data/64x64/$${TARGET}.png
}
</pre>

*Create a <code>myapp-0.1/myapp.pro</code> file like this:
<pre>
QMAKEVERSION = $$[QMAKE_VERSION]
ISQT4 = $$find(QMAKEVERSION, ^[2-9])
isEmpty( ISQT4 ) {
error("Use the qmake include with Qt4.4 or greater, on Debian that is qmake-qt4");
}

TEMPLATE = subdirs
SUBDIRS  = src
</pre>
*Run dh_make to debianize the source archive, it creates:
**An archive with the unchanged upstream source (orig.tar.gz)
**Some basic files in the debian directory
**Some example files (*.EX *.ex)
<pre>
export DEBFULLNAME="maintainer first name and last name"
dh_make --createorig --single -e maintainer@email.org -c gpl
</pre>

== Editing the rules file ==
The rules file generated by <code>dh_make</code>, found in <code>debian/rules</code> will be modified in order to look like this one. We are using qmake, so there is no <code>configure</code> script to run. If you copy and paste the following file, notice the empty space at the beginning of the lines these are TAB characters, they are not multiple space characters. If you copy and paste the following chunk, you most propably get space's instead of tabs if this is true then the file will not work.

<pre>
#!/usr/bin/make -f
APPNAME := my_app_name
builddir:
        mkdir -p builddir

builddir/Makefile: builddir
        cd builddir && qmake-qt4 PREFIX=/usr ../$(APPNAME).pro

build: build-stamp

build-stamp: builddir/Makefile
        dh_testdir
        # Add here commands to compile the package.
        cd builddir && $(MAKE)
        touch $@

clean:
        dh_testdir
        dh_testroot
        rm -f build-stamp
        # Add here commands to clean up after the build process.
        rm -rf builddir
        dh_clean
install: build
        dh_testdir
        dh_testroot
        dh_clean -k
        dh_installdirs

# Add here commands to install the package into debian/your_appname
        cd builddir && $(MAKE) INSTALL_ROOT=$(CURDIR)/debian/$(APPNAME) install
# Build architecture-independent files here.
binary-indep: build install
# We have nothing to do by default.

# Build architecture-dependent files here.
binary-arch: build install
        dh_testdir
        dh_testroot
        dh_installdocs
        dh_installexamples
        dh_installman
        dh_link
        dh_strip --dbg-package=my-application-dbg
        dh_compress
        dh_fixperms
        dh_installdeb
        dh_shlibdeps
        dh_gencontrol
        dh_md5sums
        dh_builddeb

binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install configure
</pre>

== Editing the control file ==
The control file generated by <code>dh_make</code>, found in <code>debian/control</code> will be modified substantially. Please refer to the general packaging guide for Maemo for details.

For Qt applications you need to make sure to add <code>libqt4-dev</code> as an additional entry in the field <code>Build-Depends</code>.

= Example =
You can download the [http://maemo.org/packages/view/qt-maemo-example/ source package of qt-maemo-example] from the [[extras-devel]] repository as follows, if you have source packages enabled in your <code>/etc/apt/sources.list</code> file:

apt-get source qt-maemo-example

This command will download the:

* unmodified source (.orig.tar.gz)
* debian dsc file (.dsc)
* diff file (.diff)

and will then automatically launch <code>dpkg -x file.dsc</code> in order to decompress the orig.tar.gz and apply the changes.

= Useful Links =

* [[Packaging Qt Creator Apps for Maemo Extras]]
* [[Qt-Maemo|Qt for Maemo]]
* [[Packaging|Packaging guide for Maemo]]
* [http://doc.qt.nokia.com/qt-maemo-4.6/maemo5-with-qt-introduction.html#deploying-your-applications Deploying your Maemo 5 Qt application] Qt documentation

[[Category:Packaging]]
[[Category:Qt]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Main (view source) (protected)

Retrieved from "https://wiki.maemo.org/Packaging_a_Qt_application"

Personal tools

Navigation

Views

Editing Packaging a Qt application

@@ Line 1: / Line 1: @@
+= Packaging a Qt application for Maemo=
 {{main|Packaging}}
@@ Line 136: / Line 138: @@
 For Qt applications you need to make sure to add <code>libqt4-dev</code> as an additional entry in the field <code>Build-Depends</code>.
-== Example ==
+= Example =
 You can download the [http://maemo.org/packages/view/qt-maemo-example/ source package of qt-maemo-example] from the [[extras-devel]] repository as follows, if you have source packages enabled in your <code>/etc/apt/sources.list</code> file:
@@ Line 149: / Line 151: @@
 and will then automatically launch <code>dpkg -x file.dsc</code> in order to decompress the orig.tar.gz and apply the changes.
-== Useful Links ==
+= Useful Links =
 * [[Packaging Qt Creator Apps for Maemo Extras]]