Editing Phone control

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
-
{{ambox
 
-
| type = notice
 
-
| image=
 
-
| text = '''This page is about controlling your Nokia device.  For historical reasons this page is called '''phone''' control even though it really covers more than just the phone functions.'''
 
-
}}
 
-
 
-
 
{{Recommended phone usage}}
{{Recommended phone usage}}
-
==D-Bus==
+
=D-Bus=
-
These D-Bus commands can be run from terminal or as shell scripts. Useful for scheduling events with [[alarmed]] or [[fcron]], executing from [[Desktop Command Execution Widget scripts|Desktop Command Execution Widget]] or [[Queen BeeCon Widget]], startup events, install scripts, etc. They should be run as:
+
These D-Bus commands can be run from terminal or as shell scripts. Useful for scheduling events with fcron, executing from Desktop Command Execution Widget, startup events, install scripts, etc. They should be run as:
  run-standalone.sh SCRIPT.sh
  run-standalone.sh SCRIPT.sh
Line 19: Line 12:
Also note that most commands don't need "--print-reply" option. Those that don't need it should be '''tested without it''' and this page should be edited.
Also note that most commands don't need "--print-reply" option. Those that don't need it should be '''tested without it''' and this page should be edited.
-
===Phone===
 
-
====Open Phone application====
+
==Phone==
 +
 
 +
===Open Phone application===
  dbus-send --type=method_call --dest=com.nokia.HildonDesktop.AppMgr /com/nokia/HildonDesktop/AppMgr com.nokia.HildonDesktop.AppMgr.LaunchApplication string:"rtcom-call-ui"
  dbus-send --type=method_call --dest=com.nokia.HildonDesktop.AppMgr /com/nokia/HildonDesktop/AppMgr com.nokia.HildonDesktop.AppMgr.LaunchApplication string:"rtcom-call-ui"
-
====Make a phone call====
+
 
 +
===Make a phone call===
  dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.Call /com/nokia/csd/call com.nokia.csd.Call.CreateWith string:"$NUMBER" uint32:0
  dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.Call /com/nokia/csd/call com.nokia.csd.Call.CreateWith string:"$NUMBER" uint32:0
Line 31: Line 26:
Change $NUMBER to phone number you want to call.
Change $NUMBER to phone number you want to call.
-
====End current phone call====
 
-
dbus-send --system --print-reply --dest=com.nokia.csd.Call /com/nokia/csd/call com.nokia.csd.Call.Release
+
===End current phone call===
-
This will release/end/hangup/reject the current call (or possibly all calls if more then one call is active) or do nothing if no calls are active.
+
dbus-send --system --dest=com.nokia.csd.Call --print-reply /com/nokia/csd/call com.nokia.csd.Call.Release
-
====Answer current phone call====
+
This will release/end/hangup/reject the current call (or possibly all calls if more then one call is active - needs testing to verify behavior when more then 1 call active) or do nothing if no calls are active.
-
dbus-send --system --print-reply --dest=com.nokia.csd.Call /com/nokia/csd/call/1 com.nokia.csd.Call.Instance.Answer
 
-
This will answer/pickup the current (first) call.  
+
===Get [http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity IMEI]===
-
If you answer the call immediately as you receive the Call Coming D-Bus message the phone seems to be in a specific call state where answering yields a <code>com.nokia.csd.Call.Error.NotAllowed</code> exception.
+
dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM/security Phone.Sim.Security.get_imei
-
You need to answer the call after a delay of e.g. 1 s.
 
-
Another (probably better) approach is to register to the CallStatus D-Bus message (<code>com.nokia.csd.Call</code>, <code>/com/nokia/csd/call/1</code>, <code>com.nokia.csd.Call.Instance.CallStatus</code>) and wait for a call status >= 2 (=<code>CSD_CALL_STATUS_COMING</code>) after the "Coming" message.
+
===Get [http://en.wikipedia.org/wiki/International_Mobile_Subscriber_Identity IMSI]===
-
====Call "starhash code"====
+
dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM Phone.Sim.get_imsi
-
For example '''*100#'''.
+
===Get phone registration status===
-
dbus-send --system --type=method_call --dest=com.nokia.CallUI /com/nokia/CallUI com.nokia.CallUI.HandleMMICode string:"*100#"
+
 +
dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_registration_status
-
====Activate call forwarding====
 
-
 
-
Forward '''all ('unconditional') calls''' to e.g. +12223456789
+
===Turn loudspeaker on===
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''0''' string:"+12223456789" uint32:
+
-
or
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''1''' string:"+12223456789" uint32:
+
-
----
+
dbus-send --type=method_call --dest=com.nokia.osso_hp_ls_controller /com/nokia/osso_hp_ls_controller com.nokia.osso_hp_ls_controller.loudspeaker.force_loudspeaker_off
-
Forward '''calls when 'busy'''' to e.g. +12223456789
 
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''2''' string:"+12223456789" uint32:
 
-
----
+
===Turn loudspeaker off===
-
 
+
-
Forward '''unanswered calls''' to e.g. +12223456789 (leaving the last uint32: empty will use the last stored waiting time)
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''3''' string:"+12223456789" uint32:
+
-
 
+
-
Forward '''unanswered calls, when 'no answer' after 25 sec''' to e.g. +12223456789 (if you want to set this value explicitly; valid values: 5, 10, 15, 20, 25, 30)
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''3''' string:"+12223456789" uint32:'''25'''
+
-
 
+
-
----
+
-
 
+
-
Forward '''calls when you are 'out of reach' (no network, shut off, ...)''' to e.g. +12223456789
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''4''' string:"+12223456789" uint32:
+
-
 
+
-
----
+
-
 
+
-
Forward '''calls when 'not available' (busy, no answer, out of reach)''' to e.g. +12223456789
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS /com/nokia/csd/ss com.nokia.csd.SS.DivertActivate uint32:'''5''' string:"+12223456789" uint32:
+
-
 
+
-
--[[User:peterleinchen|peterleinchen]] 23:00, 15 December 2011 (UTC)
+
-
 
+
-
many thanks to the pre-contributor (I have searched for a long time to have the possibility to switch forwarding script based)
+
-
 
+
-
====Cancel call forwarding====
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.SS
+
-
/com/nokia/csd/ss com.nokia.csd.SS.DivertCancel uint32:'''x''' string: uint32:
+
-
Valid values for "x", pls see also above.
+
-
0 unconditional
+
-
 
+
-
1 unconditional
+
-
 
+
-
2 busy
+
-
 
+
-
3 no answer (after xx sec)
+
-
 
+
-
4 out of reach
+
-
 
+
-
5 not available (busy, no answer, out of reach)
+
-
 
+
-
--[[User:peterleinchen|peterleinchen]] 23:00, 15 December 2011 (UTC)
+
-
 
+
-
 
+
-
====Get [[:wikipedia:International_Mobile_Equipment_Identity|IMEI]]====
+
-
 
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM/security Phone.Sim.Security.get_imei|awk -F "\"" '/g/ {print $2}'
+
-
 
+
-
====Get [[:wikipedia:International_Mobile_Subscriber_Identity|IMSI]]====
+
-
 
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM Phone.Sim.get_imsi|awk -F "\"" '/g/ {print $2}'
+
-
 
+
-
====Get [[:wikipedia:Subscriber_identity_module#ICCID|ICCID]]====
+
-
 
+
-
dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.get_iccid|awk -F "\"" '/g/ {print $2}'
+
-
 
+
-
====Get SIM status====
+
-
 
+
-
dbus-send --system --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM Phone.Sim.get_sim_status
+
-
 
+
-
====Get cellular signal strength====
+
-
 
+
-
dbus-send --system --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_signal_strength
+
-
 
+
-
First line is percentage, second is dBm, third unknown.
+
-
 
+
-
====Get cellular registration status====
+
-
 
+
-
dbus-send --system --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_registration_status
+
-
 
+
-
====Turn loudspeaker on====
+
  dbus-send --type=method_call --dest=com.nokia.osso_hp_ls_controller /com/nokia/osso_hp_ls_controller com.nokia.osso_hp_ls_controller.loudspeaker.force_loudspeaker_on
  dbus-send --type=method_call --dest=com.nokia.osso_hp_ls_controller /com/nokia/osso_hp_ls_controller com.nokia.osso_hp_ls_controller.loudspeaker.force_loudspeaker_on
-
(These loudspeaker ones don't work on my N900. If I add --print-reply I get "Error org.freedesktop.DBus.Error.ServiceUnknown: The name com.nokia.osso_hp_ls_controller was not provided by any .service files".)
 
-
====Turn loudspeaker off====
+
==Profiles==
-
dbus-send --type=method_call --dest=com.nokia.osso_hp_ls_controller /com/nokia/osso_hp_ls_controller com.nokia.osso_hp_ls_controller.loudspeaker.force_loudspeaker_off
+
===General===
-
====Turn loudspeaker on (N900)====
+
dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_profile string:"general"
-
dbus-send --type=method_call --dest=org.maemo.Playback.Manager /org/maemo/Playback/Manager org.maemo.Playback.Manager.RequestPrivacyOverride boolean:true
 
-
====Turn loudspeaker off (N900)====
+
===Silent===
-
dbus-send --type=method_call --dest=org.maemo.Playback.Manager /org/maemo/Playback/Manager org.maemo.Playback.Manager.RequestPrivacyOverride boolean:false
+
-
 
+
-
====Turn mute on (N900)====
+
-
 
+
-
dbus-send --type=method_call --dest=org.maemo.Playback.Manager /org/maemo/Playback/Manager org.maemo.Playback.Manager.RequestMute boolean:true
+
-
 
+
-
====Turn mute off (N900)====
+
-
dbus-send --type=method_call --dest=org.maemo.Playback.Manager /org/maemo/Playback/Manager org.maemo.Playback.Manager.RequestMute boolean:false
+
-
 
+
-
====Turn bluetooth override on (N900)====
+
-
 
+
-
dbus-send --type=method_call --dest=org.maemo.Playback.Manager /org/maemo/Playback/Manager org.maemo.Playback.Manager.RequestBluetoothOverride boolean:true
+
-
 
+
-
====Turn bluetooth override off (N900)====
+
-
dbus-send --type=method_call --dest=org.maemo.Playback.Manager /org/maemo/Playback/Manager org.maemo.Playback.Manager.RequestBluetoothOverride boolean:false
+
-
 
+
-
====Start Vibrating Incoming Call====
+
-
 
+
-
dbus-send --system --print-reply --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_vibrator_pattern_activate string:PatternIncomingCall
+
-
 
+
-
PatternXXX according to definition in /etc/mce/mce.ini
+
-
 
+
-
====Stop Vibrating Incoming Call====
+
-
 
+
-
dbus-send --system --print-reply --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_vibrator_pattern_deactivate string:PatternIncomingCall
+
-
 
+
-
====Vibration Single Shot====
+
-
dbus-send --system --print-reply --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_start_manual_vibration int32:255 int32:1000
+
-
 
+
-
First int is power, second is duration in milliseconds
+
-
 
+
-
===Profiles===
+
-
 
+
-
====Set General====
+
-
 
+
-
dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_profile string:"general"
+
-
 
+
-
====Set Silent====
+
  dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_profile string:"silent"
  dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_profile string:"silent"
 +
==LED==
-
====Query current profile====
+
===Activate LEDs===
-
  dbus-send --type=method_call --print-reply --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.get_profile
+
  dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_led_pattern_activate string:"PatternCommunicationIM"
-
====List all profiles====
 
-
dbus-send --type=method_call --print-reply --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.get_profiles|awk -F "\"" '/g/ {print $2}'
+
===Deactivate LEDs===
-
 
+
-
====Get all profile Values====
+
-
 
+
-
You can modify any profile value, eg. clock alarm enabled, im alert volume, keypad sound level, touchscreen sound level, ... To find out which keys exist, to what value they are set and what values can be given you can use the following command. (For the profile "silent" just put "silent" at the end instead of "general".)
+
-
 
+
-
dbus-send --type=method_call --print-reply --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.get_values string:"general"
+
-
 
+
-
The returned value is an array of struct. Each struct has 3 strings: key, value, type. Type can be eg. "INTEGER 0-2" saying that the values 0, 1 and 2 are correct values for this key.
+
-
 
+
-
====Set a profile value====
+
-
 
+
-
To modify the above mentioned profile values you need this method. The method takes three parameters, all strings: profile, key and value. Profile can be "general" or "silent", key is one of the keys from the above (get all profile values), value can be set to anything allowed by "type" from the above method.
+
-
 
+
-
To enable vibrating alert for the profile "general" your script would look like this:
+
-
 
+
-
dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_value string:"general" string:"vibrating.alert.enabled" string:"On"
+
-
 
+
-
===LED===
+
-
 
+
-
====Activate LEDs====
+
-
 
+
-
dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_led_pattern_activate string:"PatternCommunicationIM"
+
-
 
+
-
====Deactivate LEDs====
+
  dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_led_pattern_deactivate string:"PatternCommunicationIM"
  dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_led_pattern_deactivate string:"PatternCommunicationIM"
-
====Set brightness of backlight LEDs====
 
-
dbus-send --print-reply --system --dest=org.freedesktop.Hal /org/freedesktop/Hal/devices/computer_backlight org.freedesktop.Hal.Device.LaptopPanel.SetBrightness int32:$brightness
+
==Messaging==
-
(where $brightness is 0...255)
+
===New e-mail===
-
===Messaging===
+
dbus-send --type=method_call --dest=com.nokia.modest /com/nokia/modest com.nokia.modest.MailTo string:"mailto:"
-
====New e-mail====
 
-
dbus-send --type=method_call --dest=com.nokia.modest /com/nokia/modest com.nokia.modest.MailTo string:"mailto:"
+
===Send and receive e-mail===
-
====Send and receive e-mail====
+
It works, but it takes looong time (up to minute and a half) via GPRS (2.5, 3 or 3.5). Network and/or speed is not the problem, it just takes long via GPRS. It is much faster via Wi-Fi.
-
 
+
-
It works, but it takes up to 2 minutes for modest to start refreshing and after that it depends on the speed of the connection how fast it is going to be completed, usually up to 5 seconds, 2G can be a bit slower.
+
  dbus-send --type=method_call --dest=com.nokia.modest /com/nokia/modest com.nokia.modest.SendReceive
  dbus-send --type=method_call --dest=com.nokia.modest /com/nokia/modest com.nokia.modest.SendReceive
-
====Set presence====
+
 
 +
===Set presence===
  dbus-send --type=method_call --print-reply --dest=org.freedesktop.Telepathy.MissionControl /org/freedesktop/Telepathy/MissionControl org.freedesktop.Telepathy.MissionControl.SetPresence uint32:2 string:"I'm here"
  dbus-send --type=method_call --print-reply --dest=org.freedesktop.Telepathy.MissionControl /org/freedesktop/Telepathy/MissionControl org.freedesktop.Telepathy.MissionControl.SetPresence uint32:2 string:"I'm here"
-
Note: This method does not work in Maemo 5. Workaround: http://talk.maemo.org/showthread.php?t=55686
 
-
 
-
====Change peak_schedule settings====
 
-
 
-
Check:
 
-
run-standalone.sh gconftool-2 -R /apps/activesync
 
-
 
-
Set (check if yours is named ActiveSyncAccount1):
 
-
run-standalone.sh gconftool-2 --set /apps/activesync/ActiveSyncAccount1/schedule/peak_schedule --type=int 15
 
-
Where the last number is one of the following (as standard in GUI):
 
-
* '''0''' = Always on
+
==Media player==
-
* '''-1''' = Manual
+
-
* '''15''' = Every 15 minutes
+
-
* '''30''' = Every 30 minutes
+
-
* '''60''' = Every hour
+
-
* '''240''' = Every 4 hours
+
-
* '''720''' = Every 12 hours
+
-
===Media player===
+
===Open file in media player===
-
====Open file in media player====
+
dbus-send --dest=com.nokia.mediaplayer /com/nokia/mediaplayer com.nokia.mediaplayer.mime_open string:"file:///$1"
-
dbus-send --print-reply --dest=com.nokia.mediaplayer /com/nokia/mediaplayer com.nokia.mediaplayer.mime_open string:"file:///$1"
 
-
====Pause what's currently playing====
+
===Pause what's currently playing===
  dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.pause
  dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.pause
-
====Stop what's currently playing====
 
-
dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.stop
+
==Notifications==
-
====Play what's currently selected====
+
===Send notification (orange one line popup)===
-
 
+
-
dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.play
+
-
 
+
-
====Unpause what's currently selected====
+
-
 
+
-
dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.resume
+
-
 
+
-
====Play next mediafile====
+
-
 
+
-
dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.next
+
-
 
+
-
====Play previous mediafile====
+
-
 
+
-
dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.previous
+
-
 
+
-
===Notifications===
+
-
 
+
-
====Send notification (orange one line popup)====
+
  dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:"NOTIFICATION"
  dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:"NOTIFICATION"
-
====Send notification (orange multiple line popup)====
 
-
dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:"NOTE line 1
+
===Send dialog notification (orange multi line popup requiring user interaction)===
-
line 2
+
-
. . .
+
-
line n"
+
-
--[[User:peterleinchen|peterleinchen]] 00:22, 4 January 2012 (UTC)
+
-
 
+
-
====Send dialog notification (orange multi line popup, requiring user interaction)====
+
  dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteDialog string:"QUESTION?" uint32:0 string:"OK"
  dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteDialog string:"QUESTION?" uint32:0 string:"OK"
Line 319: Line 127:
Not sure what string "OK" does, but it is needed and can be anything.
Not sure what string "OK" does, but it is needed and can be anything.
-
It does nothing here and is not explicitly needed, pls. see below command and also section.
 
-
dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteDialog string:"QUESTION?" uint32: string:
 
-
====Send dialog notification (black/white with floating bar and confirmation button, requiring user action)====
+
==Securing==
-
dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteDialog string:"QUESTION?" uint32:'''4''' string:"OK"
+
===Lock===
-
 
+
-
String "OK" is the text for the button.
+
-
--[[User:peterleinchen|peterleinchen]] 21:29, 3 January 2012 (UTC)
+
-
 
+
-
====Send email/SMS style notification====
+
-
see http://wiki.maemo.org/Phone_control#Make_an_.22Email_Style.22_notification_dialog
+
-
 
+
-
===Securing===
+
-
 
+
-
====Security Device Lock (with lockcode)====
+
  dbus-send --system --type=method_call --dest=com.nokia.system_ui /com/nokia/system_ui/request com.nokia.system_ui.request.devlock_open string:"com.nokia.mce" string:"/com/nokia/mce/request" string:"com.nokia.mce.request" string:"devlock_callback" uint32:'3'
  dbus-send --system --type=method_call --dest=com.nokia.system_ui /com/nokia/system_ui/request com.nokia.system_ui.request.devlock_open string:"com.nokia.mce" string:"/com/nokia/mce/request" string:"com.nokia.mce.request" string:"devlock_callback" uint32:'3'
-
The next method is a 2nd - surprisingly shorter - way to enter device lock mode. Its benefit is that it even disables the device power button menu:
 
-
dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.devlock_callback int32:0
+
===Unlock===
-
 
+
-
====Unlock (pop up lockcode requester?)====
+
  dbus-send --system --type=method_call --dest=com.nokia.system_ui /com/nokia/system_ui/request com.nokia.system_ui.request.devlock_close string:"com.nokia.mce" string:"/com/nokia/mce/request" string:"com.nokia.mce.request" string:"devlock_callback" uint32:'0'
  dbus-send --system --type=method_call --dest=com.nokia.system_ui /com/nokia/system_ui/request com.nokia.system_ui.request.devlock_close string:"com.nokia.mce" string:"/com/nokia/mce/request" string:"com.nokia.mce.request" string:"devlock_callback" uint32:'0'
-
Next method is a 2nd, more direct way to stop device lock mode.
 
-
dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.devlock_callback int32:2
+
===Lock screen and keys===
-
====Query Devlock State====
+
dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:"locked"
-
  dbus-send --system --type=method_call --dest="com.nokia.mce" --print-reply "/com/nokia/mce/request" com.nokia.mce.request.get_devicelock_mode |awk -F "\"" '/g/ {print $2}'
 
-
 
-
 
-
====Lock screen and keys (slider lockswitch)====
 
-
 
-
dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:"locked"
 
-
====Unlock screen and keys====
+
===Unlock screen and keys===
-
This command will unlock and illuminate the screen (useful when accessing the phone externally through [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY])
 
  dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:"unlocked"
  dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:"unlocked"
-
====Query lock state of screen and keys====
 
-
Will return ''locked'' or ''unlocked'' depending on lock state
+
==Networking==
-
dbus-send --system --type=method_call --dest="com.nokia.mce" --print-reply "/com/nokia/mce/request" com.nokia.mce.request.get_tklock_mode|awk -F "\"" '/g/ {print $2}'
+
-
===Networking===
+
===Connect to specific saved connection===
-
 
+
-
====Enable ICD log====
+
-
There are two methods to enable ICD logs
+
-
 
+
-
1. Print to the syslog:
+
-
  (1)Use the following cmd
+
-
  (2)$ syslogd
+
-
  (3)$ icd2 –l0
+
-
  (4)The log will print to the /var/log/syslog
+
-
2. Print to the standard output 
+
-
  (1)Get the source code of icd2
+
-
  (2)Add the begging of source code of “support/osso-log.h” "#define OSSOLOG_STDOUT"
+
-
  (3)$ icd2 –l0
+
-
  (4)The log will print to the standard output
+
-
 
+
-
====Connect to specific saved connection====
+
  dbus-send --system --type=method_call --dest=com.nokia.icd /com/nokia/icd com.nokia.icd.connect string:"IAP_ID" uint32:0
  dbus-send --system --type=method_call --dest=com.nokia.icd /com/nokia/icd com.nokia.icd.connect string:"IAP_ID" uint32:0
Line 398: Line 165:
Keep in mind that phone has to be disconnected in order to connect via this call.
Keep in mind that phone has to be disconnected in order to connect via this call.
-
If not, an error message will occur if you add --print-reply to the dbus-send command.
 
-
====Connect to any saved connection====
 
-
dbus-send --system --type=method_call --dest=com.nokia.icd /com/nokia/icd com.nokia.icd.connect string:"[ANY]" uint32:0
+
===Disconnect internet===
-
 
+
-
====Disconnect internet====
+
-
 
+
-
=====ICD2=====
+
-
 
+
-
dbus-send --print-reply --system --dest=com.nokia.icd2 /com/nokia/icd2 com.nokia.icd2.disconnect_req uint32:0x8000
+
-
 
+
-
=====ICD=====
+
  dbus-send --system --dest=com.nokia.icd /com/nokia/icd_ui com.nokia.icd_ui.disconnect boolean:true
  dbus-send --system --dest=com.nokia.icd /com/nokia/icd_ui com.nokia.icd_ui.disconnect boolean:true
-
On [[Maemo 5/PR1.2|PR1.2]] :
 
-
Error org.freedesktop.DBus.Error.UnknownMethod: Method "disconnect" with signature "b" on interface "com.nokia.icd_ui" doesn't exist
 
-
====Connect (show change connection UI)====
+
===Connect (show change connection UI)===
  dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_ui.show_conn_dlg boolean:false
  dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_ui.show_conn_dlg boolean:false
-
If "boolean:true" at the end, one-line notification saying "No saved connections available" appears. Maybe affects more than that? Most likely, boolean:true leads to using saved connections if there are any, and boolean:false forces to display the connection dialog.
+
If "boolean:true" at the end, one-line notification saying "No saved connections available" appears. Maybe affects more than that?
 +
 
-
====Enable cellular radio====
+
===Enable cellular radio===
  dbus-send --system --type=method_call --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.set_radio boolean:true
  dbus-send --system --type=method_call --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.set_radio boolean:true
-
====Disable cellular radio====
+
 
 +
===Disable cellular radio===
  dbus-send --system --type=method_call --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.set_radio boolean:false
  dbus-send --system --type=method_call --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.set_radio boolean:false
-
====Change device mode====
 
-
String possibility "offline","flight","normal"
+
==Radio mode==
-
dbus-send --system --dest=com.nokia.mce --type=method_call /com/nokia/mce/request com.nokia.mce.request.req_device_mode_change string:offline
+
===2G===
-
====Query device mode====
+
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:1
-
dbus-send --system --dest=com.nokia.mce --type=method_call --print-reply /com/nokia/mce/request com.nokia.mce.request.get_device_mode | awk -F "\"" '/g/ {print $2}'
 
-
===Radio mode===
+
===3G===
-
====Current Mode====
+
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:2
-
dbus-send --system --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_radio_access_technology
 
-
 
-
====2G====
 
-
 
-
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:1
 
-
 
-
====3G====
 
-
 
-
dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:2
 
-
====Dual====
+
===Dual===
  dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:0
  dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:0
-
===Bluetooth===
 
-
====Identify adapter path====
+
==Bluetooth (NOT WORKING)==
-
You need to know adapter path in order to send D-Bus call to the right place. You can get it with entering this command into the terminal:
+
These two calls do not work yet. Reply is: ''Method "SetProperty" with signature "sv" on interface "org.bluez.Adapter" doesn't exist.''
-
dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.ListAdapters | awk -F'"' '/at/ {print $2}'
 
-
or
 
-
dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.DefaultAdapter | awk -F'"' '/at/ {print $2}'
 
-
====Identify Properties====
+
===Enable===
-
  dbus-send --system --print-reply --type=method_call --dest=org.bluez $(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.DefaultAdapter | awk -F'"' '/at/ {print $2}') org.bluez.Adapter.GetProperties
+
  dbus-send --system --type=method_call --print-reply --dest=org.bluez /org/bluez/889/hci0 org.bluez.Adapter.SetProperty string:Powered variant:boolean:true
-
====Enable====
 
-
Using the adapter path value returned with first command, for example ''/org/bluez/906/hci0''.
+
===Disable===
-
  dbus-send --system --type=method_call --dest=org.bluez /org/bluez/906/hci0 org.bluez.Adapter.SetProperty string:Powered variant:boolean:true
+
  dbus-send --system --type=method_call --print-reply --dest=org.bluez /org/bluez/889/hci0 org.bluez.Adapter.SetProperty string:Powered variant:boolean:false
-
This one automatically inserts adapter path:
 
-
dbus-send --system --type=method_call --dest=org.bluez $(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.DefaultAdapter | awk -F'"' '/at/ {print $2}') org.bluez.Adapter.SetProperty string:Powered variant:boolean:true
+
==Open link in browser==
-
 
+
-
====Disable====
+
-
 
+
-
dbus-send --system --type=method_call --dest=org.bluez /org/bluez/906/hci0 org.bluez.Adapter.SetProperty string:Powered variant:boolean:false
+
-
 
+
-
With auto-discovery of adapter path:
+
-
 
+
-
dbus-send --system --type=method_call --dest=org.bluez $(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.DefaultAdapter | awk -F'"' '/at/ {print $2}') org.bluez.Adapter.SetProperty string:Powered variant:boolean:false
+
-
 
+
-
====Connect to specific device====
+
-
 
+
-
devmac=00:11:22:33:44:55
+
-
service=AudioSink
+
-
+
-
adapter=$(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.DefaultAdapter | awk -F'"' '/at/ {print $2}')
+
-
device=$(dbus-send --system --print-reply --dest=org.bluez ${adapter} org.bluez.Adapter.FindDevice string:${devmac} | awk -F'"' '/at/ {print $2}')
+
-
dbus-send --system --type=method_call --print-reply --dest=org.bluez ${device} org.bluez.${service}.Connect
+
-
 
+
-
Change the AudioSink to any service and the devmac to the MAC of bluetooth device.
+
-
 
+
-
===Check for updates===
+
-
 
+
-
dbus-send --type=method_call --dest=com.nokia.hildon_application_manager /com/nokia/hildon_application_manager com.nokia.hildon_application_manager.check_for_updates
+
-
 
+
-
===Open link in browser===
+
  dbus-send --system --type=method_call --dest=com.nokia.osso_browser /com/nokia/osso_browser/request com.nokia.osso_browser.load_url string:"google.com"
  dbus-send --system --type=method_call --dest=com.nokia.osso_browser /com/nokia/osso_browser/request com.nokia.osso_browser.load_url string:"google.com"
-
===Open a pdf file with the default pdf reader application===
 
-
dbus-send --print-reply --dest=com.nokia.osso_pdfviewer /com/nokia/osso_pdfviewer com.nokia.osso_pdfviewer.mime_open string:/home/user/MyDocs/.documents/file_name.pdf
+
==Reboot==
-
 
+
-
===Open a file with the default notes application===
+
-
 
+
-
dbus-send --print-reply --dest=com.nokia.osso_notes /com/nokia/osso_notes com.nokia.osso_notes.mime_open string:/home/user/MyDocs/.documents/file_name
+
-
 
+
-
===Open the default notes application===
+
-
 
+
-
dbus-send --print-reply --dest=com.nokia.osso_notes /com/nokia/osso_notes com.nokia.osso_notes.top_application
+
-
 
+
-
=== Open folder ===
+
-
 
+
-
dbus-send --print-reply --dest=com.nokia.osso_filemanager /com/nokia/osso_filemanager com.nokia.osso_filemanager.open_folder string:/home/user/MyDocs/
+
-
 
+
-
===Set volume===
+
-
 
+
-
dbus-send --type=method_call --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.extension.set_extension_property string:volume variant:uint32:50
+
-
 
+
-
The value can be between 0 and 100.
+
-
 
+
-
===Get volume===
+
-
 
+
-
dbus-send --print-reply --type=method_call --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.extension.get_extension_property string:volume|awk '/nt/ {print $3}'
+
-
 
+
-
===Reboot===
+
  dbus-send --system --type=method_call --print-reply --dest=com.nokia.mce "/com/nokia/mce/request" com.nokia.mce.request.req_reboot
  dbus-send --system --type=method_call --print-reply --dest=com.nokia.mce "/com/nokia/mce/request" com.nokia.mce.request.req_reboot
This is same as rebooting from power key menu (needs uncommenting in certain XML file to appear) and has been identified as insecure way to reboot the device (no filesystem synchronization, etc.). Better command is to simply enter "reboot" in root terminal.
This is same as rebooting from power key menu (needs uncommenting in certain XML file to appear) and has been identified as insecure way to reboot the device (no filesystem synchronization, etc.). Better command is to simply enter "reboot" in root terminal.
-
Yet another method: dsmetool -b
 
-
===Shutdown===
+
==Shutdown==
  dbus-send --system --type=method_call --print-reply --dest=com.nokia.mce "/com/nokia/mce/request" com.nokia.mce.request.req_shutdown
  dbus-send --system --type=method_call --print-reply --dest=com.nokia.mce "/com/nokia/mce/request" com.nokia.mce.request.req_shutdown
-
See warning at reboot D-Bus call (needs testing).
+
See warning at reboot dbus call (needs testing).
-
===Show dashboard===
+
 
 +
==Show dashboard==
  dbus-send /com/nokia/hildon_desktop com.nokia.hildon_desktop.exit_app_view
  dbus-send /com/nokia/hildon_desktop com.nokia.hildon_desktop.exit_app_view
-
===Other===
 
-
====D-Bus Scripts====
+
==Other==
 +
 
 +
===D-Bus Scripts===
You can also use [[DbusScripts|dbus-scripts]] to execute any command when various actions are triggered on D-Bus.
You can also use [[DbusScripts|dbus-scripts]] to execute any command when various actions are triggered on D-Bus.
-
====Panucci (pause)====
 
-
dbus-send --type=method_call --dest=org.panucci.panucciInterface /panucciInterface org.panucci.panucciInterface.playPause
+
===Panucci (pause)===
-
====Device Orientation====
+
dbus-send --type=method_call --dest=org.panucci.panucciInterface /panucciInterface org.panucci.panucciInterface.playPause
-
dbus-send --system --print-reply --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.get_device_orientation
 
-
==GConf==
+
=GConf=
===Reset GPRS data counter===
===Reset GPRS data counter===
-
The commands are PR1.2 compliant and do not work on previous versions.
+
gconftool-2 -u /system/osso/connectivity/network_type/GPRS/gprs_rx_bytes
 +
gconftool-2 -u /system/osso/connectivity/network_type/GPRS/gprs_tx_bytes
 +
gconftool-2 -s /system/osso/connectivity/network_type/GPRS/gprs_reset_time --type=string $(date +%s)
-
gconftool-2 -u /system/osso/connectivity/network_type/GPRS/gprs_home_rx_bytes
 
-
gconftool-2 -u /system/osso/connectivity/network_type/GPRS/gprs_home_tx_bytes
 
-
gconftool-2 -s /system/osso/connectivity/network_type/GPRS/gprs_home_reset_time --type=string $(date +%s)
 
-
==Command line==
+
=Command line=
===Enable FM Transmitter===
===Enable FM Transmitter===
  /usr/bin/fmtx_client -p 1
  /usr/bin/fmtx_client -p 1
 +
===Disable FM Transmitter===
===Disable FM Transmitter===
Line 586: Line 275:
  /usr/bin/fmtx_client -p 0
  /usr/bin/fmtx_client -p 0
-
==GStreamer==
 
-
===Take a picture with front camera===
+
=GStreamer=
-
 
+
-
gst-launch v4l2src device=/dev/video1 num-buffers=1 ! ffmpegcolorspace ! jpegenc ! filesink location=frontcam.jpg
+
===Shoot photo after 10 seconds===
===Shoot photo after 10 seconds===
-
The camera application must be off for it to work. And of course the camera shutter must be open...gst-launch comes with gstreamer-tools (or gst-launch-0.10 and gstreamer0.10-tools)
+
The camera application must be off for it to work. And of course the camera shutter must be open...
-
  /bin/sleep 10 ; /usr/bin/gst-launch v4l2camsrc device=/dev/video0 num-buffers=1 \! video/x-raw-yuv,width=2592,height=1968  \! ffmpegcolorspace \! jpegenc \! filesink location=/home/user/MyDocs/DCIM/photo.jpg
+
  /bin/sleep 10 ; /usr/bin/gst-launch v4l2camsrc device=/dev/video0 num-buffers=1 \! video/x-raw-yuv,width=2592,height=1968  \!  ffmpegcolorspace \! jpegenc \! filesink location=/home/user/MyDocs/DCIM/photo.jpg
-
 
+
-
To shoot from the front camera, change '''/dev/video0''' to '''/dev/video1''' and the proper resolution:
+
-
 
+
-
  /bin/sleep 10 ; /usr/bin/gst-launch v4l2camsrc device=/dev/video1 num-buffers=1 \! video/x-raw-yuv,width=640,height=480  \! ffmpegcolorspace \! jpegenc \! filesink location=/home/user/MyDocs/DCIM/photo.jpg
+
Other way:
Other way:
Line 606: Line 288:
  /bin/sleep 10; /usr/bin/gst-launch v4l2camsrc ! ffmpegcolorspace ! jpegenc ! identity error-after=1 ! filesink location=/home/user/MyDocs/DCIM/photo.jpg
  /bin/sleep 10; /usr/bin/gst-launch v4l2camsrc ! ffmpegcolorspace ! jpegenc ! identity error-after=1 ! filesink location=/home/user/MyDocs/DCIM/photo.jpg
-
==Python==
 
-
===Make a phone call via the cellular network===
+
=Python=
-
<source lang="python">
+
===Make a phone call===
-
import dbus
+
-
def place_call(number):
+
-
  bus = dbus.SystemBus()
+
-
  csd_call = dbus.Interface(bus.get_object('com.nokia.csd',
+
-
                                          '/com/nokia/csd/call'),
+
-
                                          'com.nokia.csd.Call')
+
-
  csd_call.CreateWith(str(number), dbus.UInt32(0))
+
-
</source>
+
-
=== Make a phone call via SIP ===
+
  import dbus
-
<source lang="python">
+
  def place_call(number):
-
#!/usr/bin/python
+
    bus = dbus.SystemBus()
 +
    csd_call = dbus.Interface(bus.get_object('com.nokia.csd',
 +
                                            '/com/nokia/csd/call'),
 +
                                            'com.nokia.csd.Call')
 +
    csd_call.CreateWith(str(number), dbus.UInt32(0))
-
import dbus
 
-
import sys
 
-
 
-
# Get the target phone number (or SIP address) from the command line
 
-
TARGET = sys.argv[1];
 
-
 
-
# Configure the telepathy path to the SofiaSIP account that we wish to use.
 
-
# Use "mc-tool list" (from the libmissioncontrol-utils package) to see your accounts.
 
-
SIP_ACCOUNT = 'sofiasip/sip/_31234567_40sipgate_2eco_2euk0'
 
-
 
-
# This gets us a connnection to the session bus
 
-
bus = dbus.SessionBus()
 
-
 
-
# This sets up a path to the SIP account within telepathy.
 
-
PATH = '/org/freedesktop/Telepathy/Account/'
 
-
PATH += SIP_ACCOUNT
 
-
 
-
# This sets up a proxy object as a "handle" to the AccountManager of our target account
 
-
account = bus.get_object('org.freedesktop.Telepathy.AccountManager', PATH)
 
-
 
-
# This launches the actual SIP call with a method call to EnsureChannel on that object
 
-
account.EnsureChannel( \
 
-
        dbus.Dictionary({
 
-
                dbus.String(u'org.freedesktop.Telepathy.Channel.TargetHandleType'): dbus.UInt32(1),
 
-
                dbus.String(u'org.freedesktop.Telepathy.Channel.ChannelType'): dbus.String(u'org.freedesktop.Telepathy.Channel.Type.StreamedMedia'),
 
-
                dbus.String(u'org.freedesktop.Telepathy.Channel.TargetID'): dbus.String(TARGET),
 
-
        }, signature='sv'),
 
-
        dbus.UInt64(0),
 
-
        dbus.String(''),
 
-
        dbus_interface='com.nokia.Account.Interface.ChannelRequests')
 
-
 
-
sys.exit(0)
 
-
 
-
</source>
 
-
 
-
===Send SMS===
 
-
 
-
ssms.py using new QtMobility bindings by ossipena:
 
-
 
-
<source lang="python">
 
-
#!/usr/bin/env python
 
-
# -*- coding: utf-8 -*-
 
-
 
-
#ssms Ossipena/TimoP
 
-
#send smses from command line
 
-
#licence : Do whatever you want
 
-
#deps:
 
-
#pyside-qt4
 
-
#pyside-mobility
 
-
 
-
'''imports'''
 
-
from QtMobility.Messaging import *
 
-
from PySide.QtCore import *
 
-
import sys
 
-
from PyQt4 import QtCore
 
-
 
-
 
-
app = QCoreApplication(sys.argv)
 
-
 
-
'''get number and name'''
 
-
stringit = sys.argv
 
-
numpertemp = str(stringit[1:2])
 
-
mesits = str(stringit[2:])[2:-2]
 
-
 
-
num = str(numpertemp[2:-2])
 
-
 
-
if (mesits == ""):
 
-
  print "Usage:"
 
-
  print "python ssms.py 01234567 'message text here'"
 
-
  sys.exit(69)
 
-
else:
 
-
  print "number is " + str(num)
 
-
  print "message is " + str(mesits)
 
-
 
-
'''define message to be sent'''
 
-
numperi = QtCore.QString(num)
 
-
 
-
numper = QMessageAddress(QMessageAddress.Phone, numperi)
 
-
mesitsi = QMessage()
 
-
mesitsi.setType(QMessage.Sms)
 
-
mesitsi.setTo(numper)
 
-
mesitsi.setBody(mesits)
 
-
 
-
'''send message'''
 
-
sender = QMessageService()
 
-
if (sender.send(mesitsi)):
 
-
  print "success"
 
-
else:
 
-
  print "fail"
 
-
</source>
 
-
 
-
From:
 
-
http://talk.maemo.org/showpost.php?p=548948&postcount=52
 
-
 
-
<source lang="python">
 
-
#!/usr/bin/env python2.5
 
-
 
-
import pexpect
 
-
import time
 
-
from subprocess import *
 
-
 
-
child = pexpect.spawn('pnatd');
 
-
child.send('at\r');
 
-
time.sleep(0.25);
 
-
child.send('at+cmgf=1\r');
 
-
time.sleep(0.25);
 
-
child.send('at+cmgs="+XXXXXXX"\r');
 
-
child.send('SMSTEXTSMSTEXTSMSTEXT');
 
-
child.send(chr(26));
 
-
child.send(chr(26));
 
-
child.sendeof();
 
-
</source>
 
-
 
-
There's also a python script that uses D-Bus instead from http://talk.maemo.org/showpost.php?p=558430&postcount=57:
 
-
 
-
<source lang="python">
 
-
#!/usr/bin/env python2.5         
 
-
import sched, time               
 
-
import dbus                     
 
-
import gobject                   
 
-
from dbus.mainloop.glib import DBusGMainLoop
 
-
 
-
def octify(str):
 
-
        '''   
 
-
        Returns a list of octet bytes representing
 
-
        each char of the input str.             
 
-
        '''                                     
 
-
 
-
        bytes = map(ord, str)
 
-
        bitsconsumed = 0   
 
-
        referencebit = 7   
 
-
        octets = []         
 
-
 
-
        while len(bytes):
 
-
                byte = bytes.pop(0)
 
-
                byte = byte >> bitsconsumed
 
-
                                         
 
-
                try:                     
 
-
                        nextbyte = bytes[0]
 
-
                        bitstocopy = (nextbyte & (0xff >> referencebit)) << referencebit
 
-
                        octet = (byte | bitstocopy)                                   
 
-
 
-
                except:
 
-
                        octet = (byte | 0x00)
 
-
 
-
                if bitsconsumed != 7:
 
-
                        octets.append(byte | bitstocopy)
 
-
                        bitsconsumed += 1             
 
-
                        referencebit -= 1             
 
-
                else:                                 
 
-
                        bitsconsumed = 0               
 
-
                        referencebit = 7               
 
-
 
-
        return octets
 
-
 
-
def semi_octify(str):
 
-
        '''         
 
-
        Expects a string containing two digits.
 
-
        Returns an octet -                   
 
-
        first nibble in the octect is the first
 
-
        digit and the second nibble represents
 
-
        the second digit.                     
 
-
        '''                                   
 
-
        try:                                 
 
-
                digit_1 = int(str[0])         
 
-
                digit_2 = int(str[1])         
 
-
                octet = (digit_2 << 4) | digit_1
 
-
        except:                               
 
-
                octet = (1 << 4) | digit_1     
 
-
 
-
        return octet
 
-
 
-
 
-
def deoctify(arr):
 
-
 
-
        referencebit = 1
 
-
        doctect = []   
 
-
        bnext = 0x00   
 
-
 
-
        for i in arr:
 
-
 
-
                bcurr = ((i & (0xff >> referencebit)) << referencebit) >> 1
 
-
                bcurr = bcurr | bnext                                     
 
-
 
-
                if referencebit != 7:
 
-
                        doctect.append( bcurr )
 
-
                        bnext = (i & (0xff << (8 - referencebit)) ) >> 8 - referencebit
 
-
                        referencebit += 1                                             
 
-
                else:                                                                 
 
-
                        doctect.append( bcurr )                                       
 
-
                        bnext = (i & (0xff << (8 - referencebit)) ) >> 8 - referencebit
 
-
                        doctect.append( bnext )                                       
 
-
                        bnext = 0x00                                                 
 
-
                        referencebit = 1                                             
 
-
 
-
        return ''.join([chr(i) for i in doctect])
 
-
 
-
 
-
def createPDUmessage(number, msg):
 
-
        '''                     
 
-
        Returns a list of bytes to represent a valid PDU message
 
-
        '''                                                   
 
-
        numlength = len(number)                               
 
-
        if (numlength % 2) == 0:                               
 
-
                rangelength = numlength                       
 
-
        else:                                                 
 
-
                number = number + 'F'                         
 
-
                rangelength = len(number)                     
 
-
 
-
        octifiednumber = [ semi_octify(number[i:i+2]) for i in range(0,rangelength,2) ]
 
-
        octifiedmsg = octify(msg)                                                     
 
-
        HEADER = 1                                                                   
 
-
        FIRSTOCTETOFSMSDELIVERMSG = 10                                               
 
-
        ADDR_TYPE = 129 #unknown format                                               
 
-
        number_length = len(number)                                                   
 
-
        msg_length = len(msg)                                                         
 
-
        pdu_message = [HEADER, FIRSTOCTETOFSMSDELIVERMSG, number_length, ADDR_TYPE]   
 
-
        pdu_message.extend(octifiednumber)                                           
 
-
        pdu_message.append(0)                                                         
 
-
        pdu_message.append(0)                                                         
 
-
        pdu_message.append(msg_length)                                               
 
-
        pdu_message.extend(octifiedmsg)                                               
 
-
        return pdu_message                                                           
 
-
 
-
 
-
def sendmessage(number, message):
 
-
 
-
        bus = dbus.SystemBus()
 
-
        smsobject = bus.get_object('com.nokia.phone.SMS', '/com/nokia/phone/SMS/ba212ae1')
 
-
        smsiface = dbus.Interface(smsobject, 'com.nokia.csd.SMS.Outgoing')
 
-
        arr = dbus.Array(createPDUmessage(number.replace('+', '00'), message))
 
-
 
-
        msg = dbus.Array([arr])
 
-
        smsiface.Send(msg,'')
 
-
 
-
 
-
def callback(pdumsg, msgcenter, somestring, sendernumber):
 
-
 
-
        msglength = int(pdumsg[18])
 
-
        msgarray = pdumsg[19:len(pdumsg)]
 
-
 
-
        msg = deoctify(msgarray)
 
-
 
-
        if msg > 0:
 
-
              print 'New message received from %s' % sendernumber
 
-
              print 'Message length %d' % msglength
 
-
              print 'Message: %s' % msg
 
-
 
-
              if msg == "ping":
 
-
                      print "Sending reply: pong"
 
-
                      sendmessage(sendernumber.replace("+","00"), "pong")
 
-
              else:
 
-
                      print "Unknown command"
 
-
 
-
 
-
def listen():
 
-
        DBusGMainLoop(set_as_default=True)
 
-
        bus = dbus.SystemBus() #should connect to system bus instead of session because the former is where the incoming signals come from
 
-
        bus.add_signal_receiver(callback, path='/com/nokia/phone/SMS', dbus_interface='Phone.SMS', signal_name='IncomingSegment')
 
-
        gobject.MainLoop().run()
 
-
 
-
 
-
if __name__ == '__main__':
 
-
  import time
 
-
 
 
-
  def schedule_task(schedule, fn, *args):
 
-
      import sched
 
-
      s = sched.scheduler(time.time, time.sleep)
 
-
      startTime = time.mktime(time.strptime(schedule, '%b %d %H:%M %Y'))
 
-
      s.enterabs(startTime, 0, fn, args)
 
-
      s.run()
 
-
 
-
  import getopt, sys
 
-
  try: 
 
-
    opts, args = getopt.getopt(sys.argv[1:],"hlt:", ["help","listen","time="])
 
-
 
-
  except getopt.GetoptError, err:
 
-
    # print help information and exit:
 
-
    print str(err) # will print something like "option -a not recognized"
 
-
    usage()
 
-
    sys.exit(2) 
 
-
  listening = False
 
-
  timeofday = ''
 
-
  for opt, arg in opts:
 
-
    if opt in ("-h", "--help"):
 
-
      usage()                   
 
-
      sys.exit()                 
 
-
    elif opt in ("-l", "--listen"):
 
-
      listening = True               
 
-
    elif opt in ("-t", "--time"):
 
-
      timeofday = arg                         
 
-
    else:
 
-
      assert False, "unhandled option"
 
-
 
 
-
  number = args[0]         
 
-
  msg = args[1]
 
-
  if msg != '':
 
-
    if timeofday == '':
 
-
        sendmessage(number, msg)
 
-
    else:
 
-
        today = time.strftime('%b %d x %Y', time.localtime())
 
-
        schedule = today.replace('x', timeofday)
 
-
        schedule_task(schedule, sendmessage, number, msg)
 
-
  if listening:
 
-
    listen()
 
-
</source>
 
===Send dialog notification (orange multi line popup requiring user interaction)===
===Send dialog notification (orange multi line popup requiring user interaction)===
-
<source lang="python">
+
  import dbus
-
import dbus
+
  def show_notification_dialog(message, mode="single"):
-
def show_notification_dialog(message, mode="single"):
+
    bus = dbus.SystemBus()
-
  bus = dbus.SystemBus()
+
    iface = dbus.Interface(bus.get_object('org.freedesktop.Notifications',
-
  iface = dbus.Interface(bus.get_object('org.freedesktop.Notifications',
+
                                          '/org/freedesktop/Notifications'),
-
                                        '/org/freedesktop/Notifications'),
+
                                          'org.freedesktop.Notifications')
-
                                        'org.freedesktop.Notifications')
+
    if mode == "single":
-
  if mode == "single":
+
        iface.SystemNoteInfoprint(message)
-
      iface.SystemNoteInfoprint(message)
+
    elif mode == "multiline":
-
  elif mode == "multiline":
+
        iface.SystemNoteDialog(str(message), dbus.UInt32(0), 'Ok')
-
      iface.SystemNoteDialog(str(message), dbus.UInt32(0), 'Ok')
+
-
</source>
+
-
 
+
-
This function allows you to show notification either with multiline (on Maemo pre-5 it will show a dialog with an "Ok" button) or single line (tiny notifications hiding automatically).
+
-
 
+
-
===Take a screenshot===
+
-
 
+
-
<source lang="python">
+
-
import gtk.gdk
+
-
 
+
-
w = gtk.gdk.get_default_root_window()
+
-
sz = w.get_size()
+
-
print "The size of the window is %d x %d" % sz
+
-
pb = gtk.gdk.Pixbuf(gtk.gdk.COLORSPACE_RGB,False,8,sz[0],sz[1])
+
-
pb = pb.get_from_drawable(w,w.get_colormap(),0,0,0,0,sz[0],sz[1])
+
-
if (pb != None):
+
-
  pb.save("screenshot.png","png")
+
-
  print "Screenshot saved to screenshot.png."
+
-
else:
+
-
  print "Unable to get the screenshot."
+
-
</source>
+
-
 
+
-
Credits: took code from [http://stackoverflow.com/questions/69645/take-a-screenshot-via-a-python-script-linux here].
+
-
 
+
-
 
+
-
There is also a way using PyQt:
+
-
<source lang="python">
+
-
import sys
+
-
import time
+
-
from PyQt4.QtGui import QPixmap, QApplication
+
-
app = QApplication(sys.argv)
+
-
file = "/home/user/MyDocs/.images/Screenshots/Screenshot-"+time.strftime("%Y%m%d")+"-"+time.strftime("%H%M%S")+".png"
+
-
QPixmap.grabWindow(QApplication.desktop().winId()).save(file, 'png')
+
-
</source>
+
-
 
+
-
===Make an "Email Style" notification dialog===
+
-
 
+
-
<source lang="python">
+
-
import dbus
+
-
 
+
-
bus = dbus.SessionBus()
+
-
proxy = bus.get_object('org.freedesktop.Notifications', '/org/freedesktop/Notifications')
+
-
interface = dbus.Interface(proxy,dbus_interface='org.freedesktop.Notifications')
+
-
interface.Notify('Notification', 0, 'control_bluetooth_paired', 'Testing 123', 'Hello World', [], {}, 0)
+
-
</source>
+
-
 
+
-
Credits: MohammadAG (on irc).
+
-
 
+
-
Additional note by Linkandzelda (on irc):
+
-
The type "control_bluetooth_paired" is the name of the icon used, picked from this folder
+
-
<source lang="bash">
+
This function allows you to show notification either with multiline (on maemo pre-5 it will show a dialog with an "Ok" button) or single line (tiny notifications hiding automatically).
-
/usr/share/icons/hicolor/48x48/hildon
+
-
</source>
+
[[Category:Power users]]
[[Category:Power users]]
[[Category:Development]]
[[Category:Development]]

Learn more about Contributing to the wiki.


Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!


Cancel | Editing help (opens in new window)

Templates used on this page:

Retrieved from "https://wiki.maemo.org/Phone_control"