Editing PyMaemo/Scratchboxless packaging guide

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

== Introduction ==

The usual way of developing Maemo applications is using either Scratchbox or [[MADDE]], which are quite heavy for Python development. An alternative is using [http://github.com/astraw/stdeb stdeb], a set of extensions to distutils that allows generating Debian packages, both binary and source, that can be installed on the device or sent to the [[extras-devel]] repository.

This tutorial will show how to integrate it into your project, build the packages and upload them to extras-devel.

== Prerequisites ==

This tutorial is aimed at Debian-based systems, as some stdeb commands requires the dpkg tools installed.

Also, you should get the [http://github.com/astraw/stdeb git] version of stdeb to use the debianize command, as it is a new addition and not yet available in the repositories. Run the following commands to install it:

# Clone the git repository
 git clone http://github.com/astraw/stdeb.git

# Enter source package
 cd stdeb

# Build .deb (making use of stdeb package directory in sys.path).
 python setup.py --command-packages=stdeb.command bdist_deb

# Install it
 sudo dpkg -i deb_dist/python-stdeb_0.5.1+git-1_all.deb

As only python2.5 is supported in pymaemo, it should be installed if you want to create binary packages. On Ubuntu Lucid (10.04), you can install it from [https://launchpad.net/~fkrull/+archive/deadsnakes this ppa], following the instructions [http://www.codigomanso.com/en/2010/05/google-app-engine-en--10-4-lucid-lynx/ here].

== Preparing the package ==

As stdeb extends distutils, it is necessary that you have a working setup.py script. For our example application, which consists of a [http://pymaemo.garage.maemo.org/stdeb_example/myscript-app/myscript single script] named "myscript" and support files like [http://pymaemo.garage.maemo.org/stdeb_example/myscript-app/myscript.desktop .desktop]<ref name="desktop">[[Desktop file format]]</ref> and an [http://pymaemo.garage.maemo.org/stdeb_example/myscript-app/myscript.png icon]<ref name="icon">[[Packaging#Displaying an icon in the Application Manager next to your package]]</ref>, the [http://pymaemo.garage.maemo.org/stdeb_example/myscript-app/setup.py setup.py] will look like this:
<source lang="python">
from distutils.core import setup

setup(
    name='myscript',
    version='0.1',
    author='Lauro Moura',
    author_email='lauro.neto@donotspamme.com',
    scripts=['myscript'],
    data_files=[('share/applications/hildon', ['myscript.desktop']),
                ('share/pixmaps', ['myscript.png'])],
)
</source>
A file named [http://pymaemo.garage.maemo.org/stdeb_example/myscript-app/stdeb.cfg stdeb.cfg] in the same directory as setup.py is required, with stdeb Maemo-specific options. A detailed list of options can be found in the [http://github.com/astraw/stdeb stdeb website].

[DEFAULT]
 XS-Python-Version: 2.5 # Only version currently supported by PyMaemo.
 Package:my-script # Binary package name. stdeb adds the prefix "python-" by default
 Section: user/development # Section should start with user/ to appear in the menu.
 Depends: python-gtk2 # extra dependencies go here

<b>Warning 1</b>: Make sure to use [[Maemo_packaging#Sections|an allowed section]].

<b>Warning 2</b>: The <code>Depends</code> field in stdeb.cfg will be used on your debian/control file, so fill it correctly with all the dependencies of your application - otherwise it will break when you try to install it. For instance, [http://gitorious.org/twcano/twcano twcano] depends on the following packages: <code>python-simplejson, pyside-qt4-maemo5, pyside-qt4-webkit and python-twitter</code>, so the <code>Depends</code> field should be filled this way:

Depends: python-simplejson, pyside-qt4-maemo5, pyside-qt4-webkit, python-twitter

== Building the packages ==

The basic command is

python setup.py --command-packages=stdeb.command bdist_deb

It'll create a folder called deb_dist with the source and binary packages. Alternatively, the "sdist_dsc" command will create only the source package.

After generating, you can copy the package to your device and install it (requires an [[SSH]] server):

$ scp myscript_0.1-1_all.deb root@<n900 ip>:/root
 $ ssh root@<n900 ip>
 # dpkg -i myscript_0.1-1_all.deb

== Building a basic debian directory ==

Another useful command is ''debianize''. It will read the configuration file and write a directory named debian in the same directory. This can be used for manually creating the packages using dpkg tools directly. For a detailed usage example see the [http://github.com/astraw/stdeb#debianize-distutils-command steb website].

Note: sdist_dsc and bdist_deb do '''not''' use this directory, generating a new one in the source dir under deb_dist/.

== Uploading to extras ==

To upload to extras, use the debianize command and then call dpkg-buildpackage:

$ dpkg-buildpackage -rfakeroot -uc -us -S

This command will create the .dsc, .tar.gz and .changes files that can be used to [[uploading to Extras-devel|upload the application to extras-devel]].

== Future work ==

Support for non-Debian systems.

== References ==

[[Category:Python]]
[[Category:Packaging]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Ambox (view source) (semi-protected)

Retrieved from "https://wiki.maemo.org/PyMaemo/Scratchboxless_packaging_guide"

Personal tools

Navigation

Views

Editing PyMaemo/Scratchboxless packaging guide

@@ Line 7: / Line 7: @@
 == Prerequisites ==
-This tutorial is aimed at Debian-based systems, as some stdeb commands requires the dpkg tools installed. If you're using another distro, please refer to the section
+This tutorial is aimed at Debian-based systems, as some stdeb commands requires the dpkg tools installed.
 Also, you should get the [http://github.com/astraw/stdeb git] version of stdeb to use the debianize command, as it is a new addition and not yet available in the repositories. Run the following commands to install it:
@@ Line 13: / Line 13: @@
   # Clone the git repository
   git clone http://github.com/astraw/stdeb.git
   # Enter source package
   cd stdeb
   # Build .deb (making use of stdeb package directory in sys.path).
   python setup.py --command-packages=stdeb.command bdist_deb
   # Install it
   sudo dpkg -i deb_dist/python-stdeb_0.5.1+git-1_all.deb
@@ Line 71: / Line 71: @@
 == Building a basic debian directory ==
-Another useful command is ''debianize''. It will read the configuration file and write a directory named debian in the same directory. This can be used for manually creating the packages using dpkg tools directly. For a detailed usage example see the [http://github.com/astraw/stdeb#debianize-distutils-command stdeb website].
+Another useful command is ''debianize''. It will read the configuration file and write a directory named debian in the same directory. This can be used for manually creating the packages using dpkg tools directly. For a detailed usage example see the [http://github.com/astraw/stdeb#debianize-distutils-command steb website].
 Note: sdist_dsc and bdist_deb do '''not''' use this directory, generating a new one in the source dir under deb_dist/.
@@ Line 83: / Line 83: @@
 This command will create the .dsc, .tar.gz and .changes files that can be used to [[uploading to Extras-devel|upload the application to extras-devel]].
+== Future work ==
+Support for non-Debian systems.
-== Support for non-Debian systems ==
-{{ambox
-| type = notice
-| image=
-| text = Keep in mind that the support for non-Debian systems is '''experimental''': it is not as funcional as the stdeb approach shown above and may not work for your package. Also, these instructions may change without notice. }}
-If you're using a distro not based on Debian, you can still create source packages for uploading to extras-devel, but won't be able to create binary packages (.deb).
-For doing this, you will need the sdist_deb module available [http://gitorious.org/pymaemo/sboxless here]; just clone it in some directory and point the PYTHONPATH environment variable there.
-Now create a file called sboxless.cfg, which will contain additional information for generating the package. For now, you can add additional runtime dependencies for your package. If you want to add python-twitter as dependency, just write
- [control]
- depends=python-twitter
-The file is mandatory, so if you don't want to add any dependency, just leave the field empty ('depends=').
-Now, run the sdist_deb command:
- PYTHONPATH=/path/to/sboxless python setup.py --command-packages=sboxless  sdist_deb
-The source files will be generated on the ./dist directory.
 == References ==