Editing Python/Harmattan/Performance Considerations for Python Apps

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

Based on [http://talk.maemo.org/showthread.php?t=50737&highlight=fmms Making Python faster (for fmms initially)] and [http://talk.maemo.org/showthread.php?t=47850 Python Qt startup time tips]

See the [http://wiki.python.org/moin/PythonSpeed/PerformanceTips python.org page] and [http://talk.maemo.org/showpost.php?p=623199&postcount=18 Khertan's writeup] for general Python optimizations.

== Profiling ==

Do not worry about performance unless you notice a problem. Then only optimize what you can justify with profiling.

To profile Python code, run it with
 $ python -m cProfile -o .profile TOPLEVEL_SCRIPT.py
To then analyze the results
 $ python -m pstats .profile
 > sort cumulative
 > stats 40

That sorted the results by the time it took for a function and all the functions it called.  It then displays the top 40 results.

See the [http://docs.python.org/library/profile.html python.org page] for more information on profiling

== Improving Performance ==

=== Interpreter Choice ===

==== Unladen Swallow ====

[http://www.python.org/dev/peps/pep-3146/ PEP 3146 - Merging of Unladen Swallow]

Currently Unladen Swallow has not seen too much performance benefit but has a longer start up time and takes more memory

==== Psyco / Cython ====

Compiles a restricted subset of python into a Python extension model

Do these work with Arm?

==== ShedSkin ====
ShedSkin is a tool to convert a restricted subset of python into C++.
This then can get compiled and used as a module in python.
Tests have shown that there are great speed improvements possible.
You dont need any knowledge in C or how to use gcc.
{{main|ShedSkin}}

==== Delegating to C with CTypes/SWIG ====

=== Startup ===

==== /usr/bin/python Startup ====

Preloaders exists like [http://pylauncher.garage.maemo.org/ PyLauncher] that keep a python process around with heavy weight imports like gtk already imported. On application launch it forks the preloader process.

Preloaders were favored back in the Maemo 4.1 days but has fallen out of favor lately. Concerns center around always keeping an unused python process with heavy pieces of code imported always around [http://talk.maemo.org/showpost.php?p=622358&postcount=10].

==== Parsing .py files ====

===== Stripping the Code =====

A major downside is that the code that your users is running is different than the code you develop with. This means any stack traces that users provide will be a bit more complicated to decipher.

Benchmarks from stripping code[http://talk.maemo.org/showpost.php?p=627311&postcount=28]

First test - normal code
 2104 lines of code
 580 blank lines
 215 code lines
 Load time from icon click to fully loaded - 10.04 seconds

Second Test - Cleared up code
 2104 lines of code
 0 blank lines
 80 code lines
 Load time from icon click to fully loaded - 9.25 seconds

Third - Cleared up code!!
 1469 lines of code
 0 blank lines
 80 code lines
 Load time from icon click to fully loaded - 8.40 (5 tests , from 8.09 to 8.60)

===== Generating pyc/pyo files =====

Python serializes its state after importing a file to save on re-parsing.  It saves these next to the .py files which means if the user does not have write access, Python will not be able to cache it.

Generating pyc/pyo files should be done as a package postinst/postrm per Debian Python Policy[http://talk.maemo.org/showpost.php?p=628464&postcount=35]

Approaches:

* <code>py_compilefiles src/*.py</code> [http://talk.maemo.org/showpost.php?p=627477&postcount=31]
* Python-support is even very easy to use, basically just add <code>dh_pysupport</code> to <code>debian/rules</code> and <code>python-support</code> to <code>Build-depends</code> and <code>Depends</code>. Just make sure that <code>postinst</code> has <code>#DEBHELPER#</code> somewhere [http://talk.maemo.org/showpost.php?p=634286&postcount=52]
* <code>python -m compileall TOPLEVEL.py</code> [http://talk.maemo.org/showpost.php?p=644005&postcount=60]

===== pyo Files =====

A decent description of pyo files [http://www.network-theory.co.uk/docs/pytut/CompiledPythonfiles.html]
* When the Python interpreter is invoked with the <code>-O</code> flag, optimized code is generated and stored in ‘<code>.pyo</code>’ files. The optimizer currently doesn't help much; it only removes assert statements. When <code>-O</code> is used, all bytecode is optimized; <code>.pyc</code> files are ignored and <code>.py</code> files are compiled to optimized bytecode.
* Passing two <code>-O</code> flags to the Python interpreter (<code>-OO</code>) will cause the bytecode compiler to perform optimizations that could in some rare cases result in malfunctioning programs. Currently only <code>__doc__</code> strings are removed from the bytecode, resulting in more compact ‘<code>.pyo</code>’ files. Since some programs may rely on having these available, you should only use this option if you know what you're doing.
* A program doesn't run any faster when it is read from a ‘<code>.pyc</code>’ or ‘<code>.pyo</code>’ file than when it is read from a ‘<code>.py</code>’ file; the only thing that's faster about ‘<code>.pyc</code>’ or ‘<code>.pyo</code>’ files is the speed with which they are loaded.
* When a script is run by giving its name on the command line, the bytecode for the script is never written to a ‘<code>.pyc</code>’ or ‘<code>.pyo</code>’ file. Thus, the startup time of a script may be reduced by moving most of its code to a module and having a small bootstrap script that imports that module. It is also possible to name a ‘<code>.pyc</code>’ or ‘<code>.pyo</code>’ file directly on the command line.
* The module ‘<code>compileall</code>’{} can create ‘<code>.pyc</code>’ files (or ‘<code>.pyo</code>’ files when <code>-O</code> is used) for all modules in a directory.

==== Delayed work ====

With Dialcentral, epage found that caching off results from a good number of "re.compile" at object creation time (which occurs in a background thread) saved a significant amount on startup.  Even with profiling until the background thread is finished showed a speed up. epage suspects this is due to fewer class variable assignments / queries which might be more expensive then the equivalent on a instance.

Sadly this was done earlier in the Dialcentral release cycle and no performance numbers are available to back up these claims. It was considered significant enough at the time to make the code slightly uglier.

==== Perceived Startup Performance ====

[http://lists.maemo.org/pipermail/maemo-developers/2009-October/021478.html hildon_gtk_window_take_screenshot] takes advantage of user perception to make the user think the app is launched faster.

=== Responsiveness ===

==== Thread per Logical Unit ====

The One Ring has separate threads for its D-Bus logic and its networking logic. It does this separation through a worker thread that the D-Bus thread posts tasks to. Results come as callbacks in the D-Bus thread.

See [https://garage.maemo.org/plugins/ggit/browse.php/?p=theonering;a=blob;f=src/util/go_utils.py;h=20ccac19201a4eae1b019fe2861e120b92010f55;hb=835f22ccd4b8e357bcbbc364d451e98721401e72 AsyncLinearExecutor] and some [https://garage.maemo.org/plugins/ggit/browse.php/?p=theonering;a=blob;f=src/channel/call.py;h=aefc59861a1cede286d4094bf8fc35101f2ff19d;hb=835f22ccd4b8e357bcbbc364d451e98721401e72 example code]

==== Splitting a call between multiple callbacks ====

See [http://talk.maemo.org/showpost.php?p=623199&postcount=18 Khertan's approach]

epage's approach[https://garage.maemo.org/plugins/ggit/browse.php/?p=gc-dialer;a=blob;f=src/gtk_toolbox.py;h=17dc166b5c37c5d15efc6eb7baef52b3250544ac;hb=a0b504bcfb10c73989fbb8578f073e81f4f7edbd]:
 def make_idler(func):
         """
         Decorator that makes a generator-function into a function that will continue execution on next call
         """
         a = []
         @functools.wraps(func)
         def decorated_func(*args, **kwds):
                 if not a:
                         a.append(func(*args, **kwds))
                 try:
                         a[0].next()
                         return True
                 except StopIteration:
                         del a[:]
                         return False
         return decorated_func

Example
 @make_idler
 def func(self):
   ... long code ...
   yield
   ... long code ...
   yield
   ... long code ...
   yield
   ... long code ...
   yield
 ...
 callback = make_idler(func)
 gobject.idle_add(callback)

=== Memory Usage ===

Use of [http://docs.python.org/reference/datamodel.html#slots slots]

== FAQ ==

=== Is Python slow? ===

The standard response of "it depends". For a graphical application not doing too much processing a user will probably not notice it is written in Python. Compare that to an experiment by epage in writing a GST video filter in Python that at best ran at 2 seconds per frame.

== Further reading ==

* [[PyQt Tips and Tricks]] - similar guide for PyQt

[[Category:Python]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Main (view source) (protected)

Retrieved from "https://wiki.maemo.org/Python/Harmattan/Performance_Considerations_for_Python_Apps"

Personal tools

Navigation

Views

Editing Python/Harmattan/Performance Considerations for Python Apps

@@ Line 123: / Line 123: @@
 epage's approach[https://garage.maemo.org/plugins/ggit/browse.php/?p=gc-dialer;a=blob;f=src/gtk_toolbox.py;h=17dc166b5c37c5d15efc6eb7baef52b3250544ac;hb=a0b504bcfb10c73989fbb8578f073e81f4f7edbd]:
-<source lang="python">
   def make_idler(func):
           """
@@ Line 140: / Line 139: @@
                           return False
           return decorated_func
-</source>
 Example
-<source lang="python">
   @make_idler
   def func(self):
@@ Line 157: / Line 154: @@
   callback = make_idler(func)
   gobject.idle_add(callback)
-</source>
 === Memory Usage ===