R&D mode

m
(Cleanup, markup, de-midgard)
Line 1: Line 1:
-
{{midgard_article}}
+
You can enable R&D mode by passing the <code>--enable-rd-mode</code> flag to the [[flasher]].
-
You can enable the R&D mode by passing the "--enable-rd-mode" flag to [[flasher|flasher-3.0]].
+
-
You must use a Linux or a Mac OS X computer to enable R&D Mode - the Windows update wizard will not allow you to enable/disable R&D Mode.  
+
You must use a Linux or a Mac OS X computer to enable R&D Mode, as the Windows update wizard will not allow you to enable/disable R&D Mode. Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already enabled.
-
Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already on.
+
-
== What R&D Mode does ==
+
== What R&D mode does ==
-
*"sudo gainroot" in the console can be used, without installing anything extra, to gain a root shell.
+
*<code>sudo gainroot</code> in the console can be used, without installing anything [[root access|extra]], to gain a root shell.
-
*The power button turns on the tablet with one press, as opposed to the usual behavior where you have to hold the power button for the tablet to power up.
+
*The power button turns on the tablet with a shortpress press as opposed to the longpress normally required.
-
== R&D Mode flags ==
+
== R&D mode flags ==
-
You can enable some R&D mode flags (flasher-3.0 --set-rd-flags=<flag>) for various features:
+
You can enable some R&D mode flags (<code>flasher-3.0 --set-rd-flags=''<flag>''</code>) for various features:
-
*"no-lifeguard-reset" - disables the lifeguard process (lifeguard reboots the device when an important system process crashes)
+
*<code>no-lifeguard-reset</code> - Disables the lifeguard process (lifeguard reboots the device when an important system process crashes).
-
 
+
*<code>serial-console</code> - Enables the serial console (the serial port pins are next to the battery) and causes a shorter battery life.
-
*"serial-console" - enables the serial console (the serial port pins are next to the battery) and causes a shorter battery life.
+
*<code>no-omap-wd</code> - Disables the watchdog on the OMAP processor.
-
 
+
*<code>no-retu-wd</code> - Disables the watchdog on retu.  
-
*"no-omap-wd" - disables the watchdog on the OMAP processor.
+
*<code>no-usb-timeout</code> - Unknown
-
*"no-retu-wd" - disables the watchdog on retu.  
+
-
 
+
-
*"no-usb-timeout" ???
+
[[Category:Users]]
[[Category:Users]]

Revision as of 08:10, 21 April 2009

You can enable R&D mode by passing the --enable-rd-mode flag to the flasher.

You must use a Linux or a Mac OS X computer to enable R&D Mode, as the Windows update wizard will not allow you to enable/disable R&D Mode. Although, the Windows flasher will disable R&D Mode if you use it to reflash a device that has R&D Mode already enabled.

What R&D mode does

  • sudo gainroot in the console can be used, without installing anything extra, to gain a root shell.
  • The power button turns on the tablet with a shortpress press as opposed to the longpress normally required.

R&D mode flags

You can enable some R&D mode flags (flasher-3.0 --set-rd-flags=<flag>) for various features:

  • no-lifeguard-reset - Disables the lifeguard process (lifeguard reboots the device when an important system process crashes).
  • serial-console - Enables the serial console (the serial port pins are next to the battery) and causes a shorter battery life.
  • no-omap-wd - Disables the watchdog on the OMAP processor.
  • no-retu-wd - Disables the watchdog on retu.
  • no-usb-timeout - Unknown