User:Jebba/Mer

(=Add xserver-xorg-input-tslib)
m (Protected "User:Jebba/Mer": Excessive vandalism ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite)))
 
(36 intermediate revisions not shown)
Line 1: Line 1:
=N900 Install=
=N900 Install=
 +
Note, this is still in a *very* rough state. Currently, you can't recharge the battery while using Mer, nor even draw power when plugged in, so developing on it means you have to reboot just to recharge your battery. No phone calls are possible yet. Grabbing binaries of the proprietary crock from Nokia requires rebuilding packages and jumping through hoops. On the positive side, it boots. :)
 +
 +
You can do this without erasing your main install, FYI...
* [[Mer/Documentation/Installation|Mer installation]]
* [[Mer/Documentation/Installation|Mer installation]]
-
* [[Category:Mer| Mer articles]]
+
* [http://mer-project.blogspot.com/2010/01/dual-booting-mer-on-nokia-n900.html More recent blog post about installing Mer 0.17testing10]
 +
 
==Mer Image==
==Mer Image==
The latest release as of this post is 0.17testing4.
The latest release as of this post is 0.17testing4.
 +
 +
'''NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!'''
  # you need an ext3 formated MicroSD card.
  # you need an ext3 formated MicroSD card.
-
  mount -o noatime /dev/mmcblk1p1 /media/mmc1/
+
  mount -o noatime /dev/mmcblk1p3 /media/mmc3/
   
   
  # go hence
  # go hence
-
  cd /media/mmc1/
+
  cd /media/mmc3/
   
   
  wget http://stskeeps.subnetmask.net/mer/0.17testing4/mer-armel-generic-image-v0.17testing4.tar.gz
  wget http://stskeeps.subnetmask.net/mer/0.17testing4/mer-armel-generic-image-v0.17testing4.tar.gz
   
   
-
  # Untar it verbally to see the majick.
+
  # Untar it verbosely to see the majick.
  # Note this will create dirs like ./usr and ./lib etc, so you don't want stuff pre-existing in those dirs.
  # Note this will create dirs like ./usr and ./lib etc, so you don't want stuff pre-existing in those dirs.
  tar zxvf mer-armel-generic-image-v0.17testing4.tar.gz
  tar zxvf mer-armel-generic-image-v0.17testing4.tar.gz
Line 24: Line 30:
==bootmenu==
==bootmenu==
 +
 +
'''NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!'''
 +
You need to have getbootstate version 1.0.35+0m5 or greater for this to work.
You need to have getbootstate version 1.0.35+0m5 or greater for this to work.
  dpkg -l getbootstate
  dpkg -l getbootstate
-
(As a side note, [https://bugs.maemo.org/show_bug.cgi?id=7019 getbootstate is close software]. Please vote for this bug and/or clamour for it to be released as free software.)
+
(As a side note, [https://bugs.maemo.org/show_bug.cgi?id=7019 getbootstate is closed software]. Please vote for this bug and/or clamour for it to be released as free software.)
* [http://talk.maemo.org/showpost.php?p=372885&postcount=22 discussion on t.m.o]
* [http://talk.maemo.org/showpost.php?p=372885&postcount=22 discussion on t.m.o]
Line 45: Line 54:
Now you need to set up Mer in the menu for bootmenu. See also: [[Mer/Documentation/Bootmenu| Mer bootmenu docs]].
Now you need to set up Mer in the menu for bootmenu. See also: [[Mer/Documentation/Bootmenu| Mer bootmenu docs]].
-
I put everything on the first and only partition on an ext3 formatted "external" MicroSD card (the one that's right next to the camera).
+
I put everything on the third partition on an ext3 formatted "external" MicroSD card (the one that's right next to the camera).
  # edit/create this file to create a boot menu item for Mer:
  # edit/create this file to create a boot menu item for Mer:
Line 52: Line 61:
  # Make it look justa lika thisa:
  # Make it look justa lika thisa:
   
   
-
  ITEM_NAME="Mer (external SD, partition 1)"
+
  ITEM_NAME="Mer (external SD, partition 3)"
  ITEM_ID="mer"
  ITEM_ID="mer"
-
  ITEM_DEVICE="${EXT_CARD}p1"
+
  ITEM_DEVICE="${EXT_CARD}p3"
  ITEM_MODULES="mbcache jbd ext3"
  ITEM_MODULES="mbcache jbd ext3"
  ITEM_FSTYPE="ext3"
  ITEM_FSTYPE="ext3"
Line 65: Line 74:
==Disable watchdog==
==Disable watchdog==
 +
You have to disable the watchdog with the flasher tool or the system will just shut down on bootup:
You have to disable the watchdog with the flasher tool or the system will just shut down on bootup:
Line 72: Line 82:
   
   
  ./flasher-3.5 --enable-rd-mode
  ./flasher-3.5 --enable-rd-mode
 +
'''
 +
''If you want to revert back and disbale R%D mode, do:
 +
./flasher-3.5 --disable-rd-mode''
==0.17testing4 fixes for N900==
==0.17testing4 fixes for N900==
 +
 +
'''NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!'''
  # root does all
  # root does all
Line 79: Line 94:
   
   
  # mount up the MicroSD
  # mount up the MicroSD
-
  mount -o noatime /dev/mmcblk1p1 /media/mmc1/
+
  mount -o noatime /dev/mmcblk1p3 /media/mmc3/
   
   
  # go hence
  # go hence
-
  cd /media/mmc1
+
  cd /media/mmc3
   
   
===Missing dir needed at boot===
===Missing dir needed at boot===
Line 92: Line 107:
    
    
  # copy over modules from main OS:
  # copy over modules from main OS:
-
  cp -a /lib/modules/*  /media/mmc1/lib/modules/
+
  cp -a /lib/modules/*  /media/mmc3/lib/modules/
Line 99: Line 114:
====auto-startx====
====auto-startx====
-
To get the touchscreen working you have to edit this file: /media/mmc1/etc/init.d/auto-startx. Patch it ala:
+
To get the touchscreen working you have to edit this file: /media/mmc3/etc/init.d/auto-startx. Patch it ala:
  --- etc/init.d/auto-startx.orig 2009-10-20 12:39:30.000000000 -0300
  --- etc/init.d/auto-startx.orig 2009-10-20 12:39:30.000000000 -0300
Line 111: Line 126:
   else
   else
   echo -n "No user specified for auto login. Creating..."
   echo -n "No user specified for auto login. Creating..."
 +
 +
 +
Note to self: I have a copy of this in /home/user/MyDocs/Mer, so when copying back over be sure to chmod because VFAT loses perms gah:
 +
 +
chmod +x /media/mmc3/etc/init.d/auto-startx
====remove synaptics driver====
====remove synaptics driver====
Line 116: Line 136:
  sudo gainroot
  sudo gainroot
   
   
-
  chroot /media/mmc1 /bin/bash
+
  chroot /media/mmc3 /bin/bash
   
   
  dpkg --remove \
  dpkg --remove \
Line 133: Line 153:
Note sure if it's needed, but:
Note sure if it's needed, but:
-
  chroot /media/mmc1 /bin/bash
+
  chroot /media/mmc3 /bin/bash
  apt-get update
  apt-get update
  apt-get upgrade
  apt-get upgrade
Line 141: Line 161:
The first one sounds helpful.
The first one sounds helpful.
 +
 +
===Set root password===
 +
Might as well set one in the chroot. I had X not come up once, but couldn't log in.
 +
 +
sudo gainroot
 +
chroot /media/mmc3 /bin/bash
 +
passwd
==Misc==
==Misc==
When you are booted up into Fremantle, it wouldn't hurt to fsck your MicroSD too....
When you are booted up into Fremantle, it wouldn't hurt to fsck your MicroSD too....
-
  umount /dev/mmcblk1p1 && fsck.ext3 -vvv /dev/mmcblk1p1
+
  umount /dev/mmcblk1p3 && fsck.ext3 -vvv /dev/mmcblk1p3
 +
 
 +
=Automated install=
 +
Ok, here's dodgy scripts to automatically do lots of the above. I set these up because in the process of doing this I corrupted the filesystem on the MicroSD card enough times that I kept having to do this. If you don't understand what these scripts are doing, don't run them. Ah, and I use sudo lots, so you probably want do add this to /etc/sudoers:
 +
 
 +
user ALL = NOPASSWD: ALL
 +
 
 +
 
 +
 
 +
==freemoe-mer-install==
 +
 
 +
'''NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!'''
 +
 
 +
#!/bin/sh
 +
 +
set -x
 +
 +
echo "this is going to format your microsd, take care!"
 +
 
 +
echo "EARLIER VERSIONS OF THIS SCRIPT USED PARTITION 1"
 +
echo "IT IS NOW USING PARITION 3! BEWARE AND UPDATE YOUR SCRIPT AS NEEDED!"
 +
 +
read ok
 +
read ok
 +
exit 0  # you get this right?
 +
 +
echo
 +
 
 +
sudo umount /dev/mmcblk1p3
 +
 +
sudo mkfs.ext3 -j -m1 /dev/mmcblk1p3
 +
 +
sudo fsck -vvv /dev/mmcblk1p3
 +
 +
sudo mount -o noatime /dev/mmcblk1p3 /media/mmc3/
 +
 +
cd /media/mmc3/
 +
 +
sudo tar zxf /home/user/MyDocs/Mer/mer-armel-generic-image-v0.17testing4.tar.gz
 +
 +
sudo mkdir mnt/initfs
 +
 +
sudo cp -a /lib/modules/*  /media/mmc3/lib/modules/
 +
 +
echo "WARNING WARNING WARNING!!!!"
 +
echo "Copying over NON-FREE FIRMWARE"
 +
echo "PAY PENANCE!!!!"
 +
sudo cp -a /lib/firmware/*  /media/mmc3/lib/firmware/
 +
 +
sudo patch -p0 < /home/user/MyDocs/Mer/auto-startx-n900.patch
 +
 +
# not needed
 +
sudo chmod +x etc/init.d/auto-startx
 +
 +
sudo cp -p /home/user/MyDocs/Mer/mer-setup-in-chroot ./
 +
 +
sudo chmod +x mer-setup-in-chroot
 +
 +
#echo "add . to root's PATH to help with debugging"
 +
#sudo cp -p /home/user/MyDocs/Mer/root-bashrc /media/mmc3/root/.bashrc
 +
 +
#echo "copy over some scripts to help with debug"
 +
#sudo cp -p /home/user/MyDocs/Mer/root/* /media/mmc3/root/
 +
 +
#echo "WARNING: this leaves /root with less-than-optimal perms"
 +
#sudo chmod -R +x /media/mmc3/root/
 +
 +
sudo cp -p /etc/apt/auth /media/mmc3/etc/apt/
 +
 +
sync
 +
 +
echo
 +
echo "now run ./mer-setup-in-chroot after you enter the chroot"
 +
echo "this is convenient too:"
 +
echo "export HOME=/root"
 +
echo
 +
 +
sudo chroot /media/mmc3 /bin/bash
 +
 
 +
==mer-setup-in-chroot==
 +
 
 +
#!/bin/sh
 +
 +
# run this chrooted
 +
 +
set -x
 +
 +
apt-get update
 +
 +
apt-get upgrade
 +
 +
apt-get remove xserver-xorg-input-synaptics xserver-xorg-input-all
 +
 +
apt-get install xserver-xorg-input-tslib
 +
 +
sync
 +
 
 +
==auto-startx-n900.patch==
 +
 
 +
--- etc/init.d/auto-startx.orig 2009-10-20 12:39:30.000000000 -0300
 +
+++ etc/init.d/auto-startx 2009-12-31 13:46:06.000000000 -0300
 +
@@ -8,6 +8,7 @@
 +
  start)
 +
  if [ ! -f /etc/default/autologin ] ; then
 +
  if [ -x /usr/sbin/first-boot-wizard.sh ] ; then
 +
+ TSLIB_TSDEVICE=/dev/input/event3 TSLIB_CONFFILE=/etc/ts.conf ts_calibrate
 +
  /usr/bin/xinit /usr/sbin/first-boot-wizard.sh 2>&1 > /var/log/first-boot-wizard.log
 +
  else
 +
  echo -n "No user specified for auto login. Creating..."
 +
 
 +
=Installing Fremantle Packages=
 +
Mer is missing some key parts, such as charging from battery and making phone calls. The first is killer, the second is a major drawback... Nokia decided to keep these parts proprietary which makes Mer on the N900 pretty pointless actually. Gar.
 +
 
 +
So I thought I would try to install (most begrudgingly) their proprietary Fremantle battery and cell phone applications under Mer. I was able to get the battery applet and some of the hal stuff going, but I don't think it was actually *doing* andything. I then installed the cell phone application, which pretty much screwed up the install.
 +
 
 +
So, in sum, the following doesn't work, but is a possible starting point for getting battery charging working under Mer.
 +
 
 +
I didn't have access to the original .debs, so I decided to just reconstruct them from the ones already installed under fremantle. It's a bit out there, but this is how I did it:
 +
 
 +
# boot into Mer
 +
 +
# We'll use dpkg-repack to rebuild the .debs
 +
apt-get install dpkg-repack
 +
 +
# set up nice working space:
 +
mkdir -p /mnt/fremantle
 +
 +
# umount the read/write of the NAND since we crash all the time and run out of battery
 +
umount /mnt/initfs
 +
 +
# Remount it read-only some place nicer
 +
mount -o ro -t ubifs ubi0:rootfs /mnt/fremantle/
 +
 +
# And put /home and the infamous /opt there too
 +
mount -o ro /dev/mmcblk1p2 /mnt/fremantle/home/
 +
 +
# ...and MyDocs under that
 +
mount -o ro /dev/mmcblk1p1 /mnt/fremantle/home/user/MyDocs/
 +
 +
# Set up stupid symlink for the /opt mess
 +
cd /home
 +
ln -s /mnt/fremantle/home/opt .
 +
 +
# create a nice place to put the .debs we'll create
 +
mkdir /root/REPACKS
 +
 +
# go hence
 +
cd /root/REPACKS
 +
 +
# take a look all those fremantle applications
 +
dpkg -l --root=/mnt/fremantle/
 +
 +
# Repack some random single package
 +
dpkg-repack --root=/mnt/fremantle/ burgerspace
 +
 +
# rebuild the local repo
 +
cd /root/REPACKS
 +
dpkg-scanpackages . /dev/null | gzip -9c > Packages.gz
 +
 +
# Add this to /etc/apt/sources.list and perhaps comment out all the others
 +
deb file:///root/REPACKS ./
 +
 +
# update from our new local repo
 +
apt-get update
 +
 +
# and see that it works
 +
apt-cache search burgerspace
 +
 +
# if that works, you can do them one at a time, or repack all of the
 +
# fremantle debs with this:
 +
for i in `dpkg -l --root=/mnt/fremantle/ |grep ii | cut -f 3 -d " "` ;
 +
do echo $i
 +
dpkg-repack --root=/mnt/fremantle/ $i
 +
done
 +
 +
# Then re-run the archiverthinger
 +
cd /root/REPACKS
 +
dpkg-scanpackages . /dev/null | gzip -9c > Packages.gz
 +
 +
# update
 +
apt-get update
 +
 +
# now install whatever
 +
apt-get install foo
 +
 +
# This will get you a battery applet. It appears in the notification
 +
# area, but I'm not sure if it is working or not. Perhaps try rebooting
 +
# after installing it, and don't install other stuff which may pooch it
 +
apt-get install hald-addon-bme bme-rx-51 status-area-applet-battery
 +
 +
# After I installed this, I had a mess
 +
apt-get install rtcom-call-ui
 +
 
 +
Oh, and I guess I should also point out, that all of this needs to be done because nokia is doing something funky with apt-transport-https. I tried rebuilding theirs and using it under Mer, but it barfed on libraries. I tried using the Ubuntu one but that didn't work with the Nokia repos, even after copying over /etc/apt/auth.
 +
 
 +
Another way to do this would perhaps be to apt-get mirror the repos, if possible or a --download-only type approach. I didn't have apt-transport-https working so I just did this. Time for bed.
=Build Packages=
=Build Packages=

Latest revision as of 00:43, 14 January 2018

Contents

N900 Install

Note, this is still in a *very* rough state. Currently, you can't recharge the battery while using Mer, nor even draw power when plugged in, so developing on it means you have to reboot just to recharge your battery. No phone calls are possible yet. Grabbing binaries of the proprietary crock from Nokia requires rebuilding packages and jumping through hoops. On the positive side, it boots. :)

You can do this without erasing your main install, FYI...


Mer Image

The latest release as of this post is 0.17testing4.

NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!

# you need an ext3 formated MicroSD card.
mount -o noatime /dev/mmcblk1p3 /media/mmc3/

# go hence
cd /media/mmc3/

wget http://stskeeps.subnetmask.net/mer/0.17testing4/mer-armel-generic-image-v0.17testing4.tar.gz

# Untar it verbosely to see the majick.
# Note this will create dirs like ./usr and ./lib etc, so you don't want stuff pre-existing in those dirs.
tar zxvf mer-armel-generic-image-v0.17testing4.tar.gz

# sync and live free!
sync

bootmenu

NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!

You need to have getbootstate version 1.0.35+0m5 or greater for this to work.

dpkg -l getbootstate

(As a side note, getbootstate is closed software. Please vote for this bug and/or clamour for it to be released as free software.)

# Grab this package:
wget http://www.daimi.au.dk/~cvm/bootmenu_1.6_armel.deb

# Be root
sudo gainroot

# Install bootmenu
dpkg -i bootmenu_1.6_armel.deb

Then tappy tap tap the bootmenu install icon and answer yes.

Now you need to set up Mer in the menu for bootmenu. See also: Mer bootmenu docs.

I put everything on the third partition on an ext3 formatted "external" MicroSD card (the one that's right next to the camera).

# edit/create this file to create a boot menu item for Mer:
vim /etc/bootmenu.d/mer.ext.item

# Make it look justa lika thisa:

ITEM_NAME="Mer (external SD, partition 3)"
ITEM_ID="mer"
ITEM_DEVICE="${EXT_CARD}p3"
ITEM_MODULES="mbcache jbd ext3"
ITEM_FSTYPE="ext3"
ITEM_FSOPTIONS="noatime,ro"


(Note: why jbd module needed?)

Then shutoff the phone and reboot with KEYBOARD SLID OUT, so you get the bootmenu.

Disable watchdog

You have to disable the watchdog with the flasher tool or the system will just shut down on bootup:

./flasher-3.5 --set-rd-flags=no-omap-wd

./flasher-3.5 --set-rd-flags=no-ext-wd

./flasher-3.5 --enable-rd-mode

If you want to revert back and disbale R%D mode, do:

./flasher-3.5 --disable-rd-mode

0.17testing4 fixes for N900

NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!

# root does all
sudo gainroot

# mount up the MicroSD
mount -o noatime /dev/mmcblk1p3 /media/mmc3/

# go hence
cd /media/mmc3

Missing dir needed at boot

# create a missing directory
mkdir mnt/initfs


Need modules from kernel

# copy over modules from main OS:
cp -a /lib/modules/*  /media/mmc3/lib/modules/


Fix touchscreen

I STILL DON'T HAVE THIS WORKING.

auto-startx

To get the touchscreen working you have to edit this file: /media/mmc3/etc/init.d/auto-startx. Patch it ala:

--- etc/init.d/auto-startx.orig	2009-10-20 12:39:30.000000000 -0300
+++ etc/init.d/auto-startx	2009-12-31 13:46:06.000000000 -0300
@@ -8,6 +8,7 @@
 start)
 	if [ ! -f /etc/default/autologin ] ; then
 		if [ -x /usr/sbin/first-boot-wizard.sh ] ; then
+			TSLIB_TSDEVICE=/dev/input/event3 TSLIB_CONFFILE=/etc/ts.conf ts_calibrate
 			/usr/bin/xinit /usr/sbin/first-boot-wizard.sh 2>&1 > /var/log/first-boot-wizard.log
 		else
 			echo -n "No user specified for auto login. Creating..."


Note to self: I have a copy of this in /home/user/MyDocs/Mer, so when copying back over be sure to chmod because VFAT loses perms gah:

chmod +x /media/mmc3/etc/init.d/auto-startx

remove synaptics driver

sudo gainroot

chroot /media/mmc3 /bin/bash

dpkg --remove \
xserver-xorg-input-synaptics \
xserver-xorg-input-all

Add xserver-xorg-input-tslib

sudo gainroot

apt-get update

apt-get install xserver-xorg-input-tslib

upgrade

Note sure if it's needed, but:

chroot /media/mmc3 /bin/bash
apt-get update
apt-get upgrade

This got me new updates:

hildon-input-method libclutter-0.8-0 libetpan13 libhildon-im-ui3

The first one sounds helpful.

Set root password

Might as well set one in the chroot. I had X not come up once, but couldn't log in.

sudo gainroot
chroot /media/mmc3 /bin/bash
passwd

Misc

When you are booted up into Fremantle, it wouldn't hurt to fsck your MicroSD too....

umount /dev/mmcblk1p3 && fsck.ext3 -vvv /dev/mmcblk1p3

Automated install

Ok, here's dodgy scripts to automatically do lots of the above. I set these up because in the process of doing this I corrupted the filesystem on the MicroSD card enough times that I kept having to do this. If you don't understand what these scripts are doing, don't run them. Ah, and I use sudo lots, so you probably want do add this to /etc/sudoers:

user ALL = NOPASSWD: ALL


freemoe-mer-install

NOTE: Earlier versions of this "howto" used partition 1. I now have everything on partition 3!!!! Update your scripts as needed!

#!/bin/sh

set -x

echo "this is going to format your microsd, take care!"
echo "EARLIER VERSIONS OF THIS SCRIPT USED PARTITION 1"
echo "IT IS NOW USING PARITION 3! BEWARE AND UPDATE YOUR SCRIPT AS NEEDED!"

read ok
read ok
exit 0  # you get this right?

echo
 
sudo umount /dev/mmcblk1p3

sudo mkfs.ext3 -j -m1 /dev/mmcblk1p3

sudo fsck -vvv /dev/mmcblk1p3

sudo mount -o noatime /dev/mmcblk1p3 /media/mmc3/

cd /media/mmc3/

sudo tar zxf /home/user/MyDocs/Mer/mer-armel-generic-image-v0.17testing4.tar.gz

sudo mkdir mnt/initfs

sudo cp -a /lib/modules/*  /media/mmc3/lib/modules/

echo "WARNING WARNING WARNING!!!!"
echo "Copying over NON-FREE FIRMWARE"
echo "PAY PENANCE!!!!"
sudo cp -a /lib/firmware/*  /media/mmc3/lib/firmware/

sudo patch -p0 < /home/user/MyDocs/Mer/auto-startx-n900.patch

# not needed
sudo chmod +x etc/init.d/auto-startx

sudo cp -p /home/user/MyDocs/Mer/mer-setup-in-chroot ./

sudo chmod +x mer-setup-in-chroot

#echo "add . to root's PATH to help with debugging"
#sudo cp -p /home/user/MyDocs/Mer/root-bashrc /media/mmc3/root/.bashrc

#echo "copy over some scripts to help with debug"
#sudo cp -p /home/user/MyDocs/Mer/root/* /media/mmc3/root/

#echo "WARNING: this leaves /root with less-than-optimal perms"
#sudo chmod -R +x /media/mmc3/root/

sudo cp -p /etc/apt/auth /media/mmc3/etc/apt/

sync

echo
echo "now run ./mer-setup-in-chroot after you enter the chroot"
echo "this is convenient too:"
echo "export HOME=/root"
echo

sudo chroot /media/mmc3 /bin/bash

mer-setup-in-chroot

#!/bin/sh

# run this chrooted

set -x

apt-get update

apt-get upgrade

apt-get remove xserver-xorg-input-synaptics xserver-xorg-input-all

apt-get install xserver-xorg-input-tslib

sync

auto-startx-n900.patch

--- etc/init.d/auto-startx.orig	2009-10-20 12:39:30.000000000 -0300
+++ etc/init.d/auto-startx	2009-12-31 13:46:06.000000000 -0300
@@ -8,6 +8,7 @@
 start)
 	if [ ! -f /etc/default/autologin ] ; then
 		if [ -x /usr/sbin/first-boot-wizard.sh ] ; then
+			TSLIB_TSDEVICE=/dev/input/event3 TSLIB_CONFFILE=/etc/ts.conf ts_calibrate
 			/usr/bin/xinit /usr/sbin/first-boot-wizard.sh 2>&1 > /var/log/first-boot-wizard.log
 		else
 			echo -n "No user specified for auto login. Creating..."

Installing Fremantle Packages

Mer is missing some key parts, such as charging from battery and making phone calls. The first is killer, the second is a major drawback... Nokia decided to keep these parts proprietary which makes Mer on the N900 pretty pointless actually. Gar.

So I thought I would try to install (most begrudgingly) their proprietary Fremantle battery and cell phone applications under Mer. I was able to get the battery applet and some of the hal stuff going, but I don't think it was actually *doing* andything. I then installed the cell phone application, which pretty much screwed up the install.

So, in sum, the following doesn't work, but is a possible starting point for getting battery charging working under Mer.

I didn't have access to the original .debs, so I decided to just reconstruct them from the ones already installed under fremantle. It's a bit out there, but this is how I did it:

# boot into Mer

# We'll use dpkg-repack to rebuild the .debs
apt-get install dpkg-repack

# set up nice working space:
mkdir -p /mnt/fremantle

# umount the read/write of the NAND since we crash all the time and run out of battery
umount /mnt/initfs

# Remount it read-only some place nicer
mount -o ro -t ubifs ubi0:rootfs /mnt/fremantle/

# And put /home and the infamous /opt there too
mount -o ro /dev/mmcblk1p2 /mnt/fremantle/home/

# ...and MyDocs under that
mount -o ro /dev/mmcblk1p1 /mnt/fremantle/home/user/MyDocs/

# Set up stupid symlink for the /opt mess
cd /home
ln -s /mnt/fremantle/home/opt .

# create a nice place to put the .debs we'll create
mkdir /root/REPACKS 

# go hence
cd /root/REPACKS

# take a look all those fremantle applications
dpkg -l --root=/mnt/fremantle/

# Repack some random single package
dpkg-repack --root=/mnt/fremantle/ burgerspace

# rebuild the local repo
cd /root/REPACKS
dpkg-scanpackages . /dev/null | gzip -9c > Packages.gz

# Add this to /etc/apt/sources.list and perhaps comment out all the others
deb file:///root/REPACKS ./

# update from our new local repo
apt-get update

# and see that it works
apt-cache search burgerspace

# if that works, you can do them one at a time, or repack all of the 
# fremantle debs with this:
for i in `dpkg -l --root=/mnt/fremantle/ |grep ii | cut -f 3 -d " "` ;
do echo $i
	dpkg-repack --root=/mnt/fremantle/ $i
done

# Then re-run the archiverthinger
cd /root/REPACKS
dpkg-scanpackages . /dev/null | gzip -9c > Packages.gz

# update
apt-get update

# now install whatever
apt-get install foo

# This will get you a battery applet. It appears in the notification
# area, but I'm not sure if it is working or not. Perhaps try rebooting
# after installing it, and don't install other stuff which may pooch it
apt-get install hald-addon-bme bme-rx-51 status-area-applet-battery

# After I installed this, I had a mess
apt-get install rtcom-call-ui

Oh, and I guess I should also point out, that all of this needs to be done because nokia is doing something funky with apt-transport-https. I tried rebuilding theirs and using it under Mer, but it barfed on libraries. I tried using the Ubuntu one but that didn't work with the Nokia repos, even after copying over /etc/apt/auth.

Another way to do this would perhaps be to apt-get mirror the repos, if possible or a --download-only type approach. I didn't have apt-transport-https working so I just did this. Time for bed.

Build Packages

Packages are built using OpenSUSE's Build Service

  • Sign up for account on OBS: jebbajeb