Phone control

Revision as of 11:57, 22 April 2010

Please be aware that the recommended way to use the phone functionality is Telepathy:

RTCOM architecture

1 D-Bus
2 GConf
- 2.1 Reset GPRS data counter
3 Command line
- 3.1 Enable FM Transmitter
- 3.2 Disable FM Transmitter
4 GStreamer
- 4.1 Shoot photo after 10 seconds
5 Python

D-Bus

These D-Bus commands can be run from terminal or as shell scripts. Useful for scheduling events with fcron, executing from Desktop Command Execution Widget or Queen Beecon Widget, startup events, install scripts, etc. They should be run as:

run-standalone.sh SCRIPT.sh
run-standalone.sh dbus-send COMMAND

This is important to set up the environment correctly otherwise they may barf. If run as user "user" this is not needed.

Also note that most commands don't need "--print-reply" option. Those that don't need it should be tested without it and this page should be edited.

Phone

Open Phone application

dbus-send --type=method_call --dest=com.nokia.HildonDesktop.AppMgr /com/nokia/HildonDesktop/AppMgr com.nokia.HildonDesktop.AppMgr.LaunchApplication string:"rtcom-call-ui"

Make a phone call

dbus-send --system --type=method_call --print-reply --dest=com.nokia.csd.Call /com/nokia/csd/call com.nokia.csd.Call.CreateWith string:"$NUMBER" uint32:0

Change $NUMBER to phone number you want to call.

End current phone call

dbus-send --system --print-reply --dest=com.nokia.csd.Call /com/nokia/csd/call com.nokia.csd.Call.Release

This will release/end/hangup/reject the current call (or possibly all calls if more then one call is active - needs testing to verify behavior when more then 1 call active) or do nothing if no calls are active.

Get IMEI

dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM/security Phone.Sim.Security.get_imei

Get IMSI

dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM Phone.Sim.get_imsi

Get phone registration status

dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_registration_status

Turn loudspeaker on

dbus-send --type=method_call --dest=com.nokia.osso_hp_ls_controller /com/nokia/osso_hp_ls_controller com.nokia.osso_hp_ls_controller.loudspeaker.force_loudspeaker_off

Turn loudspeaker off

dbus-send --type=method_call --dest=com.nokia.osso_hp_ls_controller /com/nokia/osso_hp_ls_controller com.nokia.osso_hp_ls_controller.loudspeaker.force_loudspeaker_on

Start vibrating

dbus-send --system --print-reply --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_vibrator_pattern_activate string:PatternIncomingCall

Stop vibrating

dbus-send --system --print-reply --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_vibrator_pattern_deactivate string:PatternIncomingCall

Profiles

Set General

dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_profile string:"general"

Set Silent

dbus-send --type=method_call --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.set_profile string:"silent"

Query current profile

dbus-send --type=method_call --print-reply --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.get_profile

List all profiles

dbus-send --type=method_call --print-reply --dest=com.nokia.profiled /com/nokia/profiled com.nokia.profiled.get_profiles

LED

Activate LEDs

dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_led_pattern_activate string:"PatternCommunicationIM"

Deactivate LEDs

dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_led_pattern_deactivate string:"PatternCommunicationIM"

Messaging

New e-mail

dbus-send --type=method_call --dest=com.nokia.modest /com/nokia/modest com.nokia.modest.MailTo string:"mailto:"

Send and receive e-mail

It works, but it takes looong time (up to minute and a half) via GPRS (2.5, 3 or 3.5). Network and/or speed is not the problem, it just takes long via GPRS. It is much faster via Wi-Fi.

dbus-send --type=method_call --dest=com.nokia.modest /com/nokia/modest com.nokia.modest.SendReceive

Set presence

dbus-send --type=method_call --print-reply --dest=org.freedesktop.Telepathy.MissionControl /org/freedesktop/Telepathy/MissionControl org.freedesktop.Telepathy.MissionControl.SetPresence uint32:2 string:"I'm here"

Media player

Open file in media player

dbus-send --dest=com.nokia.mediaplayer /com/nokia/mediaplayer com.nokia.mediaplayer.mime_open string:"file:///$1"

Pause what's currently playing

dbus-send --dest=com.nokia.mafw.renderer.Mafw-Gst-Renderer-Plugin.gstrenderer /com/nokia/mafw/renderer/gstrenderer com.nokia.mafw.renderer.pause

Notifications

Send notification (orange one line popup)

dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:"NOTIFICATION"

Send dialog notification (orange multi line popup requiring user interaction)

dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteDialog string:"QUESTION?" uint32:0 string:"OK"

Not sure what string "OK" does, but it is needed and can be anything.

Securing

Lock

dbus-send --system --type=method_call --dest=com.nokia.system_ui /com/nokia/system_ui/request com.nokia.system_ui.request.devlock_open string:"com.nokia.mce" string:"/com/nokia/mce/request" string:"com.nokia.mce.request" string:"devlock_callback" uint32:'3'

Unlock

dbus-send --system --type=method_call --dest=com.nokia.system_ui /com/nokia/system_ui/request com.nokia.system_ui.request.devlock_close string:"com.nokia.mce" string:"/com/nokia/mce/request" string:"com.nokia.mce.request" string:"devlock_callback" uint32:'0'

Lock screen and keys

dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:"locked"

Unlock screen and keys

dbus-send --system --type=method_call --dest=com.nokia.mce /com/nokia/mce/request com.nokia.mce.request.req_tklock_mode_change string:"unlocked"

Networking

Connect to specific saved connection

dbus-send --system --type=method_call --dest=com.nokia.icd /com/nokia/icd com.nokia.icd.connect string:"IAP_ID" uint32:0

IAP_ID is internet access point identifier and can be obtained with the following command:

gconftool -R /system/osso/connectivity/IAP

Find lines which matches /system/osso/connectivity/IAP/<IAP_ID>

For GPRS connections replace "@32@" with a space in IAP_ID string.

Keep in mind that phone has to be disconnected in order to connect via this call.

Connect to any saved connection

dbus-send --system --type=method_call --dest=com.nokia.icd /com/nokia/icd com.nokia.icd.connect string:"[ANY]" uint32:0

Disconnect internet

dbus-send --system --dest=com.nokia.icd /com/nokia/icd_ui com.nokia.icd_ui.disconnect boolean:true

Connect (show change connection UI)

dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_ui.show_conn_dlg boolean:false

If "boolean:true" at the end, one-line notification saying "No saved connections available" appears. Maybe affects more than that?

Enable cellular radio

dbus-send --system --type=method_call --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.set_radio boolean:true

Disable cellular radio

dbus-send --system --type=method_call --dest=com.nokia.phone.SSC /com/nokia/phone/SSC com.nokia.phone.SSC.set_radio boolean:false

Radio mode

2G

dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:1

3G

dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:2

Dual

dbus-send --system --type=method_call --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology byte:0

Bluetooth

Identify adapter path

You need to know adapter path in order to send D-Bus call to the right place. You can get it with entering this command into the terminal:

dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.ListAdapters | awk -F'"' '/at/ {print $2}'

Enable

Using the adapter path value returned with previous command, for example /org/bluez/906/hci0.

dbus-send --system --type=method_call --dest=org.bluez /org/bluez/906/hci0 org.bluez.Adapter.SetProperty string:Powered variant:boolean:true

This one automatically inserts adapter path:

dbus-send --system --type=method_call --dest=org.bluez $(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.ListAdapters | awk -F'"' '/at/ {print $2}') org.bluez.Adapter.SetProperty string:Powered variant:boolean:true

Disable

dbus-send --system --type=method_call --dest=org.bluez /org/bluez/906/hci0 org.bluez.Adapter.SetProperty string:Powered variant:boolean:false

With auto-discovery of adapter path:

dbus-send --system --type=method_call --dest=org.bluez $(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.ListAdapters | awk -F'"' '/at/ {print $2}') org.bluez.Adapter.SetProperty string:Powered variant:boolean:false

Connect to specific device

devmac=00:11:22:33:44:55
service=AudioSink

adapter=$(dbus-send --system --print-reply --dest=org.bluez / org.bluez.Manager.ListAdapters | awk -F'"' '/at/ {print $2}')
device=$(dbus-send --system --print-reply --dest=org.bluez ${adapter} org.bluez.Adapter.FindDevice string:${devmac} | sed -ne 's/^.*object path //p' -e 's/"//g')
dbus-send --system --type=method_call --print-reply --dest=org.bluez ${device} org.bluez.${service}.Connect

Change the AudoSink to any service and the devmac to the MAC of bluetooth device.

Check for updates

dbus-send --type=method_call --dest=com.nokia.hildon_application_manager /com/nokia/hildon_application_manager com.nokia.hildon_application_manager.check_for_updates

Open link in browser

dbus-send --system --type=method_call --dest=com.nokia.osso_browser /com/nokia/osso_browser/request com.nokia.osso_browser.load_url string:"google.com"

Reboot

dbus-send --system --type=method_call --print-reply --dest=com.nokia.mce "/com/nokia/mce/request" com.nokia.mce.request.req_reboot

This is same as rebooting from power key menu (needs uncommenting in certain XML file to appear) and has been identified as insecure way to reboot the device (no filesystem synchronization, etc.). Better command is to simply enter "reboot" in root terminal.

Shutdown

dbus-send --system --type=method_call --print-reply --dest=com.nokia.mce "/com/nokia/mce/request" com.nokia.mce.request.req_shutdown

See warning at reboot D-Bus call (needs testing).

Show dashboard

dbus-send /com/nokia/hildon_desktop com.nokia.hildon_desktop.exit_app_view

Other

D-Bus Scripts

You can also use dbus-scripts to execute any command when various actions are triggered on D-Bus.

Panucci (pause)

dbus-send --type=method_call --dest=org.panucci.panucciInterface /panucciInterface org.panucci.panucciInterface.playPause

GConf

Reset GPRS data counter

gconftool-2 -u /system/osso/connectivity/network_type/GPRS/gprs_rx_bytes
gconftool-2 -u /system/osso/connectivity/network_type/GPRS/gprs_tx_bytes
gconftool-2 -s /system/osso/connectivity/network_type/GPRS/gprs_reset_time --type=string $(date +%s)

Command line

Enable FM Transmitter

/usr/bin/fmtx_client -p 1

Disable FM Transmitter

/usr/bin/fmtx_client -p 0

GStreamer

Shoot photo after 10 seconds

The camera application must be off for it to work. And of course the camera shutter must be open...

/bin/sleep 10 ; /usr/bin/gst-launch v4l2camsrc device=/dev/video0 num-buffers=1 \! video/x-raw-yuv,width=2592,height=1968  \! ffmpegcolorspace \! jpegenc \! filesink location=/home/user/MyDocs/DCIM/photo.jpg

To shoot from the front camera, change /dev/video0 to /dev/video1 and the proper resolution:

/bin/sleep 10 ; /usr/bin/gst-launch v4l2camsrc device=/dev/video1 num-buffers=1 \! video/x-raw-yuv,width=640,height=480  \! ffmpegcolorspace \! jpegenc \! filesink location=/home/user/MyDocs/DCIM/photo.jpg

Other way:

/bin/sleep 10; /usr/bin/gst-launch v4l2camsrc ! ffmpegcolorspace ! jpegenc ! identity error-after=1 ! filesink location=/home/user/MyDocs/DCIM/photo.jpg

Python

Make a phone call

 import dbus
 def place_call(number):
   bus = dbus.SystemBus()
   csd_call = dbus.Interface(bus.get_object('com.nokia.csd',
                                            '/com/nokia/csd/call'),
                                            'com.nokia.csd.Call')
   csd_call.CreateWith(str(number), dbus.UInt32(0))

Send SMS

From: http://talk.maemo.org/showpost.php?p=548948&postcount=52

#!/usr/bin/env python2.5

import pexpect
import time
from subprocess import *

child = pexpect.spawn('pnatd');
child.send('at\r');
time.sleep(0.25);
child.send('at+cmgf=1\r');
time.sleep(0.25);
child.send('at+cmgs="+XXXXXXX"\r');
child.send('SMSTEXTSMSTEXTSMSTEXT');
child.send(chr(26));
child.send(chr(26));
child.sendeof();

Send dialog notification (orange multi line popup requiring user interaction)

 import dbus
 def show_notification_dialog(message, mode="single"):
   bus = dbus.SystemBus()
   iface = dbus.Interface(bus.get_object('org.freedesktop.Notifications',
                                         '/org/freedesktop/Notifications'),
                                         'org.freedesktop.Notifications')
   if mode == "single":
       iface.SystemNoteInfoprint(message)
   elif mode == "multiline":
       iface.SystemNoteDialog(str(message), dbus.UInt32(0), 'Ok')

This function allows you to show notification either with multiline (on maemo pre-5 it will show a dialog with an "Ok" button) or single line (tiny notifications hiding automatically).

Take a screenshot

import gtk.gdk

w = gtk.gdk.get_default_root_window()
sz = w.get_size()
print "The size of the window is %d x %d" % sz
pb = gtk.gdk.Pixbuf(gtk.gdk.COLORSPACE_RGB,False,8,sz[0],sz[1])
pb = pb.get_from_drawable(w,w.get_colormap(),0,0,0,0,sz[0],sz[1])
if (pb != None):
  pb.save("screenshot.png","png")
  print "Screenshot saved to screenshot.png."
else:
  print "Unable to get the screenshot."

Credits: took code from here, where there is also a QT way to do it.

Retrieved from "http://wiki.maemo.org/Phone_control"

Categories: Power users | Development

@@ Line 3: / Line 3: @@
 =D-Bus=
-These D-Bus commands can be run from terminal or as shell scripts. Useful for scheduling events with fcron, executing from Desktop Command Execution Widget, startup events, install scripts, etc. They should be run as:
+These D-Bus commands can be run from terminal or as shell scripts. Useful for scheduling events with fcron, executing from Desktop Command Execution Widget or [[Queen Beecon Widget]], startup events, install scripts, etc. They should be run as:
   run-standalone.sh SCRIPT.sh
@@ Line 309: / Line 309: @@
   dbus-send --type=method_call --dest=org.panucci.panucciInterface /panucciInterface org.panucci.panucciInterface.playPause
 =GConf=

Personal tools

Navigation

Views

Phone control

Revision as of 11:57, 22 April 2010

Contents

D-Bus

Phone

Open Phone application

Make a phone call

End current phone call

Get IMEI

Get IMSI

Get phone registration status

Turn loudspeaker on

Turn loudspeaker off

Start vibrating

Stop vibrating

Profiles

Set General

Set Silent

Query current profile

List all profiles

LED

Activate LEDs

Deactivate LEDs

Messaging

New e-mail

Send and receive e-mail

Set presence

Media player

Open file in media player

Pause what's currently playing

Notifications

Send notification (orange one line popup)

Send dialog notification (orange multi line popup requiring user interaction)

Securing

Lock

Unlock

Lock screen and keys

Unlock screen and keys

Networking

Connect to specific saved connection

Connect to any saved connection

Disconnect internet

Connect (show change connection UI)

Enable cellular radio

Disable cellular radio

Radio mode

2G

3G

Dual

Bluetooth

Identify adapter path

Enable

Disable

Connect to specific device

Check for updates

Open link in browser

Reboot

Shutdown

Show dashboard

Other

D-Bus Scripts

Panucci (pause)

GConf

Reset GPRS data counter

Command line

Enable FM Transmitter

Disable FM Transmitter

GStreamer

Shoot photo after 10 seconds

Python

Make a phone call

Send SMS

Send dialog notification (orange multi line popup requiring user interaction)

Take a screenshot