N900 Ad-hoc WiFi Hotspot

(New page: This method works but is not useable for more than a proof of concept because it suffers '''40% packet loss at close range''' between the N900 and the laptop. == On the N900 == /etc/apt/s...)
(Made instructions more generic. Also note, that ifconfig has been deprecated, and so has been removed from Client instructions.)
 
(7 intermediate revisions not shown)
Line 1: Line 1:
-
This method works but is not useable for more than a proof of concept because it suffers '''40% packet loss at close range''' between the N900 and the laptop.
+
== Working solution ==
 +
 
 +
See http://talk.maemo.org/showthread.php?t=73406
 +
 
 +
It may be noted, that scanning for networks on the N900 seems to disconnect everything. So starting wlancond seems to be a bad solution, better stop it.
 +
 
 +
== Old article ==
 +
 
 +
This method works but is not usable for more than a proof of concept because it suffers '''40% packet loss at close range''' between the [[Nokia N900|N900]] and the laptop.
 +
 
== On the N900 ==
== On the N900 ==
-
/etc/apt/sources.list
+
 
-
deb http://repository.maemo.org/extras-devel/ fremantle free
+
<ol>
-
apt-get install iptables
+
<li>[[Extras-devel#How to activate Extras-devel|Enable extras-devel]]</li>
-
http://wiki.maemo.org/Kernel_Power#Installation_of_the_stable_kernel_from_extras
+
<li>Install [http://maemo.org/packages/view/iptables/ iptables] at a [[terminal]] with [[root access]]:<pre>apt-get install iptables</pre></li>
-
apt-get install kernel-power-settings
+
<li>Install [http://maemo.org/packages/view/kernel-power-settings/ kernel-power-settings] (see [[Kernel_Power#Installation_of_the_stable_kernel_from_extras|the detailed installation instructions]]):<pre>apt-get install kernel-power-settings</pre></li>
-
# connect using GPRS and not a wifi hotspot
+
<li>Connect to the Internet with GPRS</li>
-
echo 1 > /proc/sys/net/ipv4/ip_forward
+
<li>Setup iptables to allow forwarding:
-
iptables -t nat -A POSTROUTING -o gprs0 -j MASQUERADE
+
<pre>
-
iwconfig wlan0 mode ad-hoc channel 3
+
echo 1 > /proc/sys/net/ipv4/ip_forward
-
ifconfig wlan0 192.168.4.15 up
+
iptables -t nat -A POSTROUTING -o gprs0 -j MASQUERADE
-
iwconfig wlan0 essid N900
+
</pre></li>
-
== On the laptop ==
+
<li>Bring up te ad hoc wireless network:
-
sudo iwconfig wlan0 mode ad-hoc channel 3
+
<pre>
-
sudo ifconfig wlan0 192.168.4.14 up
+
iwconfig wlan0 mode ad-hoc channel 3
-
sudo iwconfig essid N900
+
ifconfig wlan0 192.168.4.15 up
-
sudo route add default gw 192.168.4.15
+
iwconfig wlan0 essid N900
 +
</pre></li>
 +
</ol>
 +
 
 +
== On the Client ==
 +
 
 +
Simply connect to the ad hoc wireless network.
 +
 
 +
In this configuration, a DHCP server is not run by the N900, so addresses will have to be manually assigned to clients.
 +
 
 +
Note that on Android devices, a patched "wpa_supplicant" file may be necessary to see the network.
[[Category:Connectivity]]
[[Category:Connectivity]]
[[Category:N900]]
[[Category:N900]]
[[Category:Power users]]
[[Category:Power users]]
-
[[Category:Hotspot]]
+
[[Category:WiFi]]

Latest revision as of 16:02, 8 June 2012

Contents

[edit] Working solution

See http://talk.maemo.org/showthread.php?t=73406

It may be noted, that scanning for networks on the N900 seems to disconnect everything. So starting wlancond seems to be a bad solution, better stop it.

[edit] Old article

This method works but is not usable for more than a proof of concept because it suffers 40% packet loss at close range between the N900 and the laptop.

[edit] On the N900

  1. Enable extras-devel
  2. Install iptables at a terminal with root access:
    apt-get install iptables
  3. Install kernel-power-settings (see the detailed installation instructions):
    apt-get install kernel-power-settings
  4. Connect to the Internet with GPRS
  5. Setup iptables to allow forwarding: 
    echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o gprs0 -j MASQUERADE
  6. Bring up te ad hoc wireless network: 
    iwconfig wlan0 mode ad-hoc channel 3
ifconfig wlan0 192.168.4.15 up
iwconfig wlan0 essid N900

[edit] On the Client

Simply connect to the ad hoc wireless network.

In this configuration, a DHCP server is not run by the N900, so addresses will have to be manually assigned to clients.

Note that on Android devices, a patched "wpa_supplicant" file may be necessary to see the network.

Retrieved from "http://wiki.maemo.org/N900_Ad-hoc_WiFi_Hotspot"