User:Mr pingu
(→Setting up the device)
 
(16 intermediate revisions not shown)
Line 29: Line 29:
<pre>apt-get update  
<pre>apt-get update  
-
apt-get install  kernel-power-flasher linux-backports-modules-power recovery-boot busybox-power powertop shortcutd tracker-cfg wpakey-editor powertop phone-control nano-opt gconf-editor procps bash3 swappolube</pre>
+
apt-get install  kernel-power-flasher backupmenu busybox-power powertop shortcutd tracker-cfg wpakey-editor powertop sudser phone-control nano-opt gconf-editor procps bash3 </pre>
Line 37: Line 37:
* Tracker-cfg tick lowmemorymode and set throttle to 10
* Tracker-cfg tick lowmemorymode and set throttle to 10
* Use proposed swappolube settings, except swappiness should be 50
* Use proposed swappolube settings, except swappiness should be 50
-
* Turn off swap on eMMC, enable on uSD
+
* Turn off swap on eMMC, enable on uSD (use ereswap)
-
Boot script placed in /etc/event.d/swapusd
+
Boot script placed in /etc/event.d/iosettings
 +
 
 +
These settings are mixed swapolube and freemangordons settings.
<pre>
<pre>
Line 49: Line 51:
script
script
-
sleep 60
+
 
-
swapon /dev/mmcblk1p2
+
echo 50 > /proc/sys/vm/swappiness       
-
swapoff /dev/mmcblk0p3
+
echo 0 > /proc/sys/vm/page-cluster       
 +
echo 1 > /proc/sys/vm/laptop_mode       
 +
echo 1 > /proc/sys/vm/oom_kill_allocating_task       
 +
echo 0 > /proc/sys/vm/dirty_expire_centisecs       
 +
echo 0 > /proc/sys/vm/dirty_writeback_centisecs     
 +
echo 60 > /proc/sys/vm/dirty_background_ratio       
 +
echo 95 > /proc/sys/vm/dirty_ratio       
 +
echo 0 > /proc/sys/net/ipv4/tcp_timestamps       
 +
echo 1 > /proc/sys/net/ipv4/tcp_no_metrics_save
 +
echo 4096 > /sys/block/mmcblk0/queue/nr_requests
 +
echo 4096 > /sys/block/mmcblk1/queue/nr_requests
 +
echo 0 > /sys/block/mmcblk0/queue/iosched/slice_idle
 +
echo 0 > /sys/block/mmcblk1/queue/iosched/slice_idle
 +
echo 32 > /sys/block/mmcblk0/queue/iosched/quantum
 +
echo 32 > /sys/block/mmcblk1/queue/iosched/quantum
 +
echo 80 > /sys/block/mmcblk0/queue/iosched/fifo_expire_sync
 +
echo 80 > /sys/block/mmcblk1/queue/iosched/fifo_expire_sync
 +
echo 180 > /sys/block/mmcblk0/queue/iosched/fifo_expire_async
 +
echo 180 > /sys/block/mmcblk1/queue/iosched/fifo_expire_async
 +
 
end script
end script
Line 61: Line 82:
* '''Installing handy tools'''
* '''Installing handy tools'''
-
<pre>apt-get install conkylayoutswitcher flashlight-applet alarmed ssh-status clipman led-pattern-editor cl-launcher macchanger hostmode-gui extkbd extmou easy-deb-chroot extended-contacts-search gconf-editor less simple-brightness-applet</pre>
+
<pre>apt-get install conkylayoutswitcher flashlight-applet alarmed ssh-status clipman led-pattern-editor cl-launcher hostmode-gui extkbd extmou extended-contacts-search gconf-editor less simple-brightness-applet</pre>
* '''Installing some garbage I like to use'''
* '''Installing some garbage I like to use'''
-
<pre>apt-get install aircrack-ng stkeys brainparty cutetube-qml dosbox supertux-stable frogatto colorflood pierogi leafpad opera filebox irggu</pre>
+
<pre>apt-get install aircrack-ng stkeys brainparty cutetube-qml dosbox supertux-stable frogatto colorflood pierogi telepathy-msn-pecan leafpad opera filebox irggu macchanger easy-deb-chroot</pre>
-
----
 
-
'''Personalizing the device'''
+
* '''Pentesting'''
 +
<pre>
 +
aircrack-ng ettercap-gtk wireshark cleven reaver cowpatty mdk3 driftnet dsniff fping gnome-nettool iftop ipv6-support kismet macchanger qnetman stkeys tcptraceroute yamas wireshark wifi-pwner traceroute2 python-scapy ettercap-gtk john nmap bash3 status-area-applet-tor
 +
</pre>
 +
 
* Install widgets and themes
* Install widgets and themes
<pre> apt-get install awoken-icon-theme black-plastic-theme plastic-addon-pack-1 cal-home-widget connectnow-home-widget queen-beecon quick-launch</pre>
<pre> apt-get install awoken-icon-theme black-plastic-theme plastic-addon-pack-1 cal-home-widget connectnow-home-widget queen-beecon quick-launch</pre>
-
 
-
* Make the FMTX applet always visible
 
-
gconftool-2 -s /apps/osso/maemo-statusmenu-fmtx/always_visible -t bool true
 
-
 
-
 
----
----
Line 89: Line 108:
update-sudoers</pre>
update-sudoers</pre>
-
* My transitions.ini based on dragoss91 smoothest transitions.ini
+
'''Fix Wifite.py'''
-
<pre># This file contains timings and values for transitions in hildon-desktop
+
-
# duration = time in milliseconds
+
-
# zoom = amount to zoom out the background. 1 = none, 0.5 = zoom to half size
+
-
# radius = radius of blur (this is actually the number of blur iterations,
+
-
# so the bigger the number the longer it takes)
+
-
# saturation = the amount of colour left in the background (0 = grey, 1 = normal)
+
-
# brightness = brightness of the background (0 = black, 1 = normal)
+
-
[blur]
+
<pre> sudo sed -i "s/(prefix='wifite')/(prefix='wifite',dir='\/opt\/tmp')/g" /home/user/MyDocs/MyScripts/wifite.py; sudo if [ ! -d "/opt/tmp" ]; then mkdir /opt/tmp; fi </pre>
-
turbo = 0
+
-
duration = 150
+
-
# Zoom out of the task navigator before it fades out
+
* Make the FMTX applet always visible
-
# -- zoom: how much to scale the switcher when going to launcher
+
gconftool-2 -s /apps/osso/maemo-statusmenu-fmtx/always_visible -t bool true
-
# (the second layer of the launcher would scale it twice
+
-
# as much but the switcher is hidden by that time currently)
+
-
# -- zoom_for_home: how much to scale the switcher when leaving for home
+
-
# -- zoom_duration: the number of miliseconds to spend on zooming
+
-
# a thumbnail
+
-
# -- fly_duration: how long should it take for the thumbnails to rearrange
+
-
# -- notifade_in/out: time to fade the notifications
+
-
#
+
-
[task_nav]
+
-
zoom = 0.85
+
-
zoom_for_home = 0.9
+
-
zoom_duration = 250
+
-
fly_duration = 250
+
-
notifade_in = 150
+
-
notifade_out = 150
+
-
tile_font = SwissA 15
+
-
# Blurring of the home view
+
* Microphone -> FMTX
-
# -- radius: amount of iterations of blur filter to perform when not zoooming
+
arecord | aplay
-
# eg. for dialogs
+
-
# -- radius_more: amount of iterations of blur filter to perform when zooming
+
-
# eg. for launcher/task navigator
+
-
# -- saturation: saturation of the background when blurred
+
-
# -- brightness: brightness of the background when blurred
+
-
# -- zoom: Basic amount to scale the home view by (gets multiplied by how many
+
-
# 'levels' deep the UI is - eg. launcher is one level, launcher submenu
+
-
# is another)
+
-
# -- zoom_applets: Amount to scale applets by when zooming out
+
-
# -- zoom_on_press: set to 1 to include a zoom effect when the screen is pressed
+
-
# -- parallax: Amount of parallax between desktop and widget layers when panning
+
-
[home]
+
Enable FM-transmitter to work
-
radius = 0
+
-
radius_more = 0
+
-
saturation = 1
+
-
brightness = 1
+
-
zoom = 1
+
-
zoom_applets = 1.0
+
-
zoom_on_press = 0
+
-
parallax = 1.0
+
-
# These control the deceleration of the launcher pages. When panning freely
+
'''Record video with Gstreamers and take Screenshot'''
-
# (decelerating) the velocity of the launcher page is adjusted by this much.
+
-
# strong_deceleration_rate is effective in the bouncing zones. Uncomment if
+
-
# you want faster panning.
+
-
[launcher]
+
-
#deceleration_rate = 0.98
+
-
#strong_deceleration_rate = 0.7
+
-
# The glow effect around launcher buttons[launcher_glow]
+
<pre> Enable SDK and tools repo
-
duration_in = 100
+
apt-get install gst-tools gstreamer0.10-plugins-good-extra
-
duration_out = 200
+
-
radius = 14
+
-
brightness = 0.95
+
-
# The items below are for the transitions that are applied
+
http://forum.meego.com/showthread.php?t=4833
-
# to a 'page' of launcher icons
+
-
# -- duration: time in ms
+
-
# -- depth: amount to move icons backwards and forwards (with perspective)
+
-
#          this is pretty much how big or small the icons get   
+
-
# -- sequenced: for in and in_sub, whether icons swoop nicely in (1)
+
-
#              or whether they just all zoom in as one (0)
+
-
# -- keyframes: A list of values that are linearly interpolated between
+
-
#              to produce the movement of the launcher tiles. There can
+
-
#              be any number of values as long as there are 2 or more.  
+
-
#              <1 means nearer the viewer, >1 means further away
+
-
# -- keyframes_label: The values used for fading in the labels. 0=transparent
+
-
#                    1=opaque
+
-
# -- keyframes_icon: The values used for fading in the icons. 0=transparent
+
-
#                    1=opaque
+
-
# Launcher top layer first appearing
+
-
[launcher_in]
+
-
duration=600
+
-
sequenced=1
+
-
depth=300
+
-
keyframes=0,0.17,0.39,0.65,0.87,1.13,1.26,1.22,1.17,1.13,1.09,1.04,1,1,1,1,1,1,1,1,1
+
-
keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1
+
-
keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
+
-
 
+
-
# Launcher top layer disappearing
+
-
[launcher_out]
+
-
sequenced=1
+
-
keyframes=0,0.17,0.39,0.65,0.87,1.13,2,1.13,0.87,0.65,0.39,0.17,1,1,1,1,1,1,1,1,1
+
-
depth=-100
+
-
keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
+
-
keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1
+
-
duration=100
+
-
 
+
-
# launcher top layer disappearing when a layer in front
+
-
[launcher_out_back]
+
-
duration=200
+
-
depth=50
+
-
 
+
-
# launch animation
+
-
# duration_out - amount of time to take when fading the launcher out and application in
+
-
# delay - the amount of time to wait after the window has appeared before we fade out
+
-
# (this time is *included* in duration_out, so it must be <= duration_out)
+
-
[launcher_launch]
+
-
duration = 400
+
-
delay = 500
+
-
duration_out = 700
+
-
depth = 100
+
-
 
+
-
# sub-menu appearing
+
-
[launcher_in_sub]
+
-
duration=600
+
-
sequenced=1
+
-
depth=300
+
-
keyframes=0,0.17,0.39,0.65,0.87,1.13,1.26,1.22,1.17,1.13,1.09,1.04,1,1,1,1,1,1,1,1,1
+
-
keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1
+
-
keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
+
-
 
+
-
# sub-menu disappearing
+
-
[launcher_out_sub]
+
-
sequenced=0
+
-
keyframes=0,0.17,0.39,0.65,0.87,1.13,2,1.13,0.87,0.65,0.39,0.17,1,1,1,1,1,1,1,1,1
+
-
depth=-100
+
-
keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
+
-
keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1
+
-
duration=100
+
-
 
+
-
# main disappearing when sub-menu appears
+
-
[launcher_back]
+
-
duration=150
+
-
depth=-450
+
-
 
+
-
# main appearing when sub-menu disappears
+
-
[launcher_forward]
+
-
duration=150
+
-
depth=-450
+
-
 
+
-
 
+
-
 
+
-
# Screen rotation transition
+
-
# duration_in = time for rotation before blanking
+
-
# duration_out = time for rotation after blanking
+
-
# damage_timeout = in the rotation transition, the amount of milliseconds to
+
-
# leave after we get a damage event before we transition back
+
-
# from blanking.
+
-
# damage_timeout_max = maximum amount of time we may wait if we keep getting
+
-
# damage events.
+
-
# angle = rotation angle for each transition, in degrees. Ideally this is set
+
-
# so that the screen looks like it keeps turning at the same speed
+
-
# during blanking. 0 is none, 90 degrees is side-on
+
-
[rotate]
+
-
duration_in = 150
+
-
duration_out = 150
+
-
damage_timeout = 0
+
-
damage_timeout_plus = 0
+
-
damage_timeout_max = 0
+
-
angle = 0
+
-
# changed from 100 in order to reduce jerkiness of transition (also changed the
+
-
# fade-out so it doesn't fade to black completely)
+
-
 
+
-
# App close transition
+
-
[app_close]
+
-
duration = 380
+
-
 
+
-
 
+
-
# Popup for dialogs and status menu
+
-
[popup]
+
-
duration_in = 250
+
-
duration_out = 250
+
-
 
+
-
# Fade in for banners
+
-
# _alpha specifies the final transparency of various things
+
-
# currently only banner_note and info_note are supported
+
-
[fade]
+
-
duration_in = 200
+
-
duration_out = 500
+
-
banner_note_alpha = 0.85
+
-
info_note_alpha = 0.85
+
-
 
+
-
# Transition for notification previews
+
-
[notification]
+
-
is_cool = 0
+
-
duration_in = 400
+
-
duration_out = 450
+
-
 
+
-
# Sliding subview window transition
+
-
[subview]
+
-
duration_in = 250
+
-
duration_out = 250
+
-
 
+
-
[loading_timeout]
+
-
# This is multiplied by the load average to find the timeout
+
-
# in seconds. before "Unable to load" is displayed. There is
+
-
# a minimum of 10s.
+
-
load_average_factor = 4.5
+
-
 
+
-
# Edit mode configuration
+
-
[edit_mode]
+
-
snap_grid_size=8
+
-
# Set to 0 if snap to grid should be only happen when widget is released
+
-
snap_to_grid_while_move = 1
+
-
 
+
-
##
+
-
# Special tweaks (a restart might be required)
+
-
##
+
-
[thp_tweaks]
+
-
# Blurless desaturation (0 = default, 1 = MeeGo/Symbian-style)
+
-
blurless = 1
+
-
# saturation value for blurless (0 = no color, 1 = full color)
+
-
blurless_saturation = 0
+
-
# [home] brightness, is used for the brightness
+
-
 
+
-
# Bigger task switcher (0 = default, 1 = single column, 2 = two columns)
+
-
taskswitcher = 0
+
-
 
+
-
# Rotation around the Z axis (0 = rotate around X/Y, 1 = rotate around Z)
+
-
zaxisrotation = 0
+
-
 
+
-
# Forced app auto-rotation (0 = default, 1 = auto-rotate every app)
+
-
forcerotation = 0
+
-
 
+
-
# Popup feedback using the "tactile" utility (0 = disabled, 1 = enabled)
+
-
# You need to install "tactile" from the maemo.org repositories for this
+
-
tactilepopups = 0
+
-
 
+
-
# Lock application window in landscape mode.
+
-
# Example: blacklist = mediaplayer osso-xterm worldclock image-viewer camera-ui
+
-
whitelist = osso-browser tablet-browser-ui rtcom-messaging-ui leafpad
+
</pre>
</pre>
-
'''Chroot'''
+
Screenshot makes a screenshot every x times in the current directory named frame0000x.png
-
* When using a Maemo 5 PR1.3 qchroot /home/opt/ from the real maemo installation is mounted which results in a big mess. So we need to edit the qchroot to only mount MyDocs and not the whole /home/ folder
+
-
<pre>#/sbin/qchroot/
+
-
Comment out line 82
+
-
 
+
-
81 # Do it the Fremantle way.
+
-
82 # mount /dev/mmcblk0p2 "$CHROOT/home"
+
 +
<pre> gst-launch-0.10 ximagesrc ! video/x-raw-rgb,framerate=1/10 ! ffmpegcolorspace ! pngenc snapshot=false ! multifilesink location="frame%05d.png"
</pre>
</pre>
-
 
-
* pymaemo-optify works not as expected while it's one file system instead of 3 partitions.
 
-
 
-
<pre>To fix this install pymaemo-optify first
 
-
Then
 
-
 
-
mv /etc/event.d/pymaemo-optify /etc/eventd.d/pymaemo-optify.bak
 
-
mv /etc/init.d/pymaemo-optify /etc/init.d/pymaemo-optify.bak</pre>
 

Latest revision as of 10:44, 12 August 2014

In this page I post all my snippets of tweak and mods, I made this for the reference of all tweaks I did and might need after a reflash


[edit] Repositories

/etc/apt/sources.list.d/hildon-application-manager.list 

deb https://downloads.maemo.nokia.com/fremantle/ssu/apps/ ./ 
deb https://downloads.maemo.nokia.com/fremantle/ssu/mr0 ./ 
deb https://downloads.maemo.nokia.com/fremantle1.2/ovi/ ./ 
deb http://repository.maemo.org/extras/ fremantle-1.3 free non-free
deb http://repository.maemo.org/community-testing/ fremantle free non-free
deb http://repository.maemo.org/extras-devel/ fremantle free non-free
deb http://my-maemo.com/repository/ fremantle user
deb http://repository.maemo.org/ fremantle/sdk free
deb http://repository.maemo.org/ fremantle/tools free
deb http://repository.maemo.org/extras-testing/ fremantle free non-free
deb http://qole.org/repository/ maemo fremantle


[edit] Setting up the device

Setting up the most important applications 

apt-get update 
apt-get install  kernel-power-flasher backupmenu busybox-power powertop shortcutd tracker-cfg wpakey-editor powertop sudser phone-control nano-opt gconf-editor procps bash3


improve performance

  • Tracker-cfg tick lowmemorymode and set throttle to 10
  • Use proposed swappolube settings, except swappiness should be 50
  • Turn off swap on eMMC, enable on uSD (use ereswap)

Boot script placed in /etc/event.d/iosettings

These settings are mixed swapolube and freemangordons settings. 

start on started hildon-desktop
stop on starting shutdown
console none
service

script


echo 50 > /proc/sys/vm/swappiness        
echo 0 > /proc/sys/vm/page-cluster        
echo 1 > /proc/sys/vm/laptop_mode        
echo 1 > /proc/sys/vm/oom_kill_allocating_task        
echo 0 > /proc/sys/vm/dirty_expire_centisecs        
echo 0 > /proc/sys/vm/dirty_writeback_centisecs       
echo 60 > /proc/sys/vm/dirty_background_ratio        
echo 95 > /proc/sys/vm/dirty_ratio        
echo 0 > /proc/sys/net/ipv4/tcp_timestamps        
echo 1 > /proc/sys/net/ipv4/tcp_no_metrics_save
echo 4096 > /sys/block/mmcblk0/queue/nr_requests
echo 4096 > /sys/block/mmcblk1/queue/nr_requests
echo 0 > /sys/block/mmcblk0/queue/iosched/slice_idle
echo 0 > /sys/block/mmcblk1/queue/iosched/slice_idle
echo 32 > /sys/block/mmcblk0/queue/iosched/quantum
echo 32 > /sys/block/mmcblk1/queue/iosched/quantum
echo 80 > /sys/block/mmcblk0/queue/iosched/fifo_expire_sync
echo 80 > /sys/block/mmcblk1/queue/iosched/fifo_expire_sync
echo 180 > /sys/block/mmcblk0/queue/iosched/fifo_expire_async
echo 180 > /sys/block/mmcblk1/queue/iosched/fifo_expire_async


end script


  • Installing handy tools 
apt-get install conkylayoutswitcher flashlight-applet alarmed ssh-status clipman led-pattern-editor cl-launcher hostmode-gui extkbd extmou  extended-contacts-search gconf-editor less simple-brightness-applet
  • Installing some garbage I like to use 
apt-get install aircrack-ng stkeys brainparty cutetube-qml dosbox supertux-stable frogatto colorflood pierogi telepathy-msn-pecan leafpad opera filebox irggu macchanger easy-deb-chroot


  • Pentesting 
aircrack-ng ettercap-gtk wireshark cleven reaver cowpatty mdk3 driftnet dsniff fping gnome-nettool iftop ipv6-support kismet macchanger qnetman stkeys tcptraceroute yamas wireshark wifi-pwner traceroute2 python-scapy ettercap-gtk john nmap bash3 status-area-applet-tor
  • Install widgets and themes 
 apt-get install awoken-icon-theme black-plastic-theme plastic-addon-pack-1 cal-home-widget connectnow-home-widget queen-beecon quick-launch

Tweaks

  • Use sudo while already root. Sometimes when I am root I still type sudo in-front of a command and it spits out the help of sudo. This will add root to sudoers and solve that. Not very useful but it's a small and convenient tweak 
sudo gainroot
echo "user ALL=(ALL) NOPASSWD: ALL" >> everybody.sudoers
echo "root ALL=(ALL) NOPASSWD: ALL" >> everybody.sudoers
mv everybody.sudoers /etc/sudoers.d
update-sudoers

Fix Wifite.py 

 sudo sed -i "s/(prefix='wifite')/(prefix='wifite',dir='\/opt\/tmp')/g" /home/user/MyDocs/MyScripts/wifite.py; sudo if [ ! -d "/opt/tmp" ]; then mkdir /opt/tmp; fi
  • Make the FMTX applet always visible 
gconftool-2 -s /apps/osso/maemo-statusmenu-fmtx/always_visible -t bool true
  • Microphone -> FMTX

arecord | aplay

Enable FM-transmitter to work

Record video with Gstreamers and take Screenshot 

 Enable SDK and tools repo
apt-get install gst-tools gstreamer0.10-plugins-good-extra

http://forum.meego.com/showthread.php?t=4833

Screenshot makes a screenshot every x times in the current directory named frame0000x.png 

 gst-launch-0.10 ximagesrc ! video/x-raw-rgb,framerate=1/10 ! ffmpegcolorspace ! pngenc snapshot=false ! multifilesink location="frame%05d.png"
Retrieved from "http://wiki.maemo.org/User:Mr_pingu"