Partitioning a flash card
m (Partitioning an MMC card moved to Partitioning a flash card: MMC is deprecated) |
(Touched up and updated a bit, could still use some work) |
||
| Line 1: | Line 1: | ||
{{Midgard article}} | {{Midgard article}} | ||
| - | ''' | + | '''WARNING: Partitioning your flash card will delete all data of the card, so be sure to back up any important data to a computer or another flash card.''' |
| - | '''Note:''' | + | '''Note:''' As of 4-28-2008 Penguinbait has made a deb package that automates all of this for you. See http://www.internettablettalk.com/forums/showthread.php?t=19639 and http://www.internettablettalk.com/forums/showthread.php?t=20534 |
| - | + | ||
| - | + | ||
== Get root access == | == Get root access == | ||
| Line 13: | Line 11: | ||
== Install the needed packages and create partitions == | == Install the needed packages and create partitions == | ||
| - | '''Note:''' on the | + | '''Note:''' on the N800 and N810 the filesystem mounted under /media/mmc1 is the external media card and the internal card is mounted under /media/mmc2. The device that is mounted under /media/mmc1 is /dev/mmcblk1 and not mmcblk0 that is mounted under /media/mmc2. If you plan to format the external media card replace mmcblk0p with mmcblk1p. |
| - | In | + | In Xterm on your tablet, '''as root''', run: |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | apt-get install e2fsprogs | |
| + | umount /media/mmc1 | ||
| + | umount /media/mmc2 | ||
| + | sfdisk /dev/mmcblk0 | ||
| + | /dev/mmcblk0p1:1,15000,6 | ||
| + | /dev/mmcblk0p2:15001,, | ||
| + | /dev/mmcblk0p3: | ||
| + | /dev/mmcblk0p4: | ||
| - | + | This will create two partitions in a 1GB flash card: the first one is VFAT (that's what number 6 means), and the second one is LINUX_83. The size of the first one is almost 480MB (that's the meaning of the 15000), and the second one is sized till the end of the card (that's what ,, means). Partitions three and four are empty. You may calculate your partitions based on my description, or read more about [http://linux.die.net/man/8/sfdisk sfdisk]. (Actually 15000 means cylinders, being each one of 32KB. So that 15000 cylinder x 32 KB/cylinder = 480MB. This means that 30000 cylinder x 32 KB/cylinder = 960MB). It will probably be easier to copy the example and just modify it slightly. | |
== Format the partitions == | == Format the partitions == | ||
Type as root: | Type as root: | ||
| - | + | ||
| - | + | mkdosfs /dev/mmcblk0p1 | |
| - | + | shutdown -r now | |
| - | + | ||
| - | After it reboots, then open | + | After it reboots, then open Xterm and, '''as root''', run: |
| - | + | ||
| - | + | mke2fs /dev/mmcblk0p2 | |
| - | + | shutdown -r now | |
| - | + | ||
== Mounting the partitions == | == Mounting the partitions == | ||
| - | The VFAT partition will be mounted by the system automagically at start-up. To mount the EXT2 partition | + | The VFAT partition will be mounted by the system automagically at start-up. To mount the EXT2 partition we need to load the kernel modules, so open Xterm and, '''as root''', type: |
| - | + | ||
| - | + | insmod /mnt/initfs/lib/modules/$(uname -r)/mbcache.ko | |
| - | + | insmod /mnt/initfs/lib/modules/$(uname -r)/ext2.ko | |
| - | + | ||
| - | + | ||
[[Category:Users]] | [[Category:Users]] | ||
[[Category:Midgard wiki]] | [[Category:Midgard wiki]] | ||
[[Category:Wiki page of the day]] | [[Category:Wiki page of the day]] | ||
Revision as of 12:18, 6 July 2008
 |
This is an article from the old midgard wiki that hasn't yet been fully updated for this wiki, please update it. Please see the talk page for discussion. |
 |
WARNING: Partitioning your flash card will delete all data of the card, so be sure to back up any important data to a computer or another flash card.
Note: As of 4-28-2008 Penguinbait has made a deb package that automates all of this for you. See http://www.internettablettalk.com/forums/showthread.php?t=19639 and http://www.internettablettalk.com/forums/showthread.php?t=20534
Contents |
Get root access
See root access.
Install the needed packages and create partitions
Note: on the N800 and N810 the filesystem mounted under /media/mmc1 is the external media card and the internal card is mounted under /media/mmc2. The device that is mounted under /media/mmc1 is /dev/mmcblk1 and not mmcblk0 that is mounted under /media/mmc2. If you plan to format the external media card replace mmcblk0p with mmcblk1p.
In Xterm on your tablet, as root, run:
apt-get install e2fsprogs umount /media/mmc1 umount /media/mmc2 sfdisk /dev/mmcblk0 /dev/mmcblk0p1:1,15000,6 /dev/mmcblk0p2:15001,, /dev/mmcblk0p3: /dev/mmcblk0p4:
This will create two partitions in a 1GB flash card: the first one is VFAT (that's what number 6 means), and the second one is LINUX_83. The size of the first one is almost 480MB (that's the meaning of the 15000), and the second one is sized till the end of the card (that's what ,, means). Partitions three and four are empty. You may calculate your partitions based on my description, or read more about sfdisk. (Actually 15000 means cylinders, being each one of 32KB. So that 15000 cylinder x 32 KB/cylinder = 480MB. This means that 30000 cylinder x 32 KB/cylinder = 960MB). It will probably be easier to copy the example and just modify it slightly.
Format the partitions
Type as root:
mkdosfs /dev/mmcblk0p1 shutdown -r now
After it reboots, then open Xterm and, as root, run:
mke2fs /dev/mmcblk0p2 shutdown -r now
Mounting the partitions
The VFAT partition will be mounted by the system automagically at start-up. To mount the EXT2 partition we need to load the kernel modules, so open Xterm and, as root, type:
insmod /mnt/initfs/lib/modules/$(uname -r)/mbcache.ko insmod /mnt/initfs/lib/modules/$(uname -r)/ext2.ko