User:Mr pingu
| Line 4: | Line 4: | ||
== Repositories == | == Repositories == | ||
| - | /etc/apt/sources.list.d | + | /etc/apt/sources.list.d/hildon-application-manager.list |
<pre> | <pre> | ||
| Line 330: | Line 330: | ||
'''Chroot''' | '''Chroot''' | ||
| - | + | * When using a Maemo 5 PR1.3 qchroot /home/opt/ from the real maemo installation is mounted which results in a big mess. So we need to edit the qchroot to only mount MyDocs and not the whole /home/ folder | |
| - | <pre>/sbin/qchroot/</pre> | + | <pre>#/sbin/qchroot/ |
| + | Comment out line 82 | ||
| + | |||
| + | 81 # Do it the Fremantle way. | ||
| + | 82 # mount /dev/mmcblk0p2 "$CHROOT/home" | ||
| + | |||
| + | |||
| + | </pre> | ||
| + | |||
| + | * pymaemo-optify works not as expected while it's one file system instead of 3 partitions. | ||
| + | |||
| + | To fix this install pymaemo-optify first | ||
| + | Then mv /etc/event.d/pymaemo-optify /etc/eventd.d/pymaemo-optify.bak | ||
| + | mv /etc/init.d/pymaemo-optify /etc/init.d/pymaemo-optify.bak | ||
Revision as of 22:40, 17 April 2012
In this page I post all my snippets of tweak and mods, I made this for the reference of all tweaks I did and might need after a reflash
Repositories
/etc/apt/sources.list.d/hildon-application-manager.list
deb https://downloads.maemo.nokia.com/fremantle/ssu/apps/ ./ deb https://downloads.maemo.nokia.com/fremantle/ssu/mr0 ./ deb https://downloads.maemo.nokia.com/fremantle1.2/ovi/ ./ deb http://repository.maemo.org/extras/ fremantle-1.3 free non-free deb http://repository.maemo.org/community-testing/ fremantle free non-free deb http://repository.maemo.org/extras-devel/ fremantle free non-free deb http://my-maemo.com/repository/ fremantle user deb http://repository.maemo.org/ fremantle/sdk free deb http://repository.maemo.org/ fremantle/tools free deb http://repository.maemo.org/extras-testing/ fremantle free non-free deb http://qole.org/repository/ maemo fremantle
Setting up the device
Setting up the most important applications
apt-get update apt-get install kernel-power-flasher linux-backports-modules-power recovery-boot busybox-power powertop shortcutd tracker-cfg wpakey-editor powertop phone-control nano-opt gconf-editor procps bash3 swappolube
improve performance
- Tracker-cfg tick lowmemorymode and set throttle to 10
- Use proposed swappolube settings, except swappiness should be 50
- Turn off swap on eMMC, enable on uSD
Boot script placed in /etc/event.d/swapusd
start on started hildon-desktop stop on starting shutdown console none service script sleep 60 swapon /dev/mmcblk1p2 swapoff /dev/mmcblk0p3 end script
- Installing handy tools
apt-get install conkylayoutswitcher flashlight-applet alarmed ssh-status clipman led-pattern-editor cl-launcher macchanger hostmode-gui extkbd extmou easy-deb-chroot extended-contacts-search gconf-editor less simple-brightness-applet
- Installing some garbage I like to use
apt-get install aircrack-ng stkeys brainparty cutetube-qml dosbox supertux-stable frogatto colorflood pierogi leafpad opera filebox irggu
Personalizing the device
- Install widgets and themes
apt-get install awoken-icon-theme black-plastic-theme plastic-addon-pack-1 cal-home-widget connectnow-home-widget queen-beecon quick-launch
- Make the FMTX applet always visible
gconftool-2 -s /apps/osso/maemo-statusmenu-fmtx/always_visible -t bool true
Tweaks
- Use sudo while already root. Sometimes when I am root I still type sudo in-front of a command and it spits out the help of sudo. This will add root to sudoers and solve that. Not very useful but it's a small and convenient tweak
sudo gainroot echo "user ALL=(ALL) NOPASSWD: ALL" >> everybody.sudoers echo "root ALL=(ALL) NOPASSWD: ALL" >> everybody.sudoers mv everybody.sudoers /etc/sudoers.d update-sudoers
- My transitions.ini based on dragoss91 smoothest transitions.ini
# This file contains timings and values for transitions in hildon-desktop # duration = time in milliseconds # zoom = amount to zoom out the background. 1 = none, 0.5 = zoom to half size # radius = radius of blur (this is actually the number of blur iterations, # so the bigger the number the longer it takes) # saturation = the amount of colour left in the background (0 = grey, 1 = normal) # brightness = brightness of the background (0 = black, 1 = normal) [blur] turbo = 0 duration = 150 # Zoom out of the task navigator before it fades out # -- zoom: how much to scale the switcher when going to launcher # (the second layer of the launcher would scale it twice # as much but the switcher is hidden by that time currently) # -- zoom_for_home: how much to scale the switcher when leaving for home # -- zoom_duration: the number of miliseconds to spend on zooming # a thumbnail # -- fly_duration: how long should it take for the thumbnails to rearrange # -- notifade_in/out: time to fade the notifications # [task_nav] zoom = 0.85 zoom_for_home = 0.9 zoom_duration = 250 fly_duration = 250 notifade_in = 150 notifade_out = 150 tile_font = SwissA 15 # Blurring of the home view # -- radius: amount of iterations of blur filter to perform when not zoooming # eg. for dialogs # -- radius_more: amount of iterations of blur filter to perform when zooming # eg. for launcher/task navigator # -- saturation: saturation of the background when blurred # -- brightness: brightness of the background when blurred # -- zoom: Basic amount to scale the home view by (gets multiplied by how many # 'levels' deep the UI is - eg. launcher is one level, launcher submenu # is another) # -- zoom_applets: Amount to scale applets by when zooming out # -- zoom_on_press: set to 1 to include a zoom effect when the screen is pressed # -- parallax: Amount of parallax between desktop and widget layers when panning [home] radius = 0 radius_more = 0 saturation = 1 brightness = 1 zoom = 1 zoom_applets = 1.0 zoom_on_press = 0 parallax = 1.0 # These control the deceleration of the launcher pages. When panning freely # (decelerating) the velocity of the launcher page is adjusted by this much. # strong_deceleration_rate is effective in the bouncing zones. Uncomment if # you want faster panning. [launcher] #deceleration_rate = 0.98 #strong_deceleration_rate = 0.7 # The glow effect around launcher buttons[launcher_glow] duration_in = 100 duration_out = 200 radius = 14 brightness = 0.95 # The items below are for the transitions that are applied # to a 'page' of launcher icons # -- duration: time in ms # -- depth: amount to move icons backwards and forwards (with perspective) # this is pretty much how big or small the icons get # -- sequenced: for in and in_sub, whether icons swoop nicely in (1) # or whether they just all zoom in as one (0) # -- keyframes: A list of values that are linearly interpolated between # to produce the movement of the launcher tiles. There can # be any number of values as long as there are 2 or more. # <1 means nearer the viewer, >1 means further away # -- keyframes_label: The values used for fading in the labels. 0=transparent # 1=opaque # -- keyframes_icon: The values used for fading in the icons. 0=transparent # 1=opaque # Launcher top layer first appearing [launcher_in] duration=600 sequenced=1 depth=300 keyframes=0,0.17,0.39,0.65,0.87,1.13,1.26,1.22,1.17,1.13,1.09,1.04,1,1,1,1,1,1,1,1,1 keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1 keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1 # Launcher top layer disappearing [launcher_out] sequenced=1 keyframes=0,0.17,0.39,0.65,0.87,1.13,2,1.13,0.87,0.65,0.39,0.17,1,1,1,1,1,1,1,1,1 depth=-100 keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1 keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1 duration=100 # launcher top layer disappearing when a layer in front [launcher_out_back] duration=200 depth=50 # launch animation # duration_out - amount of time to take when fading the launcher out and application in # delay - the amount of time to wait after the window has appeared before we fade out # (this time is *included* in duration_out, so it must be <= duration_out) [launcher_launch] duration = 400 delay = 500 duration_out = 700 depth = 100 # sub-menu appearing [launcher_in_sub] duration=600 sequenced=1 depth=300 keyframes=0,0.17,0.39,0.65,0.87,1.13,1.26,1.22,1.17,1.13,1.09,1.04,1,1,1,1,1,1,1,1,1 keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1 keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1 # sub-menu disappearing [launcher_out_sub] sequenced=0 keyframes=0,0.17,0.39,0.65,0.87,1.13,2,1.13,0.87,0.65,0.39,0.17,1,1,1,1,1,1,1,1,1 depth=-100 keyframes_label=0,0,0,0,0,0,0,0,0,0,0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1 keyframes_icon=0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1,1,1,1,1,1,1,1,1,1 duration=100 # main disappearing when sub-menu appears [launcher_back] duration=150 depth=-450 # main appearing when sub-menu disappears [launcher_forward] duration=150 depth=-450 # Screen rotation transition # duration_in = time for rotation before blanking # duration_out = time for rotation after blanking # damage_timeout = in the rotation transition, the amount of milliseconds to # leave after we get a damage event before we transition back # from blanking. # damage_timeout_max = maximum amount of time we may wait if we keep getting # damage events. # angle = rotation angle for each transition, in degrees. Ideally this is set # so that the screen looks like it keeps turning at the same speed # during blanking. 0 is none, 90 degrees is side-on [rotate] duration_in = 150 duration_out = 150 damage_timeout = 0 damage_timeout_plus = 0 damage_timeout_max = 0 angle = 0 # changed from 100 in order to reduce jerkiness of transition (also changed the # fade-out so it doesn't fade to black completely) # App close transition [app_close] duration = 380 # Popup for dialogs and status menu [popup] duration_in = 250 duration_out = 250 # Fade in for banners # _alpha specifies the final transparency of various things # currently only banner_note and info_note are supported [fade] duration_in = 200 duration_out = 500 banner_note_alpha = 0.85 info_note_alpha = 0.85 # Transition for notification previews [notification] is_cool = 0 duration_in = 400 duration_out = 450 # Sliding subview window transition [subview] duration_in = 250 duration_out = 250 [loading_timeout] # This is multiplied by the load average to find the timeout # in seconds. before "Unable to load" is displayed. There is # a minimum of 10s. load_average_factor = 4.5 # Edit mode configuration [edit_mode] snap_grid_size=8 # Set to 0 if snap to grid should be only happen when widget is released snap_to_grid_while_move = 1 ## # Special tweaks (a restart might be required) ## [thp_tweaks] # Blurless desaturation (0 = default, 1 = MeeGo/Symbian-style) blurless = 1 # saturation value for blurless (0 = no color, 1 = full color) blurless_saturation = 0 # [home] brightness, is used for the brightness # Bigger task switcher (0 = default, 1 = single column, 2 = two columns) taskswitcher = 0 # Rotation around the Z axis (0 = rotate around X/Y, 1 = rotate around Z) zaxisrotation = 0 # Forced app auto-rotation (0 = default, 1 = auto-rotate every app) forcerotation = 0 # Popup feedback using the "tactile" utility (0 = disabled, 1 = enabled) # You need to install "tactile" from the maemo.org repositories for this tactilepopups = 0 # Lock application window in landscape mode. # Example: blacklist = mediaplayer osso-xterm worldclock image-viewer camera-ui whitelist = osso-browser tablet-browser-ui rtcom-messaging-ui leafpad
Chroot
- When using a Maemo 5 PR1.3 qchroot /home/opt/ from the real maemo installation is mounted which results in a big mess. So we need to edit the qchroot to only mount MyDocs and not the whole /home/ folder
#/sbin/qchroot/ Comment out line 82 81 # Do it the Fremantle way. 82 # mount /dev/mmcblk0p2 "$CHROOT/home"
- pymaemo-optify works not as expected while it's one file system instead of 3 partitions.
To fix this install pymaemo-optify first Then mv /etc/event.d/pymaemo-optify /etc/eventd.d/pymaemo-optify.bak mv /etc/init.d/pymaemo-optify /etc/init.d/pymaemo-optify.bak