Editing Bluetooth PAN

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

This allows you to use your Maemo device to use [[Bluetooth]] PAN to connect via another device to another network such as the Internet.

The Connection manager is used for this purpose, exactly the same way as you connect to a WLAN network or to a cell phone dial-up connection ([[Bluetooth DUN]]). Most Windows Smartphones use this method of connection when used as a modem via Bluetooth.

If you have [[Nokia N900]] you may instead use it as PAN server to allow an other device such as a Nokia N8x0 to utilize Bluetooth PAN.

== Installing ==

For the [[Nokia N900]] pan is disabled by default.
To enable it, edit /etc/bluetooth/main.conf and remove ''network'' from the disabled plugins
 [General]
 # List of plugins that should not be loaded on bluetoothd startup
 DisablePlugins = <s>network</s>,input,hal
''libicd-network-null'' is also recommended for using internet over bluetooth
 apt-get install libicd-network-null

For other devices you need to install maemo-pan through the Application manager. You may need to restart your tablet after installation in order to force a dependency on maemo-pan (libicd-network-dummy package) being loaded.

Tap on the Connectivity icon in your status bar and either "Select a connection" or "Change connection" to see a list of available network access points. You should see one called "Dummy Network" (this name will likely change in future versions of maemo-pan, see [https://bugs.maemo.org/show_bug.cgi?id=3306 bug #3306] for details).

To connect to the Internet through this connection you must make sure the "Internet Connection Sharing" application is running on your phone and has a connection. Select the "Dummy Network" from the tablet network list and enjoy anywhere Internet!

==Sharing your connection over bluetooth [n900]==

Using udev to automatically setup internet connection sharing over bluetooth.

A kernel with iptables support is needed,

[[Kernel Power]] is the recommended way to achieve this. see [[Kernel Power]] for installation details.

The default kernel with [[Community_SSU/Thumb|CSSU-thumb]] is also suitable.

Install the ''iptables'' package:
 apt-get install iptables

create the following 2 files:

/etc/udev/rules.d/98-bnep0.rules:
 ACTION=="add", SUBSYSTEM=="net",  KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"
 ACTION=="remove", SUBSYSTEM=="net",  KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"

/etc/udev/bluenet.sh:
 #! /bin/sh
 if [ $ACTION = "add" ]; then 
 	echo 1 > /proc/sys/net/ipv4/ip_forward
 	iptables -t nat -A POSTROUTING ! -o lo -j MASQUERADE
 	ifconfig bnep0 192.168.3.1
 	ifconfig bnep0 up
 	/usr/sbin/dnsmasq -I lo -z -a 192.168.3.1 -F 192.168.3.64,192.168.3.127 -x /var/run/dnsmasq.pid.bnep0
 else
 	iptables -t nat -D POSTROUTING ! -o lo -j MASQUERADE
 	if [ -f /var/run/dnsmasq.pid.bnep0 ]; then
 		DNSMASQ_PID=`cat /var/run/dnsmasq.pid.bnep0`
 		rm -f /var/run/dnsmasq.pid.bnep0
 		kill $DNSMASQ_PID
        fi
 fi
then set ''/etc/udev/bluenet.sh'' as executible:
 chmod +x /etc/udev/bluenet.sh

now whenever an authorised remote device makes a bluetooth pan (nap) connection iptables and dnsmasq are setup to allow that device access to the phones network.
TODO: when no internet connection is active ask to set it up

=== Using PAN on older releases ===

It is possible to use PAN to share Internet connections via PAN between two Nokia devices. However, on older devices it is recommended to use [[Bluetooth DUN]] (dial-up networking), since this is the normal method which smartphones use to share Internet access over Bluetooth.

[[Category:Bluetooth]]
[[Category:Connectivity]]
[[Category:Power users]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/Bluetooth_PAN"

@@ Line 1: / Line 1: @@
-Personal Area Networking Profile of Bluetooth protocol allows you to connect your Maemo device via another device to another network such as the Internet.
+This allows you to use your Maemo device to use [[Bluetooth]] PAN to connect via another device to another network such as the Internet.
 The Connection manager is used for this purpose, exactly the same way as you connect to a WLAN network or to a cell phone dial-up connection ([[Bluetooth DUN]]). Most Windows Smartphones use this method of connection when used as a modem via Bluetooth.
@@ Line 5: / Line 5: @@
 If you have [[Nokia N900]] you may instead use it as PAN server to allow an other device such as a Nokia N8x0 to utilize Bluetooth PAN.
-== Bluetooth NAP ==
+== Installing ==
-NAP stands for Network Access Point. It's a PAN profile for serving incoming connections.
-=== Installing ===
 For the [[Nokia N900]] pan is disabled by default.
@@ Line 25: / Line 21: @@
 To connect to the Internet through this connection you must make sure the "Internet Connection Sharing" application is running on your phone and has a connection. Select the "Dummy Network" from the tablet network list and enjoy anywhere Internet!
-===Sharing your connection over bluetooth [n900]===
+==Sharing your connection over bluetooth [n900]==
-Using [http://maemo.org/packages/view/genwall genwall] for internet connection sharing over bluetooth, follow:([http://talk.maemo.org/showpost.php?p=1454885&postcount=62 Linux]/[http://talk.maemo.org/showpost.php?p=1454885&postcount=63 Windows]).
+Using udev to automatically setup internet connection sharing over bluetooth.
-Using udev to automatically setup internet connection sharing over bluetooth comes now.
@@ Line 73: / Line 65: @@
-=== Using PAN on older maemo5 pr3 ===
+=== Using PAN on older releases ===
-In terminal cd /etc/udev/ then write vi bluenet.sh
-it will open
-/etc/udev/bluenet.sh press R and paste that code:
- #!/bin/sh
- if [ $ACTION = "add" ]; then
- # by 9000 @ talk.maemo.org
- # Prompt you to select the Internet connection. You may choose gprs or wifi
- run-standalone.sh dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_u
- # Selecting and establishing connection takes time
- sleep 2
- # Verbose mode. You can remove it when you're using widget to activate this script
- set -x
- IP_ADDR="192.168.3.1"
- NETMASK="255.255.255.0"
- DHCP_RANGE="192.168.3.60,192.168.3.70"
- RUNFILE="/var/run/btpan_tethering.pid"
- DNSMASQ="/usr/sbin/dnsmasq"
- # Load modules
- modprobe ipt_MASQUERADE
- # flush old rules
- iptables -F
- iptables -t nat -F
- iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
- # forward IPs
- echo 1 > /proc/sys/net/ipv4/ip_forward
- # Setup bnep0
- ifconfig bnep0 down
- ifconfig bnep0 up
- ifconfig bnep0 $IP_ADDR netmask $NETMASK up
- # Setup DNS and DHCP
- start-stop-daemon -S -p $RUNFILE -m -b -x $DNSMASQ -- -k -I lo -z -a $IP_ADDR -F $DHCP_RANGE -b
- run-standalone.sh dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:'Bluetooth PAN Activated'
- fi
-press esc, then :w to save file and :q to quit
-set ''/etc/udev/bluenet.sh'' as executible:
- chmod +x /etc/udev/bluenet.sh
-cd /etc/udev/rules.d/
-command vi 98-bnep0.rules and press R
-/etc/udev/rules.d/98-bnep0.rules copy that txt and paste it, esc and Save it with command :w quit vi editor :q :
- ACTION=="add", SUBSYSTEM=="net",  KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"
 It is possible to use PAN to share Internet connections via PAN between two Nokia devices. However, on older devices it is recommended to use [[Bluetooth DUN]] (dial-up networking), since this is the normal method which smartphones use to share Internet access over Bluetooth.
-== Bluetooth PANU ==
-PANU is a client role for the PAN profile. Here's the way how to make it work.
-Install bluez-test from SDK tools repository:
- echo 'deb http://repository.maemo.org/ fremantle/tools free non-free' >> /etc/apt/sources.list
- apt-get install bluez-test
-You may now remove or comment SDK repository:
- perl -pi -e 's,^(deb http://repository.maemo.org/ fremantle/tools .*)$,#\1,' /etc/apt/sources.list
-And now you can use your N900 device as a bluetooth networking client. Below are some commands.
-Connect to another bluetooth device that provides NAP service:
- pand -c <bdaddr>
-List connections:
- pand -l
-Remove connection:
- pand -k <bdaddr>
 [[Category:Bluetooth]]
 [[Category:Connectivity]]
 [[Category:Power users]]

Personal tools

Navigation

Views

Editing Bluetooth PAN