Editing Bluetooth PBAP

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

'''Original page for older versions of obexd was moved to [[Bluetooth PBAP pre 0.46]]'''

The following is based on two threads on talk.maemo.org and can be applied only on '''obexd version 0.46''' (and maybe later):

* [http://talk.maemo.org/showthread.php?t=36272 "Car kit can not access contact information"]
* [http://talk.maemo.org/showthread.php?t=59114 Announce - Bluetooth PBAP and IrMC / Carkit support is coming to N900...].

You can contact current  maintainer (luf) on IRC #maemo-ssu or in the second TMO thread to get support and share your experiences with  this solution there as well!!!
 
== General Information ==

=== PBAP ===

The Bluetooth Phone Book Access Profile (PBAP) allows to exchange Phone Book objects and call history between carkits and mobile devices. In other words, PBAP profile gives your car unit read access to your mobile phone book (to be exact: to both, the phonebook stored on SIM card and the phone book stored on internal memory. But for the N900 only second one is relevant). You're also able to browse call history using car unit aswell.

Described in a more specific way, whenever a connection between your carkit and your PBAP enabled phone is established, your phone book will be transfered to your carkit automatically. What happens from now with the transfered phone book of course depends on the features of your carkit. Typical use cases are browse and dial (voice-dial if supported by carkit) your contacts and show caller names for incoming calls. With an integrated In-Car Infotainment/Phone/Navigation/Whatever system it is even possible to use the contacts addresses as target for the navigation system.

By default N900 does NOT support PBAP and thus the in-car use cases described above are either not possible or require manual workarounds as the in other threads described "Petrovich workaround" (manual sending of vCards via Bluetooth) or OPP (Object Push Profile - A Bluetooth profile that enables a Bluetooth device to transfer (push) an object (e.g. contact) to another Bluetooth device).

=== IrMC ===

This project also aims to provide IrMC support. IrMC is another method to transfer the phone book to e. g. a car kit via Bluetooth which is by default not supported by N900.

=== MAP ===

The Message Access Profile (MAP) allows to exchange messages objects between carkits and mobile devices. Now only SMS (GSM) are supported. In other words, MAP profile gives your car unit read access to your SMS.

MAP is not supported by default by N900.

Here comes the good news: '''Now you can have PBAB and IrMC and MAP on your N900 !!!'''

== Credits ==

Credits for the achieved so far go to those who contributed in the old thread [http://talk.maemo.org/showthread.php?t=36272 "Car kit can not access contact information"] as well as the new thread [http://talk.maemo.org/showthread.php?t=59114 Announce - Bluetooth PBAP and IrMC / Carkit support is coming to N900...]:

Especially the developers: drdrewusaf, tuxy, jarmo2, hschmitt, Ossman, mirakels..., but of course also all the others who helped with testing and troubleshooting!

== Disclaimer ==

Before you start playing with your phone, you should check if your carkit does support PBAP / IrMC / MAP.

If it does not, this solution can not help you - Sorry!

''There is a TODO to write support for AT commands but don't hold your breath.''

(Note: Carkits older than 2007 probably do NOT support PBAP)

==''' Known issues / problems '''==

* Sometimes contacts synced from other devices (e.g. using PC Suite) with special characters in names/details are not transferred (correctly). Recreating these contacts on your N900 ''should'' solve this issue. - ''I don't know if this is still valid. Please report it if this problem persist''
* MAP implementation in N900 doesn't support neither notifications nor the push methods yet

==''' Installation Guide '''==

This installation is based on obexd-0.46 and provides
* PBAP support
* IrMC support
* MAP support
* PC Suite support
* Multiple phone numbers per contact
* Skip SIM contact requests (means contacts are not shown twice)
* vCards are separated correctly with CRLF between ENV:VCARD and BEGIN:VCARD.

=== CSSU-testing (the easiest way) ===

Unfortunately obexd 0.46 isn't in stable branch of CSSU so you can obtain it easily only from CSSU-testing. Please read carefully CSSU information and follow CSSU installation instructions if you want to obtain obexd. You can find all neccesary information on [http://wiki.maemo.org/Community_SSU CSSU page]

Downsides:
* CSSU-T has longer release cycle so it doesn't contain the newest version.
* There is no map support in latest CSSU-T
* It contains configuration bug which prevents synchronize contacts using SyncML over BT. You need to disable ''syncevolution'' plugin to fix the problem (see below in Configuration chapter).
* The last known issue in CSSU-T is missing dependency (only affects call history feature). You need to install ''rtcom-eventlogger-async'' package (using HAM or FAP or apt).

=== Manual installation ===

This needs using command line (e.g. xterm).

* Donwload following packages (version of your choise - recommended is the latest one) from [http://merlin1991.at/~luf/obexd/ http://merlin1991.at/~luf/obexd/]:
** obexd
** librtcom-eventlogger1-async
** rtcom-eventlogger-async
** evolution-data-server-addressbook *)
** libebook *)
** libedata-book *)
** libedataserver *)
*: ''*) It's recommended to also upgrade evolution-data-server to avoid empty vcard fields.''

* Place them in a folder on the N900, say <code>/home/user/mypackages</code>

* As root run (replace /home/user/mypackages with the path to the folder where you placed the files):
<source lang="bash">
cd /home/user/mypackages
dpkg -i *.deb</source>

* Reboot the phone.

Test and ENJOY - hopefully ;-)

'''-> Please share your results !!!'''

== Configuration ==

This is handy for some configuration fixes and debugging.

The obexd is started under user '''user''' using D-Bus (no idea why because it doesn't restart when fail). So the command to start is defined in:

/usr/share/dbus-1/services/obexd.service

<source lang="properties">
[D-BUS Service]
Name=org.openobex
Exec=/usr/lib/obex/obexd --nodaemon --noplugin=mas,syncevolution --symlinks --root .obex-root --root-setup /usr/bin/obex-root-setup --capability '!/usr/bin/gen-obex-capability.sh'
</source>

: ''Note: this is fixed version for CSSU-T version of obexd''

<source lang="properties">
[D-BUS Service]
Name=org.openobex
Exec=/usr/lib/obex/obexd --nodaemon --debug='*' --noplugin=syncevolution --symlinks --root .obex-root --root-setup /usr/bin/obex-root-setup --capability '!/usr/bin/gen-obex-capability.sh'
</source>

: ''Note: this is for debugging due to some troubleshooting or recognizing what Profile is used (PBAP or IrMC)''

Some useful arguments:
<source lang="bash">
  -d, --debug=DEBUG           Enable debug information output
  -P, --noplugin=NAME,...     Specify plugins not to load
</source>
: ''The most used DEBUG is '*' (--debug='*') to debug everything''
:* ''plugin names:''
:** ''ftp - File Transfer Profile for exchanging files''
:** ''irmc - IrMC profile for synchronizing contacts and call history''
:** ''map - Message Access Profile for SMS''
:** ''opp - Object Push Profile for pushing file to the N900''
:** ''pbap - Phone Book Access Profile for contacts and call history''
:** ''pcsuite - Nokia PC Suite services''
:** ''syncevolution - SyncML obex profile conflicting with nokia SyncML'' - should be disabled

All possibilities:
<source lang="bash">
$ /usr/lib/obex/obexd --help
Usage:
  obexd [OPTION...]

Help Options:
  -?, --help                  Show help options

Application Options:
  -n, --nodaemon              Do not run as daemon in background
  -d, --debug=DEBUG           Enable debug information output
  -r, --root=PATH             Specify root folder location. Both absolute and relative can be used, but relative paths are assumed to be relative to user $HOME folder
  -S, --root-setup=SCRIPT     Root folder setup script
  -l, --symlinks              Allow symlinks leading outside of the root folder
  -c, --capability=FILE       Specify capability file, use '!' mark for scripts
  -a, --auto-accept           Automatically accept push requests
  -p, --plugin=NAME,...       Specify plugins to load
  -P, --noplugin=NAME,...     Specify plugins not to load
</source>

== Troubleshooting ==

You should obtain debug log using syslog and also you can sniff the communication using hcidump.

=== Get debug messages ===

For obtain debug information you need to enable obexd syslog debugging messages:

# Install sysklogd package. As root run <source lang="bash">apt-get install sysklogd</source>
#* Temporary:
#*# Kill running obexd process. As user run <source lang="bash">killall obexd</source>
#*# Get the command from ''/usr/share/dbus-1/services/obexd.service'' - line Exec (only the part behind =)
#*# Restart obexd with enabled debug option as user. You need to add ''--debug='*' '' (see Configuration chapter for example)
#* Permanent till next upgrade of obexd:
#*# Add the ''--debug='*' '' option into the ''/usr/share/dbus-1/services/obexd.service'' file (see Configuration chapter for example)
#*# Reboot N900
# Make you test case
# Get the debug from syslog
#* syslogd will create a file <code>/var/log/syslog</code>
#* After your test copy this file to some other location (do not delete the original) and edit out the relevant part
# Uninstall sysklogd package. As root run <source lang="bash">apt-get remove sysklogd</source>

=== Get the communication dump ===
   
First you need to add the developer repository, see [[Documentation/devtools/maemo5#Installation the devtools installation instructions]].

After adding the repository, run the following command as root:

<source lang="bash">
apt-get install bluez-hcidump</source>

OR if the above fails, try the following steps:

# Download the deb-package containing hcidump from here: [http://repository.maemo.org/pool/fremantle/free/b/bluez-hcidump/bluez-hcidump_1.42-0maemo2_armel.deb hcidump download]
# Unpack it (alien on Linux, 7-zip on Windows)
# Copy <code>/usr/sbin/hcidump</code> to the N900
# In xTerm as root:<source lang="bash">chmod a+x /usr/sbin/hcidump</source>

=== Usage of hcidump ===

For testing/debugging with hcidump, run the following command (where "/some/path/somefilename" is a real path and any name you choose for your output file.)

<source lang="bash">
hcidump -w /some/path/somefilename
</source>

right before turning your head unit/car on. Then, do what you would normally do to get contacts to show up and wait for it to finish/fail. Then, press ctrl+c on the phone to exit hcidump. Finally, you can view the output/dump file with Wireshark or upload your dump files so we can see what's going on.

'''-> Please share your results !!!'''

== Downgrade to Original State ==

To reinstall the original packages you can use several ways.

=== Using apt ===

As root run:

<source lang="bash">
apt-get update
apt-get install libopenobex1=1.4-0maemo3+0m5
apt-get install obexd=0.18-0maemo6+0m5
</source>

Reboot the phone.

=== Manual dpkg ===

* Download these 2 .deb packages: <br/>
*# [http://repository.maemo.org/pool/fremantle/free/libo/libopenobex1/libopenobex1_1.4-0maemo3+0m5_armel.deb libopenobex1 1.4]
*# [http://repository.maemo.org/pool/fremantle/free/o/obexd/obexd_0.18-0maemo6+0m5_armel.deb obexd 0.18]

* Place them in a folder on the N900, say <code>/home/user/mypackages</code>

* As root run (replace /home/user/mypackages with the path to the folder where you placed the files):
<source lang="bash">
apt-get remove openobex-apps
cd /home/user/mypackages
dpkg -i *.deb</source>

* Reboot the phone.

==''' Supported Carkits '''==

So far, successful phonebook transfers were reported for the following carkits:

(If you are able to successfully transfer your phonebook to any carkit not listed here, please let us know or just add to following list!):

==='''Via PBAP:'''===

====Built-In Carkits:====
=====Acura=====
* Acura TL -2010- SH-AWD w/Technology Package

=====Audi=====
* Audi -2009- with RNS-E
* Audi A3 -2009- (Facelift) with Radio Concert and bluetooth preparation
* Audi A3 -2010- with RNS-E and bluetooth preparation
* Audi A3 -2011- with Radio Concert and bluetooth preparation
* Audi A4 -2010- with MMI (usable, BUT reads double entries, looks like phonebook is both on N900 and on SIM-card)

=====BMW=====
* BMW 1series -2008- (E81/E82/E87/E88)
* BMW 1series -2010- (E81/E82/E87/E88)
* BMW 3series -2007- (E90/E91/E92/E93)
* BMW 3series -2008- (E90/E91/E92/E93)
* BMW 3series -2009- (E90/E91/E92/E93)
* BMW 3series -2011- (E90/E91/E92/E93)
* BMW 5series -2009- (E60/E61)
* BMW 5series -2010- (F10/F11)
* BMW X1 -2010- (E84)
* BMW X5 -2007- (E70)

=====Chrysler=====
* Town and Country 2010 (Limited)

=====Citroen=====
* Citroen C5 (2006) with RD4 audio / Bluetooth system (phone book access works and outgoing calls can be made, but no caller ID and no phone number is shown on incoming calls; missed/dialed/received lists aren't available, either)
* Citroen (Model unknown)
* Citroen DS3 (2011) with MyWay audio/navigation/Bluetooth system (Phone book access direct from phone available, outgoing calls can be made, caller ID with phone number is shown on incoming calls, missed/dialed/received lists are available but this are only the calls that were made whilst connected with the MyWay-system)

=====Dodge=====
* Durango 2012 with RHR UConnect (Citadel)

=====Fiat=====
* Fiar Scudo Panorama - 2007 - car kit bluetooth

=====Ford=====
* Ford Mondeo -2007- Navigationsystem NX with Touchscreen
* Ford Galaxy -2010- Navigation with Touchscreen
* Ford Focus -2010- with Ford 6000CD
* Ford Escape -2011- Limited with Touchscreen
* Ford Mondeo -2011- Navigationsystem Travelpilot NX with Touchscreen

=====Honda=====
* Honda Accord -2009- (EU) HFT system with SatNav
* Honda CRV -2010- (EU) HFT system with SatNav
* Honda Civic 2012 EX,Si. HandsFreeLink HFL

=====Hyundai=====
* Hyundai Sonata -2011- SE Stock Bluetooth

=====Infinity=====
* Infinity FX37 -2010-

=====Land Rover=====
* Land Rover Discovery 3 -2007-

=====Lexus=====
* IS 220d -2011-

=====Mercedes=====
* Mercedes E-class > 09/2010- Audio 50 APS
* Mercedes E-class > 09/2010- Audio 20
* Mercedes C-class > 03/2011- all
* Mercedes GLK- class >09/2010- Audio 50 APS and Audio 20

=====MINI=====
* MINI -2010- (R55/R56/R57)

=====Nissan=====
* 370Z -2011- HD-Navi

=====Opel=====
* Insignia -2009- DVD800 (Same as [http://wiki.maemo.org/Bluetooth_PBAP#Vauxhall Vauxhall])

=====Peugeot=====
* Peugeot 207 GTI 2010
* Peugeot 307 (2007) - Default RD4 Audio Equipment
* Peugeot 3008 - Built-In NAV Carkit
* Peugeot 5008 -2010- Connect Nav carkit
* Peugeot 407SW 2008

=====Renault=====
* Renault Megane 3 Coupé / Hatchback - 3D Sound by Arkamys
* Renault Scenic XMOD Live (2012)

=====SAAB=====
* SAAB 9-3 -2011- with built-in TEL4

=====Seat=====
* Seat Exeo -2009-

=====Skoda=====
* Skoda Oktavia -2010-
* Skoda Octavia -2010- with built-in "Bolero" radio/CD player and BT car kit
* Skoda Oktavia 04.2008 does not work with latest instructions
* Skoda Octavia 06.2010 mit Amundsen und Skoda BT (nur Phonebook funktioniert good)
* Skoda Superb -2011- with built-in "Columbus" and BT car kit without rSAP

=====Toyota=====
* Toyota Prius MY -2010-

=====Vauxhall=====
* Vauxhall (Model unknown)
* Vauxhall (Insignia - DVD 800 Navi)

=====Volvo=====
* Volvo S60 -2011- (BT version 5.00.17H)
* Volvo V60 -2011- (BT version 5.00.17H)
* Volvo XC60 2011- (BT version 5.00.17Q - pair again after installation deb-files)
* Volvo XC60 2012- (BT version 5.00.17Q - pair again after installation deb-files)

=====VW=====
* VW Passat -2008- with RNS 300 and Bluetooth Touch Adapter
* VW Golf -2011- with 9ZB Bluetooth and RNS-510 navigation
* VW Golf Variant -2008- with RNS 300 and Bluetooth Touch Adapter
* VW Golf -2012- TDI with RNS 315 navigation (tech package build option in US)
* VW New Beetle 2012 - TSI with RNS 315 navigation (EU/The Netherlands)

====Stand alone devices:====
=====Alpine=====
* Alpine CDE-103BT (has an inbuilt parrot module)

=====Blaupunkt=====
* Blaupunkt Hamburg MP68

=====Bury=====
* Bury AD9060
* Bury CC9060 plus
* Bury CC9056

=====Garmin=====
* Garmin Nuvi 715
* Garmin Nuvi 265w
* Garmin Zumo 660

=====JVC=====
* JVC KD-R811

=====Kenwood=====
* Kenwood DNX6140
* Kenwood DNX9960
* Kenwood HD942U (with KCA-BT200 bluetooth module)
* Kenwood KDC-BT50U (upgrade Kenwood-BT-Firmware to 3.30.4 for more reliability)

=====Navigon=====
* Navigon 8410

=====Nokia=====
* Nokia CK-15W

=====Parrot=====
* Parrot MKi9000 v1.70
* Parrot MKi9100
* Parrot MKi9200
* Parrot CK3100
* Parrot CK3200LS
* Parrot CK3200 LS-COLOR
* Parrot LG 3200
* Parrot LS 3200
* Parrot Minikit Slim

=====Pioneer=====
* Pioneer AVH-3200BT
* Pioneer AVH-P8400BH
* Pioneer DEH-6200BT
* Pioneer DEH-P7100BT
* Pioneer DEH-7300BT
* Pioneer MVH-8200BT

=====Sony=====
* Sony MEX-BT3900U
* Sony DSX-S300BTX

==='''Via IrMC'''===
====Built-In Carkits:====
* Citroen C4 hatch 2010
* Citroen C4 picasso
* Renault Megane Scenic 2010

====Stand alone devices:====
* Kenwood DNX6140
* Parrot MK6000

[[Category:N900]]
[[Category:Bluetooth]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/Bluetooth_PBAP"

Personal tools

Navigation

Views

Editing Bluetooth PBAP

@@ Line 61: / Line 61: @@
 * Multiple phone numbers per contact
 * Skip SIM contact requests (means contacts are not shown twice)
-* vCards are separated correctly with CRLF between END:VCARD and BEGIN:VCARD.
+* vCards are separated correctly with CRLF between ENV:VCARD and BEGIN:VCARD.
 === CSSU-testing (the easiest way) ===
- please add correct version number of CSSU-T, or at very least date, so reader has a chance to decide if the info is still valid
 Unfortunately obexd 0.46 isn't in stable branch of CSSU so you can obtain it easily only from CSSU-testing. Please read carefully CSSU information and follow CSSU installation instructions if you want to obtain obexd. You can find all neccesary information on [http://wiki.maemo.org/Community_SSU CSSU page]
@@ Line 71: / Line 71: @@
 * There is no map support in latest CSSU-T
 * It contains configuration bug which prevents synchronize contacts using SyncML over BT. You need to disable ''syncevolution'' plugin to fix the problem (see below in Configuration chapter).
-* The last known issue in CSSU-T is missing dependency (only affects call history feature). You need to install ''rtcom-eventlogger-async'' package (using HAM or apt).
+* The last known issue in CSSU-T is missing dependency (only affects call history feature). You need to install ''rtcom-eventlogger-async'' package (using HAM or FAP or apt).
 === Manual installation ===
@@ Line 77: / Line 77: @@
 This needs using command line (e.g. xterm).
-* Download following packages (version of your choice - recommended is the latest one) from [http://merlin1991.at/~luf/obexd/ http://merlin1991.at/~luf/obexd/]:
+* Donwload following packages (version of your choise - recommended is the latest one) from [http://merlin1991.at/~luf/obexd/ http://merlin1991.at/~luf/obexd/]:
 ** obexd
 ** librtcom-eventlogger1-async
-** rtcom-eventlogger-async (even if a car kit asks for call history, the N900 won't reply if this package is missing, so no call history would be transferred)
+** rtcom-eventlogger-async
 ** evolution-data-server-addressbook *)
 ** libebook *)
@@ Line 175: / Line 175: @@
 #* Temporary:
 #*# Kill running obexd process. As user run <source lang="bash">killall obexd</source>
-#*# Get the necessary command line from file ''/usr/share/dbus-1/services/obexd.service'', line "Exec=" (only the part behind Exec=) -> it's probably best to put it in a shell script, this also enables you to quickly switch between f.e. IrMC and PBAP test cases using dedicated scripts
+#*# Get the command from ''/usr/share/dbus-1/services/obexd.service'' - line Exec (only the part behind =)
 #*# Restart obexd with enabled debug option as user. You need to add ''--debug='*' '' (see Configuration chapter for example)
 #* Permanent till next upgrade of obexd:
@@ Line 277: / Line 277: @@
 * BMW X1 -2010- (E84)
 * BMW X5 -2007- (E70)
-* BMW 3 Series -2012- (E92) - All works, except transfering photo contact.
 =====Chrysler=====
@@ Line 317: / Line 315: @@
 =====Lexus=====
 * IS 220d -2011-
-=====Mahindra and Mahindra=====
-XUV 5OO (Only phone book Not call logs and SMS)
 =====Mercedes=====
-* Mercedes S-class     W 221 provided with entertainment/dialog system (standard equipment)
 * Mercedes E-class > 09/2010- Audio 50 APS
 * Mercedes E-class > 09/2010- Audio 20
@@ Line 336: / Line 330: @@
 =====Opel=====
 * Insignia -2009- DVD800 (Same as [http://wiki.maemo.org/Bluetooth_PBAP#Vauxhall Vauxhall])
-* Zafira B -2010- CD 30 MP3
 =====Peugeot=====
@@ Line 344: / Line 337: @@
 * Peugeot 5008 -2010- Connect Nav carkit
 * Peugeot 407SW 2008
-* Peugeot 208 active eHDi 2012
 =====Renault=====
@@ Line 385: / Line 377: @@
 ====Stand alone devices:====
 =====Alpine=====
-* Alpine CDE-103BT (has an inbuilt Parrot module)
+* Alpine CDE-103BT (has an inbuilt parrot module)
-* Alpine CDA-137BTi (has an inbuilt Parrot Bluetooth Plus module) (FW 1.14) (no PB sync over PBAP, use IrMC!)
 =====Blaupunkt=====
@@ Line 434: / Line 425: @@
 * Pioneer DEH-7300BT
 * Pioneer MVH-8200BT
-* Pioneer AVH-X5800DAB
 =====Sony=====
@@ Line 447: / Line 437: @@
 ====Stand alone devices:====
-* Alpine CDA-137BTi (has an inbuilt Parrot Bluetooth Plus module) (FW 1.14) (no PB sync over PBAP, use IrMC!)
 * Kenwood DNX6140
 * Parrot MK6000
-* Supertooth Voice
 [[Category:N900]]
 [[Category:Bluetooth]]