Editing Desktop Command Execution Widget scripts
Warning: You are not logged in.
Your IP address will be recorded in this page's edit history.
Warning: This page is 35 kilobytes long; some browsers may have problems editing pages approaching or longer than 32kb. Please consider breaking the page into smaller sections.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 370: | Line 370: | ||
CPU's thermal sensors are not accessible, but there is one near the battery. This commands displays output of its readings, but IT IS NOT RELIABLE, because it doesn't always work. Sometimes the value returned is wrong or constant. It needs to be tested further. | CPU's thermal sensors are not accessible, but there is one near the battery. This commands displays output of its readings, but IT IS NOT RELIABLE, because it doesn't always work. Sometimes the value returned is wrong or constant. It needs to be tested further. | ||
- | cat /sys/devices/platform/omap34xx_temp/temp1_input | awk ' | + | cat /sys/devices/platform/omap34xx_temp/temp1_input | awk '/[0-9]+/ {print $1" °C"}' |
There is a working way now to read the correct temperature, but it is working only on a newer titan's kernels (normal, overclock, undervoltage). The bq27x00_battery module has to be loaded first. | There is a working way now to read the correct temperature, but it is working only on a newer titan's kernels (normal, overclock, undervoltage). The bq27x00_battery module has to be loaded first. |
Learn more about Contributing to the wiki.