Editing Flopswap

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

=Introduction=

FlopSwap is a Swap management Tool for N900.

It features as a GUI to refresh your devices Linux Swap to speed up your VM.

===Partition Requirements===

Before FlopSwap will function your micro SD card needs setting up with two equally sized linux-swap partitions and one on the device (backup).

If you have not removed the swap partition on your device the later will already be working.

===Fragmentation===

Swap fragmentation starts to occur, when total number of megabytes written during swap's life time exceed it's maximum size. Until that, swap is written in a sequential manner.
Blocks that are no longer needed are marked as free, but never used.
 
After reaching end of swap space, previously used and freed blocks are rewritten, using new content. This means no longer writing sequentially causing massive slowdowns, to an already sluggish swap; when compared to RAM.

A workaround to this is to disable and enable swap again - linuxswap filesystem content doesn't live through restarts, and once re-enabled, is written sequentially again.

FlopSwap does this by switching to a fresh swap space on every "reswap".
By doing this it saves moving swap to B and back again, hence "FlopSwap".

===Main Swap Partition on Micro SD===
Putting the Main Swap space on your microSD saves the device from I/O conflicts between swap and /opt requests. 
Also flash based devices don't handle simultaneous, autonomous requests very well. 
Another huge advantage is that it reduces a large amount of wear & tear from the devices non-replaceable flash device, at expense of a cheap and replaceable microSD card.

===More===

More information on the package can be found ...

[http://talk.maemo.org/showthread.php?t=87985 talk.maemo.org thread FlopSwap ]

[http://maemo.org/packages/view/Flopswap Package Page]

==Installation==

The latest versions can be found in the [[Extras-Devel]] repository and can be installed using the N900 Application Manager (HAM).

==Operation==

'''''There are four main operations:-'''''

*Fresh Swap
This swaps to a fresh SD swap space from either the device or another SD swap.

*Swap to Device
This moves the swap space to the device so the back cover can be removed.

*Show Current
Shows currently active swap(s) (cat /proc/swaps)

*Check Usage
Shows current fresh swap usage percentage via hildon banner and recommends fresh swap at your selected threshold via hildon dialog.

'''''Settings'''''

* Enable FlopSwap
This setting should be enabled to use FlopSwap.
It is provided to disable starting on uSD swap for whatever reason.

* Threshold for Swap Used Warning
This sets the Percentage of used Fresh Swap before the warning message is shown.

==Bugs==

Please report bugs to the [http://talk.maemo.org/showthread.php?t=87985 talk.maemo.org thread] page.

===FAQ===

'''Question'''

''How do I setup linux-swap?''

'''Answer'''

The easiest way is to use GParted on a desktop.
Then make two equally sized "linux-swap" partitions, 800MB is fine.
These partitions are best located after the first FAT partition.

The card will then have a FAT part (partition 1) swap1 (partition 2) and swap2 (partition 3).

'''Question'''

''Can we make FlopSwap run on a timer or schedule?''

'''Answer'''

Yes, you can call the swap refresh script from a shell or cron/alarmed

'''sudo /opt/flopswap/script/swapswitch.sh'''

'''Question'''

''FlopSwap shows a dialog message saying swap can no longer be calculated''

'''Answer'''

''Unfortunately you have reached the limit that the stock N900 shell can calculate. 
Use the timer method listed above to grab a fresh swap, while you sleep"

'''Question'''

''What type does the first partition have to be?''

'''Answer'''

FAT32 is recommended as this type will work on all variations of Maemo. There is no reason why other file systems cannot be used.

Even if an incorrect file type is used this will not effect the operation of FlopSwap. However the card may show as "corrupt" to the device, you therefore cannot use this to store data.

Currently tested first partition types are :-

'''FAT32, ext2 and ext3'''

==License/Disclaimer==

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (Version 2) as published by the Free Software.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

==To-Do==
<none>

==Changelog==
'''0.1.4'' (Current Devel) '''''
* Added initial start help text
* Delete QSettings due to incorrect permissions

'''0.1.3'''
* Change how swap spaces are located to fix UUID issue
* Added extra banner message during refresh

'''0.1.2'''
* Small UI changes
* Set labels in source

'''0.1.1'''
* Added Spinbox and QSetting for Swap Used Warning threshold

'''0.1.0'''
* Big changes to backend, so new version number
* Change to get swap locations from blkid
* Change upstart file to use blkid
* Support for CSSU upstart swap_sd in mount-ops-overwrite
* General clean up and small fixes

'''0.0.6'''
* Fix bug on Settings page stopping upstart file being created.

'''0.0.5'''
* int32 workarounds by peterleinchen
* Fix issue calculation issue after swapping to device

'''0.0.4'''
* Changed Check Usage to Status
* Changed scripts to work off swap written not swap used
* Removed rootsh and sudser from depends list now uses update.sudoers

'''0.0.3'''
* Added Keyboard shortcuts to Q,W,A and S keys.
* Added Check Swap Usage button.

'''0.0.2'''
* Added optional event.d upstart file (in settings menu)
* Depends rootsh and sudser due to new event.d file

'''0.0.1'''
* Initial Release

==Wiki Update==
[[User:sixwheeledbeast|sixwheeledbeast]] 23:45, 10 January 2014 (UTC)

[[Category:Software]]
[[Category:Qt]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/Flopswap"

Personal tools

Navigation

Views

Editing Flopswap

@@ Line 1: / Line 1: @@
 =Introduction=
-Flopswap is a Swap management Tool for N900.
+FlopSwap is a Swap management Tool for N900.
 It features as a GUI to refresh your devices Linux Swap to speed up your VM.
@@ Line 7: / Line 7: @@
 ===Partition Requirements===
-Before Flopswap will function your micro SD card needs setting up with two equally sized linux-swap partitions and one on the device (backup).
+Before FlopSwap will function your micro SD card needs setting up with two equally sized linux-swap partitions and one on the device (backup).
 If you have not removed the swap partition on your device the later will already be working.
@@ Line 20: / Line 20: @@
 A workaround to this is to disable and enable swap again - linuxswap filesystem content doesn't live through restarts, and once re-enabled, is written sequentially again.
-Flopswap does this by switching to a fresh swap space on every "reswap".
+FlopSwap does this by switching to a fresh swap space on every "reswap".
-By doing this it saves moving swap to B and back again, hence "Flopswap".
+By doing this it saves moving swap to B and back again, hence "FlopSwap".
 ===Main Swap Partition on Micro SD===
@@ Line 38: / Line 38: @@
 ==Installation==
-Flopswap can be found in the [[Extras]] repository and can be installed using the N900 Application Manager (HAM).
+The latest versions can be found in the [[Extras-Devel]] repository and can be installed using the N900 Application Manager (HAM).
 ==Operation==
@@ Line 87: / Line 87: @@
 '''Question'''
-''Can we make Flopswap run on a timer or schedule?''
+''Can we make FlopSwap run on a timer or schedule?''
 '''Answer'''
@@ Line 99: / Line 99: @@
 '''Question'''
-''Flopswap shows a dialog message saying swap can no longer be calculated''
+''FlopSwap shows a dialog message saying swap can no longer be calculated''
 '''Answer'''
@@ Line 132: / Line 132: @@
 ==Changelog==
-'''0.1.10'' (Extras-Devel)'''''
+'''0.1.4'' (Current Devel) '''''
-* Minor fixes to some scripts
-* Switch to external swap on boot enabled as default
-* Busy indication
-* Check status on start option (thanks pichlo)
-'''0.1.9'' (Extras)'''''
-* Bugfix - int32 workround fixed
-* Code cleanup
-'''0.1.8'''
-* Bugfix - Show Swap to Device banner once
-'''0.1.7
-* Update Instructions
-* Disable Check Status GUI button on int32
-'''0.1.6'''
-* Fixes to int32 overrun message
-* Add button icons
-* Minor fix to control file
-'''0.1.5'''
-* Fix typos
-'''0.1.4'''
 * Added initial start help text
 * Delete QSettings due to incorrect permissions