Editing Maemo 5/PR1.1.1

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

Maemo 5 PR1.1.1 is being released on February 16, 2010.

This update can be installed over the air. Below you will find additional technical details.

The Maemo 5 SDK and tools were not updated as this is just a minor release.

'''Not enough space?'''

There are reports that at least 42MB of free rootfs is needed for the update.
You have probably installed unstable software from Extras-devel or other source with weak quality control. The simple solution is to uninstall anything not coming from Ovi and maemo.org Extras. You can Backup the "Application list" before and restore it after the update.
ioquake3 ''must'' be uninstalled prior to updating, no matter your free space.

Here are some tips on how to free up space in rootfs: [[Free up rootfs space]]

'''Not possible over the air?'''

If the Application Manager asks you to connect the device to your PC it's probably because: 
* You have missed the PR1.0.1.
* You have been tweaking with unstable or conflicting software.

The easiest solution is to backup and flash your device ([http://wiki.maemo.org/Updating_the_firmware instructions]). Power users might be interested in troubleshooting the Linux way ([http://wiki.maemo.org/OTA_to_PR1.1_troubleshooting more instructions]).

== Included packages ==
 apt
 apt-transport-https
 cmt-firmware-rx51
 connui-conndlgs
 flasher
 hildon-application-manager
 icd2
 libas-protocol-0
 libconbtui0
 libconnui
 libgles2-sgx-img
 libicd2
 librtcom-call-ui0 
 locale-resolver-data
 Maemo5
 nolo
 opengles-sgx-img-common
 operator-wizard-settings
 osso-accounts-plugin-skype
 osso-applet-lanuageregional
 osso-wlan
 posix-locales
 rtcom-call-ui
 tablet-browser-controls
 tablet-browser-daemon
 tablet-browser-ui
 tablet-browser-view
 wl1251-firmware

=== Application manager ===
* Disables apt-get from installing ovi store content
* Enables .deb installation from file manager/browser/email/whatnot

=== locales ===
* Adds roughly 18 new regions

=== OpenGL ES 1.x ===
Passes conformity tests, so can be used for full blown game development.

== Community reports fixed ==

=== Connectivity ===
* [https://bugs.maemo.org/show_bug.cgi?id=6416 Wifi won't connect until rebooted...]
* [https://bugs.maemo.org/show_bug.cgi?id=6699 Vodafone Italy: Wrong APN is autoconfigured]

=== Core ===
* [https://bugs.maemo.org/show_bug.cgi?id=6816 OpenGL ES 1.1 should be supported]

=== Settings and Maintenance ===
* [https://bugs.maemo.org/show_bug.cgi?id=6153 apt-get segfaults when system has ran out of ptys]

=== System software ===
* [https://bugs.maemo.org/show_bug.cgi?id=6615 Battery Dies Under 6 Hours with Very Moderate Use (Static IP?)]

=== Telephony ===
* [https://bugs.maemo.org/show_bug.cgi?id=7757 wrong cmt-firmware-rx51 (cell modem) version in published firmware?]

[[Category:fremantle]][[Category:N900]][[Category:Firmware_Upgrade]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Ambox (view source) (semi-protected)
Template:Firmware update (edit)
Template:Maemo 5 firmware updates (view source) (semi-protected)

Retrieved from "http://wiki.maemo.org/Maemo_5/PR1.1.1"

Personal tools

Navigation

Views

Editing Maemo 5/PR1.1.1

@@ Line 1: / Line 1: @@
-{{Firmware update}}
+Maemo 5 PR1.1.1 is being released on February 16, 2010.
-Maemo 5 PR1.1.1 was released on February 16, 2010, and follows the earlier [[Maemo 5/PR1.1|PR 1.1]] update.
 This update can be installed over the air. Below you will find additional technical details.
 The Maemo 5 SDK and tools were not updated as this is just a minor release.
+'''Not enough space?'''
+There are reports that at least 42MB of free rootfs is needed for the update.
+You have probably installed unstable software from Extras-devel or other source with weak quality control. The simple solution is to uninstall anything not coming from Ovi and maemo.org Extras. You can Backup the "Application list" before and restore it after the update.
+ioquake3 ''must'' be uninstalled prior to updating, no matter your free space.
+Here are some tips on how to free up space in rootfs: [[Free up rootfs space]]
+'''Not possible over the air?'''
+If the Application Manager asks you to connect the device to your PC it's probably because:
+* You have missed the PR1.0.1.
+* You have been tweaking with unstable or conflicting software.
+The easiest solution is to backup and flash your device ([http://wiki.maemo.org/Updating_the_firmware instructions]). Power users might be interested in troubleshooting the Linux way ([http://wiki.maemo.org/OTA_to_PR1.1_troubleshooting more instructions]).
 == Included packages ==
@@ Line 65: / Line 80: @@
 * [https://bugs.maemo.org/show_bug.cgi?id=7757 wrong cmt-firmware-rx51 (cell modem) version in published firmware?]
-{{Maemo 5 firmware updates}}
+[[Category:fremantle]][[Category:N900]][[Category:Firmware_Upgrade]]
-[[Category:N900]]