Mer/Documentation/Making x86 Mer Bootable

stskeeps (Talk | contribs)
(New page: == Making a x86 Mer bootable == Partition your boot device, make a ext3 partition. In the following, sda1 is your ext3 partition and sda is your boot device. Only install this on a USB st...)
Newer edit →

Revision as of 00:34, 22 January 2009

Making a x86 Mer bootable

Partition your boot device, make a ext3 partition. In the following, sda1 is your ext3 partition and sda is your boot device. Only install this on a USB stick or whatever that you want to have possibly destroyed.

  • mkdir -p /mnt/mer
  • mkfs.ext3 /dev/sda1
  • mount -t ext3 /dev/sda1 /mnt/mer
  • Grab a release x86-generic tar.gz and put in /mnt/mer, tar pzvxf it from within /mnt/mer OR Use imager from above and sh imager targets/mer-x86-generic-only-fs /mnt/mer
  • grub-install --no-floppy --recheck --root-directory=/mnt/mer /dev/sda
  • chroot /mnt/mer update-grub
  • verify your /mnt/mer/boot/grub/menu.lst looks correct
  • umount /mnt/mer (if you can)
Retrieved from "http://wiki.maemo.org/Mer/Documentation/Making_x86_Mer_Bootable"