Editing Moving system directories to a flash card

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

'''This method is ''not recommended'', as it is more fragile, and less usable than straight flash booting. Please use the steps for [[booting from a flash card]] instead!'''

== Why move directories to a flash card ==
* you regularly run out of space while trying out new programs
* you don't want to reflash /home each time you reflash your tablet
* you would like the 'rwx' permissions logic also on the flash card
* you want a LARGE /home partition

== Alternative ==
[[Booting from a flash card]] allows you to have your entire system running from a flash card, and thus to have your Home directory limited only by the size of the flash card.

The reasons for doing this, rather than following the instructions here, are detailes in [[Talk:Ext2_file_system_on_flash_card_partition | the Talk: page]] of the page describing creating ext2 partitions for your tablet.

This page details the steps the author followed to solve a problem, and represents his personal experiences.

It is strongly advised that if you have these issues, that you try [[booting from a flash card]].

== Needed ==

* a working N800
* an internal flash card of 2Gigs or more.
* maybe a standalone linux desktop
* one hour and some [http://en.wikipedia.org/wiki/Roman_Chamomile chamomile]

== First time ==
=== Partitioning ===
[[Partitioning a flash card | Partition your flash card]], deciding how much space you want to reserve for /usr and how much for /home.

Suggested values for partition sizes are 500MB for /usr and 1.5GB for /home, respectively in partitions 2 and 3.  Leave a small FAT16 partition on the card in 1st position to prevent other systems considering that the card is corrupted and trying to "recover" it...

It is suggested that you leave the card in your N800.

=== Copying your data to the new file systems ===
After creating the partitions and initializing them, mount them at /mnt/usr and /mnt/home, and copy /usr/* and /home/* there, keeping file attributes:
 cp -a /usr/* /mnt/usr
 cp -a /home/* /mnt/home
Ensure your N800 is plugged in, since this operation will take some time.

=== Setting things up ===

First, reflash your tablet, after carefully backing up any data you will need later, to free up space in internal memory and get back to factory settings.

Then use the Application manager to remove packages which are safe to remove. Some examples of packages which can safely be removed are the Maemo tutorial and documentation packages.

Boot the system with flash card in place, and ensure that your old data is there. To do this, [[Root access | become root]] and create a custom boot script which will mount partitions from your flash card:
 #!/bin/sh
 
 # create the mount points for testing
 mkdir /mnt/usr
 mkdir /mnt/home
 
 # create the startup script
 cat > /etc/init.d/mount_custom << EOF
 insmod /mnt/initfs/lib/modules/2.6.21-omap1/mbcache.ko
 insmod /mnt/initfs/lib/modules/2.6.21-omap1/ext2.ko
 MOUNT_ROOT=/mnt/
 mount /dev/mmcblk0p2 ${MOUNT_ROOT}usr
 mount /dev/mmcblk0p3 ${MOUNT_ROOT}home
 EOF
 
 # register it for early execution
 chmod +x /etc/init.d/mount_custom
 cd /etc/init.d; for i in 2 3 4 5; do ln -s ../init.d/mount_custom /etc/rc$i.d/S15mount_custom ; done

Now reboot and check that /mnt/usr and /mnt/home contain your data.
You will need to re-copy your system files on top of your back-up of /usr to ensure a consisten system:
 cp -a /usr/* /mnt/usr
As before, this will take time and plug in your tablet.

Edit '''/etc/init.d/mount_custom''' again, setting '''MOUNT_ROOT=/''' and reboot if you dare.

Your flash card partitions will now be mounted at /usr and /home, and will hide the system directories underneath.

=== Restoring without a Backup ===

In a bare N8x0 after a reflash you will see an empty menu. You need to re-configure repositories and re-install all the applications you had before.

After following this procedure, when you re-flash your tablet, you should still see all of your applications and personal data, since /usr and /home will not be affected.

However, even though applications will show up in the menu, many applications will be missing configuration files or other data required to run, and you will probably need to restore them from a back-up before using them again.

The list of applications which appears in the application menu will serve as a list of applications which you should re-install after a re-flash.

=== Power Consumption ===

The power consumption of your tablet will be higher when using ext2 partitions on a Flash card, and your system will not work once the charge is too low to read/write the flash cards. This setup shortens your autonomy.

[[Category:N8x0]]
[[Category:Power users]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Templates used on this page:

Template:Ambox (view source) (semi-protected)
Template:Out of date (view source) (semi-protected)

Retrieved from "http://wiki.maemo.org/Moving_system_directories_to_a_flash_card"

Personal tools

Navigation

Views

Editing Moving system directories to a flash card

@@ Line 13: / Line 13: @@
 [[Booting from a flash card]] allows you to have your entire system running from a flash card, and thus to have your Home directory limited only by the size of the flash card.
-The reasons for doing this, rather than following the instructions here, are detailed in [[{{TALKPAGENAME}}| the discussion page]] of the page describing creating ext2 partitions for your tablet.
+The reasons for doing this, rather than following the instructions here, are detailes in [[Talk:Ext2_file_system_on_flash_card_partition | the Talk: page]] of the page describing creating ext2 partitions for your tablet.
 This page details the steps the author followed to solve a problem, and represents his personal experiences.
@@ Line 24: / Line 24: @@
 * an internal flash card of 2Gigs or more.
 * maybe a standalone linux desktop
-* one hour and some [[:wikipedia:Roman_Chamomile|chamomile]]
+* one hour and some [http://en.wikipedia.org/wiki/Roman_Chamomile chamomile]
 == First time ==