Overclocking N900

Image:Ambox_notice.png
Some instructions here may cause serious problems. When unsure, see General precautions
Backing up your data is recommended. In case of trouble you might need to re-flash your device.


Image:Ambox_notice.png
OVERCLOCKING CAN DESTROY YOUR DEVICE PERMANENTLY WARRANTY OF YOUR DEVICE WILL BE VOID


This article is for collecting information about overclocking procedure, Q&A, etc...

Contents

Warnings

  • Potential dangers that are hard to detect.[1]


- Overclocking WILL VOID YOUR WARRANTY
- The lifetime of your device will get reduced
- You could lose the data in your device (file system corruption)
- Every device is an individual, what is stable for others might not be for you
- If you encounter ANY unusual problems, lower your clock frequency
- You do it at your own responsibility. No whining afterwards. If you're unsure, don't do it.
- Nokia's overclocking warning: 500MHz is the normal frequency. Everything above is not good for your device, even with the stock kernel.
- Igor Stoppa's warning and comment - chip vendors specs

How to overclock

Overclocking is done by Reflashing a custom kernel into the device.

Step by step instructions

  1. Compile or download a custom kernel (sources?!?)
  2. Reflash the kernel to the device

Q & A

  • Sample question

sample answer