Overclocking N900

m (links)
Line 26: Line 26:
= How to overclock =
= How to overclock =
-
Overclocking is done by [[Reflashing]] a custom kernel into the device.
+
Overclocking is done by [[Updating the firmware|reflashing]] a custom kernel into the device.
=== Step by step instructions ===
=== Step by step instructions ===
# Compile or download a custom kernel (sources?!?)
# Compile or download a custom kernel (sources?!?)
-
# [[Reflashing|Reflash]] the kernel to the device
+
# [[Update the firmware|Reflash]] the kernel to the device
= How to undo overclocking =
= How to undo overclocking =
-
Run following command as [[root]]:
+
Run following command [[root access|as root]]:
  apt-get install --reinstall kernel kernel-flasher
  apt-get install --reinstall kernel kernel-flasher

Revision as of 13:06, 14 April 2010

Image:Ambox_notice.png
Some instructions here may cause serious problems. When unsure, see General precautions
Backing up your data is recommended. In case of trouble you might need to re-flash your device.


Image:Ambox_notice.png
OVERCLOCKING CAN DESTROY YOUR DEVICE PERMANENTLY WARRANTY OF YOUR DEVICE WILL BE VOID


This article is for collecting information about overclocking procedure, Q&A, etc...

Contents

Warnings

  • Potential dangers that are hard to detect.[1]
  • Overclocking WILL VOID YOUR WARRANTY
  • The lifetime of your device will get reduced
  • You could lose the data in your device (file system corruption)
  • Every device is an individual, what is stable for others might not be for you
  • If you encounter ANY unusual problems, lower your clock frequency
  • You do it at your own responsibility. No whining afterwards. If you're unsure, don't do it.
  • Nokia's overclocking warning]: 500MHz is the normal frequency. Everything above is not good for your device, even with the stock kernel [2]
  • Igor Stoppa's warning and comment
  • chip vendors specs

How to overclock

Overclocking is done by reflashing a custom kernel into the device.

Step by step instructions

  1. Compile or download a custom kernel (sources?!?)
  2. Reflash the kernel to the device


How to undo overclocking

Run following command as root:

apt-get install --reinstall kernel kernel-flasher


Q & A

  • Sample question

sample answer