Editing Partitioning a flash card

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

'''WARNING: Partitioning your flash card will delete all data of the card, so be sure to back up any important data to a computer or another flash card.'''

For N900 see [[Repartitioning_the_flash]] and [[Changing the eMMC filesystem]]

== Install the necessary packages and create partitions ==

'''Note:''' on the N800 and N810 the filesystem numbering can be a little confusing.

* The '''external''' card device is /dev/mmcblk1 (mounted at /media/mmc1)
* The '''internal''' card device is /dev/mmcblk0 (mounted at /media/mmc2)

So if you plan to format the external media card you will need to replace mmcblk0p with mmcblk1p in the recipe below.

First, you will need [[root access]].

In Xterm on your tablet, run:

apt-get install e2fsprogs
 umount /media/mmc1
 umount /media/mmc2
 sfdisk /dev/mmcblk0 << EOF
 1,15000,6
 15001,,
 
 
 EOF

'''** Note **''' "<< EOF" ''and'' "EOF" ''are NOT required text, blank lines are being entered to sfdisk's prompts for partition parameters. Keep pressing the Enter key until sfdisk has finished prompting for the partitions, then you will need to enter "y" to confirm you want to actually write the changes to the card.''

This example will create two partitions in a 1GB flash card: the first one is FAT16 (that's what number 6 means), and the second one is the default Linux native partition (83). If you are using a card larger than 2GB, use "c" (FAT32 LBA) instead of "6".  The size of the first one is almost 480MB (that's the meaning of the 15000), and the second one is sized till the end of the card (that's what ,, means). Partitions three and four are empty.

The arguments for [http://linux.die.net/man/8/sfdisk sfdisk] are: 
* The device node to use for the partition
* The start cylinder on the card
* The end cylinder on the card (leave blank to have the partition go to the end of the disk)
* The filesystem type ([http://www.win.tue.nl/~aeb/partitions/partition_types-1.html complete list])

A cylinder is a 32KB block on a flash card, so 15,000 cylinders equates to 480,000KB (approx. 480MB).

== Format the partitions ==

Once you have created the required partition table, you will need to initialise the filesystems.

Type as root:

mkdosfs /dev/mmcblk0p1
 shutdown -r now

After it reboots, then open Xterm and, as root, run:

mke2fs /dev/mmcblk0p2
 shutdown -r now

== Mounting the partitions ==

The VFAT partition will be mounted by the system automagically at start-up. To mount the EXT2 partition we need to load the kernel modules, so open Xterm and,  '''as root''', type:

insmod /mnt/initfs/lib/modules/$(uname -r)/mbcache.ko
 insmod /mnt/initfs/lib/modules/$(uname -r)/ext2.ko
 mount /dev/mmcblk0p2 /media/mmc2

(Note: /media/mmc2 will already have the VFAT partition mounted.  Perhaps we should create a directory in /media and mount to that instead?)

[[Category:Power users]]
[[Category:Wiki page of the day]]

[[Category:Power users]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/Partitioning_a_flash_card"

Personal tools

Navigation

Views

Editing Partitioning a flash card

@@ Line 10: / Line 10: @@
 * The '''internal''' card device is /dev/mmcblk0 (mounted at /media/mmc2)
-So if you plan to format the extern
+So if you plan to format the external media card you will need to replace mmcblk0p with mmcblk1p in the recipe below.
+First, you will need [[root access]].
+In Xterm on your tablet, run:
+ apt-get install e2fsprogs
+ umount /media/mmc1
   umount /media/mmc2
   sfdisk /dev/mmcblk0 << EOF
@@ Line 19: / Line 26: @@
   EOF
-'''** Note **''' "<< EOF" '' and'' "EOF" '' are required text if the commands are in a script file but are NOT entered if you are typing the commands into a terminal/shell. In the second case, sfdisk will require the Enter key be pressed, instead of blank lines, to sfdisk's prompts for any unused partitions. Keep pressing the Enter key until sfdisk has finished prompting for the partitions, then you will need to enter "y" to confirm you want to actually write the changes to the card.''
+'''** Note **''' "<< EOF" ''and'' "EOF" ''are NOT required text, blank lines are being entered to sfdisk's prompts for partition parameters. Keep pressing the Enter key until sfdisk has finished prompting for the partitions, then you will need to enter "y" to confirm you want to actually write the changes to the card.''
 This example will create two partitions in a 1GB flash card: the first one is FAT16 (that's what number 6 means), and the second one is the default Linux native partition (83). If you are using a card larger than 2GB, use "c" (FAT32 LBA) instead of "6".  The size of the first one is almost 480MB (that's the meaning of the 15000), and the second one is sized till the end of the card (that's what ,, means). Partitions three and four are empty.