Editing Streaming video from built-in webcam

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

It is possible to use the [[Nokia N800|N800]] and [[Nokia N900|N900]] camera as a source of streaming video.

== N800 ==

This was originally described [https://maemo.org/community/wiki/howtostreamvideo/ here], but the referenced example has an error which prevents it from working.

This note describes how to stream video from the platform to an RTP sink, for example the [[VLC]] media player.

First, you must install the '''gstreamer-tools''' package from the diablo repo on repository.maemo.org.

* On the N800, the following script will stream video from the camera. Here, 172.31.0.244 is the Linux box with VLC installed, and 172.31.0.245 is the N800. I call this script <code>~/bin/rtpstream.sh</code>.
 #!/bin/sh
 VPORT=5434
 APORT=5432
 HOST=${1:-172.31.0.244}
 gst-launch-0.10 v4l2src ! video/x-raw-yuv,width=176,height=144,framerate=$fraction$15/1 ! hantro4200enc stream-type=1 profile-and-level=1001 ! video/x-h263,framerate=$fraction$15/1 ! rtph263ppay mtu=1438 ! udpsink host=$HOST port=$VPORT dsppcmsrc ! queue ! audio/x-raw-int,channels=1,rate=8000 ! mulawenc ! rtppcmupay mtu=1438 ! udpsink host=$HOST port=$APORT

* On the Linux box, the sample .sdp file from [http://web.media.mit.edu/%7Elifton/snippets/n800_to_sl/ the original article], with the address of our VLC player, saved as a file i.e. <code>/tmp/n800.sdp</code>
 v=0
 o=- 37 614155991 IN IP4 127.0.0.0
 s=QuickTime
 t=0 0
 a=range:npt=now-
 m=audio 5432 RTP/AVP 0
 c=IN IP4 172.31.0.245
 b=AS:63
 m=video 5434 RTP/AVP 96
 c=IN IP4 172.31.0.245
 a=rtpmap:96 H263-2000/90000
 a=fmtp:96
 a=cliprect:0,0,144,176
 a=framesize:96 176-144
* On the N800, pop out the camera and run:
 $ ~/bin/rtpstream.sh 
assume on PATH, +x etc.
* On Linux box (note VLC runs on other platforms as well):
 $ vlc /tmp/n800.sdp
* Enjoy streaming video (and sound) from the N800.

Thanks to [http://web.media.mit.edu/%7Elifton/snippets/n800_to_sl/ Josh Lifton] for the original leg wor

== N900 ==

The instructions for the N900 are very similar to the N800.
First install gstreamer-tools.

$ apt-get install gstreamer-tools

Note: on PC you might need to replace gst-launch by gst-launch-0.10 in the examples below

To access the back camera use:
 ''/dev/video0''
 for the front
 ''/dev/video1''

In the example below the IP for the two devices are as follows
*PC IP 192.168.1.101
*N900 IP 192.168.1.105

On the N900 the command you want to run is:

$ gst-launch v4l2src device=/dev/video0 ! videoscale! video/x-raw-yuv,width=320,height=240 ! ffmpegcolorspace ! jpegenc ! tcpserversink host=192.168.1.101 port=5000

On the PC run

$ gst-launch tcpclientsrc host=192.168.1.105 port=5000  ! jpegdec ! autovideosink

The below also works
 '''N900'''

$ gst-launch v4l2camsrc device=/dev/video0 ! videoscale! video/x-raw-yuv,width=320,height=240 ! ffmpegcolorspace ! jpegenc ! tcpserversink host=192.168.1.101 port=5000

Another example using a different encoder/decoder and udp
 '''N900'''

$ gst-launch v4l2src device=/dev/video0 ! videoscale ! video/x-raw-yuv,width=320,height=240 ! ffmpegcolorspace ! smokeenc ! udpsink host=192.168.1.101 port=5000

'''PC'''

$ gst-launch udpsrc port=5000 ! smokedec ! autovideosink

Another example using omap3cam driver
 '''N900'''

$ gst-launch-0.10 v4l2camsrc device=/dev/video0 driver-name=omap3cam ! videoscale ! video/x-raw-yuv,width=320,height=240 ! ffmpegcolorspace ! jpegenc ! tcpserversink host=192.168.1.101 port=5000

'''PC'''

$ gst-launch tcpclientsrc host=192.168.1.105 port=5000  ! jpegdec ! autovideosink

There are many ways to skin this particular cat. Recommendations are to look at [http://www.gstreamer.net/ gstreamer] and familiarise yourself.

To stream from the N900 to VLC follow these [http://blog.pclewis.com/2010/02/streaming-nokia-n900-camera-to-vlc/ instructions]

=== For the future ===
=====vloopback=====
http://talk.maemo.org/showthread.php?t=26288
http://tektipsentriks.blogspot.com/2010/05/how-to-install-vloopback-on-ubuntu.html

===Webcam threads===
http://talk.maemo.org/showthread.php?t=31567
http://talk.maemo.org/showthread.php?t=46046

===Flumotion mention===
http://talk.maemo.org/showthread.php?t=31567&page=7
extras-devel 
http://maemo.org/packages/package_instance/view/fremantle_extras-devel_free_i386/flumotion/0.7.0.1-1maemo4/

== Streaming over ssh N900 ==

Here is an alternative way of streaming video on the [[Nokia N900|N900]] over ssh.

First get ssh to do X11 forwarding by installing xauth as follows:

# Install libxmuu1 (needed by xauth) by "apt-get install libxmuu1"
# Install the xauth from https://bugs.maemo.org/show_bug.cgi?id=2494

Now ssh to your N900 with the flag "-X" and then give the command:

gst-launch-0.10 v4l2src \
  ! videoscale ! video/x-raw-yuv,width=320,height=240 \
  ! xvimagesink

A 320x240 video window should now popup on your desktop.

[[Category:Connectivity]]
[[Category:Media]]
[[Category:Power users]]

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/Streaming_video_from_built-in_webcam"

@@ Line 41: / Line 41: @@
 Thanks to [http://web.media.mit.edu/%7Elifton/snippets/n800_to_sl/ Josh Lifton] for the original leg wor
-On a N800, to make the image vertically flip automatically when the camera's pointing backwards (so it's not upside-down), change the source name from "v4l2src" to "gconfv4l2src".
-To adjust the video encoding quality, have a look at the parameters described by entering "gst-inspect hantro4200enc" at a shell prompt.  Setting the "bit-rate" parameter to its maximum (515) and the "profile-and-level" parameter to 1007 produces a much better quality image.  Also, I suspect the "stream-type" parameter should be "5" (H263), not "1" (MPEG4 Video).

Personal tools

Navigation

Views

Editing Streaming video from built-in webcam