Editing User:Nbc/W32g

Warning: You are not logged in. Your IP address will be recorded in this page's edit history.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Learn more about Contributing to the wiki.

= What is it =

w32g is a dbus script to toggle 2g/3g when connected/disconnected to wifi.

If there's a call, it will delay the toggling.

= Configuration =

The configuration documentation is at the beginning w32g.conf. You can copy it to /home/user/.w32g.conf and modify it :

[w32g]
  
  ### the comment reflect the default configuration
  ### true is true (case insensitive), everything else is false
  
  ### the command used to test the wifi connection before downgrading to 2g
  ### if you don't want to do test just delete after =
  # connection_test = sudo /bin/ping -c 1 www.google.com
  
  ### notification message when going to 3g
  # message_on_idle = 3G cellular mode set
  ### notification message when going to 2g
  # message_on_connected = 2G (GSM) cellular mode set
  
  ### shall we go back to 3g when wlan disconnect ?
  #### if you want to have false just delete after =
  # change_on_idle = true
  ### shall we go back to dual or 3g ?
  # change_to_dual = true
  
  ### if you want go to 2g only when connected to some wlan you can add their wlan id here
  ### you can find the wlan id using the command 
  ### gconftool-2 -R /system/osso/connectivity/IAP
  ### For example :
  ### wifi = 91f493fb-7c89-4fc6-ac2c-b822923dde45 9ee5dd55-9a32-4ee9-9131-c464ad31d907
  # wifi =

= Script =

And you must copy the program to /home/user/bin/w32g and follow instruction below :

#!/usr/bin/python
  
  # You need to install dbus-scripts (BE CAREFUL, it's a devel package)
  # 
  # as root you need to create a file /etc/sudoers.d/w32g
  # with this line :
  #   user ALL = NOPASSWD: /bin/ping
  # and run the command update-sudoers because only root can use ping
  # 
  # always as root and you need to create another file
  # /etc/dbus-scripts/w32g with the following line : 
  #
  #   /home/user/bin/w32g * * com.nokia.icd status_changed * WLAN_INFRA *
  #
  # and copy this script in /home/user/bin/w32g
  
  import sys
  import os
  import ConfigParser
  import re
  import commands
  import time 
  
  debug = False
  
  conf_file = '/home/user/.w32g.conf'
  
  config = { 'message_on_idle': '3G cellular mode set',
    'message_on_connected': '2G (GSM) cellular mode set',
    'connection_test': 'sudo /bin/ping -c 1 www.google.com',
    'change_on_idle': 'true',
    'change_to_dual': 'true',
    'wait_on_call': 10,
    'wifi': ''
  }
  
  config_parser = ConfigParser.SafeConfigParser()
  
  try:
      config_parser.read(conf_file)
      for item in config_parser.items('w32g'):
          config[ item[0] ] = item[1]
  except ConfigParser.NoSectionError:
      pass
  
  def to_bool(string):
      if re.search('true', string, re.IGNORECASE):
          return True
  
  config['change_on_idle'] = to_bool(config['change_on_idle'])
  config['change_to_dual'] = to_bool(config['change_to_dual'])
  config['wait_on_call']   = int(config['wait_on_call'])
  
  wifi_id,state = sys.argv[5],sys.argv[7]
  
  # if we are not on the good wifi network we do nothing and exit
  if config['wifi'] and not re.search(wifi_id, config['wifi'], re.IGNORECASE):
      if debug: print "not the good wifi network, exit"
      sys.exit(0)
  
  dbus_wifi = "dbus-send --system --type=method_call --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.set_selected_radio_access_technology";
  
  dbus_notif = "dbus-send --system --type=method_call --print-reply --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint";
  
  dbus_test_call = "dbus-send --system --dest=com.nokia.csd.Call --print-reply=literal /com/nokia/csd/call/1 com.nokia.csd.Call.Instance.GetStatus"
  
  def is_on_call():
      output = commands.getoutput(dbus_test_call)
      return "uint32 0" in output
  
  def wait_or_exit_on_call():
      if debug: print "in wait or exit on call"
      choice = config['wait_on_call']
      if choice > 0:
          end = time.time() + choice
          while end > time.time():
              if is_on_call(): return
              if debug: print "wait"
              time.sleep(1)
          sys.exit()
      else:
          sys.exit()
          
  if state == 'CONNECTED':
      if debug: print "CONNECTED STATE"
      # we verified that the connection works
      if config['connection_test']:
          ret = os.system(config['connection_test']);
      else:
          ret = 0
  
      # we wait or exit if there's a call
      wait_or_exit_on_call()
  
      if ret == 0:
          os.system(dbus_wifi + " byte:1");
          os.system(dbus_notif + " string:'" + config['message_on_connected'] + "'")
  
  elif state == 'IDLE' and config['change_on_idle']:
      if debug: print "IDLE STATE"
      dual = "2"
      if config['change_to_dual']: dual = "0"
      print dual
  
      # we wait or exit if there's a call
      wait_or_exit_on_call()
  
      os.system(dbus_wifi + " byte:" + dual);
      os.system(dbus_notif + " string:'" + config['message_on_idle'] + "'")
  
  print state
  
  if debug: print "end here"

Please note that all contributions to maemo.org wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see maemo.org wiki:Copyrights for details). Do not submit copyrighted work without permission!

Summary:

Cancel | Editing help (opens in new window)

Retrieved from "http://wiki.maemo.org/User:Nbc/W32g"

Personal tools

Navigation

Views

Editing User:Nbc/W32g

@@ Line 28: / Line 28: @@
    ### shall we go back to dual or 3g ?
    # change_to_dual = true
-  ### if wait_on_call is a integer greater than 0, the program will wait
-  ### all this time to toggle to 2g/3g. After this time it will exit
-  ### without toggling.
-  ### if wait_on_call is 0 or lesser, w32g will exit without toggling
-  # wait_on_call = 90
    ### if you want go to 2g only when connected to some wlan you can add their wlan id here
@@ Line 40: / Line 34: @@
    ### For example :
    ### wifi = 91f493fb-7c89-4fc6-ac2c-b822923dde45 9ee5dd55-9a32-4ee9-9131-c464ad31d907
    # wifi =
 = Script =